KERN & SOHN AFH FD User Manual
Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: info@sauter.eu
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
Instruction Manual
AFH – Fast / FD
1. Software Installation
a. Preparation
Please make sure, your system is updated with “.NET Framework 2.0).
This can be downloaded under:
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDDAAB15C5E04F5&displaylang=en
b. System Start
Please select folder “New Version”
Please Open: AFH English or German
Please run the software
AFH/FD-BA-e-1110 1
Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: info@sauter.eu
Instruction Manual
AFH – Fast / FD
2. AFH-FD Hardware Installation (AFH-FD only)
2.
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
3. 4.
1.
1. Force Measurement Unit: SAUTER FH series
2. Length (Displacement) Measurement Unit Included in AFH-FD
3. Junction Box Included in AFH-FD
4. PC (not included)
AFH/FD-BA-e-1110 2
Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: info@sauter.eu
Instruction Manual
AFH – Fast / FD
st
1
Step:
Make sure that Length Measurement Device
and Force Gauge are both turned OFF
!!
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
nd
2
Step:
Connect
Length Measurement Device and Force
Gauge to Juncion Box by RS 232C Cable
(included) and individual RS 232C Cable
(included). Do not yet turn on the devices!
AFH/FD-BA-e-1110 3
Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: info@sauter.eu
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
Instruction Manual
AFH – Fast / FD
rd
Step:
3
Connect
(included; 230V) to Junction Box. Doesn´t matter whether the
Computer is turned on or off.
th
5
Now first turn on
The software can be used now and force signal can be combined with length signal.
computer by standard RS 232 C and power plug cable
th
4
Step:
Insert Power Plug
on the back side of the Junction box is on.
Step:
a) the Length Measurement Device
and after that
b) the Force Gauge.
and make sure that the green Light
AFH/FD-BA-e-1110 4
Loading...