Kettler 7976-300, 7976-400 User Manual

Assembly and User Manual
R-400 ROWER
Model #7976-400 / #7976-300
Adult Assembly Required
Picture Similar
KETTLER® International Inc
1355 London Bridge Rd.
Virginia Beach, VA 23453 USA
Email: parts@kettlerusa.com
Web Address: www.kettlerusa.com
ASSEMBLY INSTRUCTIONS
Read these instructions carefully before assembling the product or using it for the first time. They contain important information for your safety and for the correct use and maintenance of this product. Keep the instructions in a safe place for information or for ordering spare parts.
For your safety
The unit should be used only for its intended purpose, i.e. for physical exercise by adult persons. Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment.
This unit has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible.
Incorrect repairs and structural modifications (e.g. removal or replacement of original parts) may endanger the safety of the user.
Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the
equipment taken out of use until this has been done. Use only original KETTLER spare parts.
In case of inquiry, please contact KETTLER.
If the equipment is in regular use, check all its components thoroughly every 1 – 2 months. Pay particular attention to the tightness of bolts and nuts.
Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by
your doctor. Incorrect or excessive exercise may damage your health!
Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine.
Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.
Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts).
Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
Our products are subject to a constant innovative quality assurance. We reserve the right to perform technical modifications.
Attention! The unit should be positioned in such a way that there is a space of 100 cm (49 in) on both sides and 150 cm (59 in) behind it.
The unit requires a power supply. Before commissioning the appliance pay attention to the fact that the correct plug-in power supply unit (observe marking) has been connected properly.
Important: disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.
When the unit is not in use, unplug it from the power supply.
Ensure that the power cable is not pinched and that no one can trip over it.
All electric appliances emit electromagnetic radiation when in operation. Please do not leave radiation-intensive appliances (e.g. mobile telephones) directly next to the
cockpit or the electronic control system as otherwise values displayed might be distorted (e.g. pulse measurement).
Always observe the general safety rules and precautions for working with electrical equipment.
Handling the equipment
Before using the equipment for exercise, check carefully to en-sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids
(drinks, perspiration etc.). This may cause corrosion.
The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
Please ensure that liquids or perspiration never enter the machine or the electronics.
ASSEMBLY INSTRUCTIONS
Instructions for Assembly
Ensure that you have received all the parts required (see checklist) and that they are undamaged. Should you have any cause for complaint, please contact KETTLER.
Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams.
Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
The equipment must be assembled with due care by an adult person.
The fastening material required for each assembly step is shown in the diagram. Use the fastening material exactly as instructed.
Bolt all the parts together loosely at first, and check that they have been assembled correctly. Then check that all screw connections have been tightened firmly.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Ordering Spare Parts
When ordering spare parts, always state the full model number, position, and the quantity required.
Example order: Model # 7979-400 / position A / 1 piece Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding
the words „with fastening material“.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Waste Disposal VERSO by KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
LIMITED WARRANTY
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE MANUFACTURER ON KETTLER® PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRANTY AGAINST DEFECTS IN MATERIAL SET OUT BELOW:
This KETTLER® Limited Warranty applies to products sold through the KETTLER® Authorized Dealer Network to the original retail purchaser and authenticated by proof of purchase from a retailer located in the United States. Any shipments made under this warranty will be shipped to the United States only. Any shipment outside of the United States will be at the sole cost of the customer. This KETTLER® Limited Warranty is a manufacturer’s warranty and is not changed or modified by additional warranties extended by individual retailers at the point of sale. Manufacturer warrants this product to be free from defects in material at the time of the product’s tender of delivery for a period of 2 for residential use. This Limited Warranty is not transferable and does not cover normal wear and tear (including, but not limited to, damage and wear to tires, power shocks, drive belts and other non-durable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages resulting from the defect. This Limited Warranty is void if the product is damaged by accident, unreasonable use, improper service, failure to follow instructions provided, modification from its original state, or other causes determined not arising out of defects in material.
This warranty gives you specific legal rights. Should this product become defective due to material within the warranty period, contact KETTLER® Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at parts@kettlerusa.com
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE MANUFACTURER. KETTLER® NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH SUCH PRODUCTS.
.
CHECKLIST
I-4 Screw M5*10 (4)
R400
I-1 Allen Bolt M8x16mm
I-2 Curved washer for ? 8*?19*2T bolt(8)
I-3 Screw M5*12 (8)
Allen Key(1)
8
Screwdriver (1)
(Pedal Wrench)
Assembly Instruction
D-16
D-15
D-13
D-14
K-1
D-35
D-13
D-14
J-3
I-3
D-37
J
I-2
I-1
I-4
N-6
O
J-5
I-1 I-2
Loading...
+ 13 hidden pages