Kettler HAPPY PRINCESSIN NAVIGATOR 08838-790 Assembly Instructions Manual

Assembly Instructions

„HAPPY PRINZESSIN NAVIGATOR“

Item # 08838-790

KETTLER®International Inc. ·1355 London Bridge Road · Virginia Beach · Virginia VA 23453 USA

www.kettlerusa.com
[e-mail]

La asamblea del adulto requirió.

Montage par une personne adulte.

Printed on 100% recycled paper.!

Adult Assembly Required

picture similar

USA

F

E

This KETTLER product has been designed in accordance with the latest standards of safety
and subjected to constant quality monitoring. The data gained from this quality process is
then incorporated in the development of our products. For this reason, we reserve the right
to make changes in design and technology in order to offer our customers products of the
highest standard of quality at all times. In spite of this, should you have any ground for com­plaint, please contact your KETTLER dealer.

For your safety

■ This toy vehicle should be used for its intended purpose only, i.e. one (1) child only. It should
not be used in any other way, as this may be dangerous. The manufacturer cannot be held
liable for damage or injury caused by incorrect use.

■ This item is not intended for commercial use.

■ This product is a toy and is not suitable for use in traffic or on public roads.

■ Always keep a watchful eye on your child in order to avoid risks by thoughtless and hasty

movements.

■ Please care for the fact that the tricycle is only used on safe ground.

■ The tricycle is an unlighted play implement. Its use in the dark is dangerous.

■ In case of a sudden and/or strong turn of the handlebar the tricycle could be caused to tip.

Danger of injuries!

■ The tricycle must not be connected with other vehicles, sports or similar devices and not be
driven/pulled by them. Never subject your child on the tricycle to speeds exceeding wal­king pace!

■ We recommend that a child using the tricycle should wear a child's bicycle helmet.

■ Damaged components may endanger the safety of your child or shorten the lifespan of the

product. Inspect it at regular intervals to ensure that none of the components are damaged
and that none of the bolts or other joints have worked loose.

■ Replace worn or damaged parts immediately and ensure that the product is not used again
until this has been done. If any parts require replacement, use only original spares manu­factured by KETTLER.

■ This child’s wheeled toy conforms to the stipulated safety regulations European standard EN
71-1/3 („Safety regulations for childrens toys“, max. weight of user: 110 lbs). Incorrect
repairs or alterations (removal of original parts or addition of other parts etc.) may be a
source of danger to the user.

■ This product is suitable for children between 1 - 5 years.

■ Concerning products with pneumatic tyres: tighten the valve caps at all times and keep

off children's reach (Choking hazard - contains small parts).

■ Caution: While assembly of the product keep off children’s reach (Choking hazard ­contains small parts).

Assembly Instructions

Read these instructions carefully before assembling the product or using it for the first time. They
contain important information for your safety and for the correct use and maintenance of this
KETTLER product. Keep the instructions in a safe place for information or for ordering spare parts.

2

USA

!

!

Use of the Toy

■

WARNING

: Adult supervision is required. Never use near steps, slopes, driveways,
hills, roadways, alleys or swimming pool areas. Always wear shoes. Never allow more
than one rider (without a tandem seat). The use of protective gear and a Safety Helmet is
highly recommended.

■ Ensure that the toy vehicle is not used until it has been properly assembled and checked by
an adult person.

■ In case of tricycles without a free-wheel consider the fact that the pedals will rotate even
when the tricycle is pushed.

■ Do not transport any objects on the tricycle.

■ Always adjust the use of the tricycle to the conditions encountered.

■ Tricycles do not possess a continuously effective brake system. Therefore, safeguard the tri-

cycle against rolling away

■ Never draw the tricycle behind you as long as a child is seated on it.

■ Instruct your child how to use the vehicle correctly and draw attention to possible sources

of danger.

■ Although dangerous situations are unlikely to occur if the toy is used correctly, children at
play should, if possible, be supervised.

■ Please bear in mind that there is always a danger of children injuring themselves while
using swings, climbing frames,toy vehicles or similar equipment.

■ When using the toy vehicle, the user should always wear strong shoes.

■ Instruct your child how to use the vehicle correctly and draw attention to possible sources

of danger.

■ When children are at play, situations may arise which cannot be predicted by the manu­facturer and for which he cannot be held responsible.

■ Before use, always check all screws and plug-in connections as well as respective safety
devices fit correctly.

■ Never use corrosive or abrasive substances to clean the toy. Never use substances which
may cause pollution of the environment.

■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil
every two or three months.

■ Due to the nature of materials used in pneumatic tyres on KETTLER toys, it is not recom­mended for the product to be left in any one place for too long where solvents or other che­micals, i. e. petrol, may lie. This may result in a chemical reaction, which could cause the
tyres to mark the surface such as a vinyl flooring. If in doubt put something underneath the
wheels to cover the floor.

■ For models with push bars: Always ensure that the push bar fits correctly in the adaptor,
and locks. Do not hang any weights on the bar! The vehicle may tip over, and your child
may be hurt. The push bar is intended for adult use only, do not pass responsibility for chil­dren on to other children. For free play time take the push bar off for safety reasons.

■ Attention: when children play alone with this wheeled toy, lock the steering of the rear axle
(see handling)!

3

!

USA

4

The manufacturer reserves the right to make changes reflecting product or
other technical advances. The content of these instructions is accurate at the
date of printing.

USA

Assembly of the toy vehicle

■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc­tions carefully before beginning work. Assemble the vehicle in the exact sequence shown
by the letters in the diagrams. This is essential for the safe function and use of the tricycle.

■ Please note that there is

always

a danger of injury when working with tools or doing

manual work. Therefore please be careful when assembling this machine.

■ Ensure that your working area is free of possible sources of danger, for example don’t

leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with
plastic bags!

■ Bolt all the parts together loosely at first, and check that they have been assembled cor­rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to final-
ly tighten nuts completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is destroyed), and
must be replaced.

■ The grips can be pushed onto the handlebars more easily if they are first soaked in warm
water.

■ Please keep original packaging of this article, so that it may be used for transport at a later

date, if necessary.

■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).

■ When ordering spare parts, always state the full item number, spare-part number, the
quantity required and the serial number of the product..

Example order: item # 08838-790 / spare part no. 12802003 / 1 piece/ S/N ...
Important: spare part prices do not include fastening material; if fastening material (bolts,

nuts, washers etc.) is required, this should be clearly stated on the
order by adding the words „with fastening material“.

KETTLER®International Inc., 1355 London Bridge Road · Virginia Beach VA 23453
For parts or service ONLY call 1-866-804-0440 or send e-mail to:

[e-mail]

call [phone] fax [phone].

www.kettlerusa.com

[e-mail]

12

Checklist Liste de contrôle Lista de verificación

2

2

1

1

1

1

1

1

1

1

1

1

1

1
1

1/1

1

1

1
1
1

1

1
2

4

M6x25mm

M6x65mm

M12

4,8 x16 mm

3,9 x16 mm

4,2 x16 mm

M 5x10 mm

5

2

2

1

2

4 x16 mm

1/1

M6x35mm

1

13

1

!

!

C

D

KLACK ...

!

ACTUAL SIZE

ACTUAL SIZE

DIMENSIONS RÉELLES

DIMENSIONS RÉELLES

TAMAÑO ACTUAL

TAMAÑO ACTUAL

!

B

ACTUAL SIZE

ACTUAL SIZE

DIMENSIONS RÉELLES

DIMENSIONS RÉELLES

TAMAÑO ACTUAL

TAMAÑO ACTUAL

2

3

A