KERN & SOHN TVP-L User Manual

Sauter GmbH

Ziegelei 1

sauter

TVP

D-72336 Balingen
E-Mail: info@

.eu

Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Instruction Manual

Thank you for buying a SAUTER test stand. W e hope you
are pleased with your high quality test stand with its big
functional range. If you have any queries, wishes or helpful
suggestions, do not hesitate to call our service number.

1. Included in delivery

- SAUTER TVP

- Various hooks

2. Warning

Intended use
The instrument you have acquired serves to determine the
measuring value of the material to be measured. It is
intended to be used as a “non-automatic“ instrument, i.e.
the material to be measured is manually and carefully
attached at the instrument. The measuring value can be
read off after a stable measuring value has been obtained.

Be careful about the limit load of test stand and force
gauge. Do not go over the maximum force.

3. Technical Specifications

Capacity: up to 500 Newton

Unit net weight: 10,5 kg

Minimum height above base plate: 115 mm

Maximum height above base plate: 318 mm

Height : 420 mm / Length: 233 mm /depth : 150 mm

Dimensions of the base plate:

^

4. Fixture of the measuring instruments

By means of 4 M3 screws

TVP-BA-e-1311 1

Sauter GmbH

sauter

TVP

5. Drawing

Dimension in Millimeters (mm)

Ziegelei 1
D-72336 Balingen
E-Mail: info@

.eu

Instruction Manual

Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

TVP-BA-e-1311 2