Kettler 8718-710-720-730-750 User Manual
ier!
GB
D
F
NL
E
I
PL
ASSEBMBLY
INSTRUCTIONS
Model No.
8718-710-720-730-750
Picture Similar
This KETTLER product has been designed in accordance with the latest standards of safety and
subjected to constant quality monitoring. The data gained from this quality process is then incorporated in the development of our products. For this reason, we reserve the right to make changes in design and technology in order to offer our customers products of the highest standard of
quality at all times. In spite of this, should you have any ground for complaint, please contact
your KETTLER dealer.
For your safety
Attention: An adult should always supervise playing. Only one child may use this product. Do
not use the wheeled toy near slopes, steps, roads, railways, lakes and rivers, etc. Sturdy footwear should be worn at all times. We recommend wearing suitable protective clothing and a
safety helmet.
This toy is designed only for private use (no commercial or public use).
This product may only be used for the intended purpose, i.e. as a wheeled toy to be used by
one (1) child. All other use is not permitted, and possibly dangerous. The manufacturer cannot be held responsible for damages caused by improper use.
Damaged parts may endanger the user and shorten the life span of the product. Please check
all parts regularly, in short intervals according to use, for possible damages and loose connections (screws, plug-in connections).
Damaged or worn parts must be replaced straight away and the vehicle must be withdrawn
from use until repaired. If required please only use original KETTLER spare parts.
This child’s wheeled toy conforms to the stipulated safety regulations Europe standard EN 71-
1/3 („Safety regulaions for childrens toys“)
Improper repairs and structural alterations (disassembly of original parts, fitting of not permit-
ted parts, etc.) may cause danger for the user or affect the life span of the product.
Please ensure that the vehicle will only be used for playing when assembly has been carried
out correctly, and checked, by an adult.
Although there is practically no danger to children when using the vehicle according to its
intended purpose, you should always supervise play activities.
As the product is only a toy it should not be used on public roads, because it does not con-
form to the road traffic regulations.
Please bear in mind that there is always a danger of children injuring themselves (falling off,
tipping over etc.) whilst using swings, climbing frames, tricycles or similar equipment.
Do not connect this toy to any other product; because this child’s wheeled toy has not been
designed for higher speeds.
Please bear in mind that children are very often not able to judge their own capabilities and
certain (dangerous) situations. Also consider that a natural urge to play plus their temperament
may lead children into unforeseen situations for which the manufacturer cannot be held
responsible.
Please ensure that the wheeled toy is only used in surroundings free of danger.
Assembly Instructions
Read these instructions carefully before assembling the product or using it for the first time. They
contain important information for your safety and for the correct use and maintenance of this KETTLER product. Keep the instructions in a safe place for information or for ordering spare parts.
GB
2
3
This wheeled toy does not have lights. It is dangerous to use it in the dark.
Caution: While assembly of the product keep off children’s reach (Choking hazard - con-
tains small parts).
Concerning products with pneumatic tyres: tighten the valve caps at all times and keep off
children's reach (Choking hazard - contains small parts).
Handling
Before use always check that all screws and plug-in connections and respective safety devi-
ces fit correctly.
Instruct children in the correct use of the product, and draw their attention to possible dan-
gers.
Sturdy, closed footwear must be worn when using this product.
This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle
against rolling away. Do not leave children, who are not old enough to use the wheeled toy,
unattended on a product.
If this product can be adjusted please adapt it to your child’s height.
Do not transport anything on this product.
Never use corrosive or abrasive substances to clean the toy. Never use substances which may
cause pollution of the environment.
Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every
two or three months.
For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on floors
containing solvents or which have been glued with such solvents (e.g. PVC) they may possibly stain it due to a chemical reaction with the natural product caoutchouc. If in doubt place
something underneath the wheels. Ensure that air pressure in the tyres is correct (1,5 bar); if
air pressure is too low this increases wear, and makes riding the toy more difficult!
Assembly of the toy vehicle
The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc-
tions carefully before beginning work. Assemble the vehicle in the exact sequence shown by
the letters in the diagrams. This is essential for the safe function and use of the toy vehicle.
Please note that there is
always
a danger of injury when working with tools or doing manu-
al work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don’t leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have
been tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
When assembling plastic grips: The grips can be pushed onto the handlebars more easily if
they are first soaked in warm water.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addi-
GB
!
!
4
GB
tion of tubing plugs).
List of spare parts page 13-14
When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see handling).
Example order: Art. no. 08718-710-720-730-750 / spare-part no. 68005121 / 1 pieces /
S/N ....................
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is
safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the words
„with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
Limited Warranty
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE
MANUFACTURER ON KETTLER®PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRANTY
AGAINST DEFECTS IN MATERIAL SET OUT BELOW:
This KETTLER®Limited Warranty applies to products sold through the KETTLER®Authorized Dealer
Network to the original retail purchaser and authenticated by proof of purchase from a retailer located in
the United States. Any shipments made under this warranty will be shipped to the United States only. Any
shipment outside of the United States will be at the sole cost of the customer. This KETTLER®Limited
Warranty is a manufacturer’s warranty and is not changed or modified by additional warranties extended
by individual retailers at the point of sale. Manufacturer warrants this product to be free from defects in
material at the time of the product’s tender of delivery for a period of 1 year for residential use. This Limited
Warranty is not transferable and does not cover normal wear and tear (including, but not limited to, damage
and wear to tires, power shocks, drive belts and other non-durable parts). The liability of the manufacturer
under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages
resulting from the defect. This Limited Warranty is void if the product is damaged by accident,
unreasonable use, improper service, failure to follow instructions provided, modification from its
original state, or other causes determined not arising out of defects in material.
This warranty gives you specific legal rights. Should this product become defective due to material within
the warranty period, contact KETTLER®Parts & Service Dept. by phone at 866.804.0440, fax at
757.563.9273, or e-mail at parts@kettlerusa.com.
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE
MANUFACTURER. KETTLER®NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH SUCH PRODUCTS.
Ordering Spare Parts
Contact:
KETTLER®International Inc., 1355 London Bridge Road, Virginia Beach, VA 23453 USA
Online: www.kettlerusa.com
E-mail: info@kettlerusa.com
For parts/service ONLY: call 866-804-0440 or e-mail parts@kettlerusa.com
5
Loading...