Kettler Giro GT Assembly Instructions Manual

Der Umwelt zuliebe: wir drucken auf 100% Altpapier!

Abb. ähnlich

A 115 cm
B60cm
C 110 cm

51,8 kg

max.

130 kg

A

C

B

20 – 30 Min.

CZ

D

GB

SK

SLO

H

HR

RO

BG

SRB

GR

Montageanleitung „Giro GT“

Art.-Nr. 07639-500

4

Handling the equipment

ATTENTION! It is not recommended to use or store the appa-

ratus in a damp room as this may cause it to rust. The friction
surface of the flywheel is especially sensitive to the formation of
rust. Should this occur (e.g. after a prolonged period of disuse)
the rust should be removed using sandpaper or steel wool. Do
not use grease or oil! Please ensure that no part of the machine
comes in contact with liquids (drinks, perspiration etc.). This
may cause corrosion.

■ Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.

■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit..

■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre­dictably and dangerous situations may occur for which the

manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.

■ A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon ope­ration. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

■ Use for your regular cleaning, maintenance and care our
appliance maintenance set (Article no. 07921-000) specifi­cally licensed for KETTLER Sports apparatus and available from
the Sport specialized trade.

■ After your training by all means turn the turning handle for brake
adjustment back to zero position in order to avoid heat influences
on brake linings and disk flywheel.

Assembly Instructions

GB

Before assembling or using the exercise cycle , please read the following instructions carefully.
They contain important information for use and maintenance of the equipment as well as for your
personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering
spare parts.

For Your Safety

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! Instruct persons using the equipment (in particular children)

on possible sources of danger during exercising.

RISK! Heart rate monitoring systems can be imprecise. Excessive

training may lead to serious health damage or death. If you feel
giddy or weak, please stop the training immediately.

WARNING! Exercise should be used only for its intended

purpose, i.e. for physical exercise by adult persons.

WARNING! Any other use of the equipment is prohibited and

may be dangerous. The manufacturer cannot be held liable for
damage or injury caused by improper use of the equipment.

WARNING! After your training by all means turn the turning

handle for brake adjustment back to zero position in order to
avoid heat influ ences on brake linings and disk flywheel.Pay
attention to the fact that the quickly rotating disk flywheel
strongly heats during operation.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! All electric appliances emit electromagnetic radi-

ation when in operation. Please do not leave especially radi­ation-intensive appliances (e.g. mobile telephones) directly next
to the cockpit or the electronic controlsystem as otherwise
values displayed might be distorted (e.g. pulse measurement).

■ Exercise has been designed in accordance with the latest stan­dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.

■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.

■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged parts

should be replaced immediately and the equipment taken out of
use until this has been done. Use only original KETTLER spare parts.

■ If the equipment is in regular use, check all its components thor-

oughly every 1 -2 months. Pay particular attention to the
tightness of bolts and nuts.This applies especially to the securing
bolts for saddle and handelbars.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.

■ Before beginning your program of exercise, consult your doctor

to ensure that you are fit enough to use the equipment. Base your

program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!

■ Any interference with parts of the product that are not described

within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by
KETTLER.

■ In case of enquiry, please contact your KETTLER dealer.

■ In choosing the location of the apparatus, ensure a sufficient safety

distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors).

■ For a comfortable training position please adjust the handlebar
andsaddle position to your body height.

■ When mounting the product please take the recommended

torque information into account (M = xx Nm).

■ The exercise cycle complies with the DIN EN 957 - 1/- 5 class

HC. It is therefore unsuitable for therapeutic use.

!!!!!!!!!

5

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if
children play with plastic bags!

■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos­sible technically talented.

■ Please note that there is

always

a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.

■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.

■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly.Attention: once
locknuts have been unscrewed they no longer function cor­rectly (the locking device is destroyed), and must be replaced.

■ For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).

■ To operate correctly, the pulse function requires a minimum
voltage of 2,7 volts (only for computers working with batteries).

■ The equipment is dependent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the machine

or the electronics.

■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.

■ The brake linings should also be checked at regular intervals
and adjusted as necessary.

■ Always wear suitable shoes when using.

■ Nobody may be in the moving range of a training person

during training.

Attention! Due to a special lacquer which ensures a high level

of durability of the generator and the flywheel, an odour may
develop during your first training units with your new home sports
equipment. However, the odour will disappear after several
training units.

Please excuse us for the odour. We hope you will enjoy your
training with your new KETTLER home sports equipment.

!

List of spare parts page 28-29

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).

Example order: Art.no.07639-500 / spare-part no. 68008204

/ 1 pieces / S/N ....................

Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original
box if possible.

It is important to provide a detailed defect description / damage
report!

Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening

material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

[phone] [phone]

www.kettler.co.uk Mail: [e-mail]

KETTLER International Inc.

1355 London Bridge Road [phone]
Virginia Beach, VA 23453 [phone]

www.kettlerusa.com

USA

GB

!

24

Checkliste (Packungsinhalt)

– GB – Checklist (contents of packaging)
– CZ – Kontrolní seznam (obsah balení)
– SK – Kontrolný zoznam (obsah balenia)

– H – (Csomagolás tartalmának) ellenőrző listája

– SLO – Kontrolni seznam (vsebina embalaže)

– HR – Kontrolni popis (sadržaj pakovanja)
– RO – Lista de verificare (conţinutul pachetului)

– BG – Списък за проверка (съдържание на опаковката)

– SRB – Ček-lista (sadržaj pakovanja)

–GR – Κατάλογος ελέγχου (;εριεχόµενο συσκευασίας)

1

1

1

1

1

1

1

M 5x12

ø 8/19

M 8x60

1

4

4

4

1/1

Stck.

29

Pos. 28

2x M5x12

4x 3x8

4x 3x20

4x M5x10