KERN & SOHN TEE 150-1 User Manual

KERN & Sohn GmbH
Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com
KERN TEE
Version 1.0 11/2006 GB
Tel: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com
TEE-BA-e-0610
GB
KERN TEE
Version 1.0 11/2006
Operating instruction Pocket balance
1. Technical Data
Weighing range (Max): 150 g
Readout (d): 0.1 g
operating conditions: 18 – 25 °C
power supply: 2 x 1,5V „AAA“
2. Operation
Press the “ON” – key, the balance displays “8.8.8.8” and switches to “0.0 g”.
Place the weighing object in the middle of the weighing platform; the weight in grams is shown
on the display.
max. 85% air humidity (not condensing)
By pressing “ZERO” the balance can be reset to “0.0 g”.
Weighing unit switch-over: from g to OZ (button under balance)
3. Package Volume
Pocket Balance
Balance cover
Batteries (2 x 1,5V „AAA“)
Operating instructions
4. Adjustment
By pressing “CAL” for 3 seconds until “CAL” appears on the display.
Let loose the “CAL”-key; the display shows “100”.
Place recommended adjusting weight (100 g, class M3, not included).
Information concerning the adjusting weights is available at:
The display switches to “F” and the adjustment is complete.
If other messages are on the display, the adjustment was faulty.
Please repeat the adjustment process.
http://www.kern-sohn.com
5. Important Notes
Do not overload the balance (when overloaded, error message “E” appears)
With the occurrence of electromagnetic fields deviations of the displayed weight value are
possible. In case of deviations change location.
Avoid high air humidity, vapours and dust, because the balance is not hermetically closed. Do not bring the balance in direct contact with liquids. Liquids could enter the load cell.
No permanent load on the weighing platform.
Never operate the balance in rooms where danger of explosion exists.
Regularly check the balance with the test weight.
Warranty expires as soon as the balance is opened.
Loading...