Kettler 07851-590, 07851-500 User Manual
Montageanleitung NORDIC-Trainer / ALPINE-Trainer
Art.–Nr. 07851-500 / 07851-590
Auf 100% Altpapier!
USA
I
E
NL
F
GB
Abb. ähnlich
150 kg
max.
75
kg
D
PL
CH
A
Important Instructions
GB USA
Please read these instructions carefully prior to carrying out assembly and using for the first time.
They contain information which is important for your safety as well as for the use and maintenance of the appliance. Keep these instructions in a safe place for reference purposes, maintenance
work and to assist you when ordering spare parts.
For Your Safety
■ The crosstrainer should be used only for its intended purpose,
i.e. for physical exercise by adult people.
■ Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.
■ The crosstrainer has been designed in accordance with the la-
test standards of safety. Any features which may have been a
possible cause of injury have been avoided or made as safe as
possible.
■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the
user.
■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
■ If the equipment is in regular use, check all its components
3
Handling the equipment
■ Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
■ The crosstrainer complies with the DIN EN 957 -1/-9, class HB.
It is therefore unsuitable for therapeutic use.
■ A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe.
■ Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
■ The crosstrainer has a magnetic brake system.
■ To operate correctly, the pulse function requires a minimum vol-
tage of 2,7 volts (only for computers working with batteries).
■ The equipment is dependent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■ Always wear suitable shoes when using.
■ All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
■ Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
■ The fastening material required for each assembly step is
shown in the diagram inset. Use the fastening material exactly
as instructed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
List of spare parts page 25-27
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07851-500 / spare-part no. 33003005
thoroughly every 1 -2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the attachment of grip strap, running plate and fastening of the
handlebar and front tube.
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.
■ Instruct people using the equipment (in particular children) on
possible sources of danger during exercising.
■ Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■ Any interference with parts of the product that are not descri-
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained
by KETTLER.
■ In case of enquiry, please contact your KETTLER dealer.
■ In choosing the location of the apparatus, ensure a sufficient sa-
fety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (paths,
doorways, corridors).
Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts).
!
4
GB USA
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · VA 23450 Virginia Beach
USA
http://www.kettlerusa.com
USA
GB
GB USA
Checkliste (Packungsinhalt)
Checklist (contents of packaging) Liste de vérification (contenu de l’emballage) Checklijst (verpakkingsinhoud)
Lista de control (contenido del paquete) Lista di controllo (contenuto del pacco) Lista kontrolna (zawartość opakowania)
I
E
NLFGB
1
1
1
1
1
1
1
1
1
1
1
14
PL
1
2/2
2
2
1
1
1
1
1
2/2
1/1
Checkliste (Packungsinhalt)
SW 10/13 1x SW 17 2x SW 15 1x
Checkliste (Packungsinhalt) Actual Size
15
4/2/2
S-19/1200
1
M8x45
M10x20
M5
2
ø31,5x16,3
6
2
2
ø25x8,4x3
2
2
ø18x11,3x2
4
2
M10x105
M5x90
ø10x2,4x52
ø22,2x2x16
1
1
M10
2
ø16x8,3x2
8
ø15,5x5,4x1,5
2
M8x16
4x35
3,9x19
M10x1,25
2
2
8
M5x12
4
ø10
6
3,9x13
4
2
Loading...