Kettler 07988-880 User Manual
Montageanleitung „ERGORACE“
Art.-Nr. 07988-880
Abb. ähnlich
deutsch
english
française
nederlands
español
italiano
polski
čeština
A 120 cm
B 53 cm
C 120 cm
56 kg
A
B
C
max.
130 kg
■ All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive appliances (e.g. mobile telephones) directly next to the cockpit or the
electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement).
■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your
program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!
■ Any interference with parts of the product that are not described
within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by
KETTLER.
■ Always observe the general safety rules and precautions for working
with electrical equipment.
■ ATTENTION! Before beginning your program of training, study
the instructions for training carefully.
■ Our products are subject to a constant innovative quality assurance.
We reserve the right to perform technical modifications.
■ In case of enquiry, please contact your KETTLER dealer.
■ In choosing the location of the apparatus, ensure a sufficient safety
distance from any obstacles. The apparatus must not be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).
■ For a comfortable training position please adjust the handlebar and-
saddle position to your body height.
■ Caution: While assembly of the product keep off children’s
reach (Choking hazard - contains small parts).
■ WARNING! Heart rate monitoring systems can be imprecise.
Excessive training may lead to serious health damage or death.
If you feel giddy or weak, please stop the training immediately.
■ ATTENTION! If you lose the pulse signal, the performance
of the device will remain constant for approx. 60 seconds and
is then slowly adjusted downwards. Please check your pulse measuring system (ear clip, hand pulse or chest belt) so that the pulse
signal of the electronics can be entered again.
!
■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
■ A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon operation.
Possibly occurring noise during reverse pedalling result from
engineering and are absolutely safe.
■ The exercise cycle has a electromagnetic brake system.
■ The equipment is independent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the machine
or the electronics.
■ Before use, always check all screws and plug-in connections as well
as respective safety devices fit correctly.
■ Always wear suitable shoes when using.
4
Assembly Instructions
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain
important information for use and maintenance of the equipment as well as for your personal safety. Keep these
instructions in a safe place for maintenance purposes or for ordering spare parts.
english
Handling the equipment
■ Before using the equipment for exercise, check carefully to ensure
that it has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp room
as this may cause it to rust. Please ensure that no part of the
machine comes in contact with liquids (drinks, perspiration etc.). This
may cause corrosion.
■ The machine is designed for use by adults and children should not
be allowed to play with it. Children at play behave unpredictably
and dangerous situations may occur for which the manufacturer
cannot be held liable. If, in spite of this, children are allowed to
use the equipment, ensure that they are instructed in its proper use
and supervised accordingly.
■ The exercise cycle complies with the DIN EN 957 - 1/- 5 class HA.
For Your Safety
■ ATTENTION! The crosstrainer should be used only for its
intended purpose, i.e. for physical exercise by adult people.
■ ATTENTION! Any other use of the equipment is prohibited
and may be dangerous. The manufacturer cannot be held liable
for damage or injury caused by improper use of the equipment.
■ Exercise has been designed in accordance with the latest standards
of safety. Any features which may have been a possible cause of
injury have been avoided or made as safe as possible.
■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.
■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out of use
until this has been done. Use only original KETTLER spare parts.
■ If the equipment is in regular use, check all its components thoroughly
every 1 -2 months. Pay particular attention to the tightness of bolts
and nuts.This applies especially to the securing bolts for saddle and
handelbars.
■ To ensure that the safety level is kept to the highest possible standard,
determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.
■ ATTENTION! Instruct people using the equipment (in parti-
cular children) on possible sources of danger during exercising.
■ The device requires a supply voltage of 230V, 50 Hz.
Connect the power cord with a grounded protective contact socket.
■ IMPORTANT! Do not under any circumstances carry out elec-
trical repairs or alterations yourself. Always ensure that such work
is done by a properly qualified electrician.
■ IMPORTANT! disconnect the apparatus from the mains before
doing repair, maintenance or cleaning work.
■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the VDE
regulations.
■ Unplug the power cord of the device from the socket if not used
for a longer period.
■ Ensure that the power cable is not pinched and that no-one can trip
over it.
!!!
!
!
!
!
!
5
danger. There is always a risk of suffocation if children play with
plastic bags!
■ The fastening material required for each assembly step is shown in
the diagram inset. Use the fastening material exactly as instructed.
The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections
have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is
destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire
B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · Virginia Beach · Virginia VA
23453 USA
http://www.kettlerusa.com
english
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list)
and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if possible technically talented.
■ Please note that there is
always
a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
■ Ensure that your working area is free of possible sources of danger,
for example don’t leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any
List of spare parts page 28-30
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: Art.no.07988-880 / spare-part no.
10100030 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material“.
■ Use for your regular cleaning, maintenance and care our appliance
maintenance set (Article no. 07921-000) specifically licensed for
KETTLER Sports apparatus and available from the Sport specialized
trade..
■ Nobody may be in the moving range of a training person during
training.
18
–GB –Measuring help for screw connections
–F – Gabarit pour système de serrage
–NL –Meethulp voor schroefmateriaal
–E – Referencia de medición para el material de atornilladura
–I – Misura per il materiale di avvitamento
– PL – Wzornik do połączeń śrubowych
–CZ –Měřící pomůcka pro materiál k přišroubování
Messhilfe für Verschraubungsmaterial
Beispiele Examples Examples Bij voorbeeld
Ejemplos Esempio Przyktady Příklad
19
Checkliste
1
1/1
2
1
1
1
1
M 6 x 20
6
6
2
1
M 8 x 60
2
M 8 x 60
M 8
M 8 x 65
1
2
4
Ø 6,4x12,5x1,6
1
Ø 21x8,25x2
Ø 8,3x16x2
1
1/1
M 8
1
1
1
Loading...