KERN & SOHN TCB 200-1 User Manual

KERN & Sohn GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]

Operating instruction
Pocket balance

KERN TCB

Version 1.2
03/2003
GB

Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

TCB-BA-e-0312

GB

KERN TCB

Version 1.2 03/2003

Operating instruction
Pocket balance

1. Technical Data

• Weighing range: 200 g

• readability d: 0.1 g

• operating conditions: 10 – 30 °C

• power supply: batteries 2 x LR44

2. Operation

• Turn the cover-disk to position „AUF/OPEN “

• Press the ON/OFF key

max. 85% air humidity (not condensing)

; the balance displays “8888” and switches to “0”.

• Place the weighing object in the middle of the weighing platform; the weight in
grams is shown on the display.

• By pressing

• After the weighing process is finished the cover-disk should be turned back to

“ZU/CLOSE”.

1. Adjustment

• By pressing

• Let loose the ON/OFF-key; the display shows “100”.

• Place a 100 g adjusting weight (class M3) on the weighing platform.

• The display switches to “F” and the adjustment is complete.

• If other messages are on the display, the adjustment was faulty. Please repeat

the adjustment process.

2. Important Notes

• Do not overload the balance (when overloaded, error message “E” appears)

• With the occurrence of electromagnetic fields deviations of the displayed

weight value are possible. In case of deviations change location.

• Avoid high air humidity, vapours and dust, because the balance is not
hermetically closed. Do not bring the balance in direct contact with liquids.
Liquids could enter the load cell.

• No permanent load on the weighing platform.

• Never operate the balance in rooms where danger of explosion exists.

• Regularly check the balance with the test weight.

• Warranty expires as soon as the balance is opened.

the balance can be reset to “0”.

for 3 seconds until “CAL” appears on the display.