KERN HCB User Manual

HCB

Industrial Balance

Standard

Adjusting program (CAL):

for quick setting of the
balance’s accuracy. External
adjusting weight required.

Tare: put back displayed

value to ”0“ during weighing
process, e.g. to add or remove
weighing material from a container.

ZEP_EP_HCB_GB_051

KERN – Your DKD

Calibration Partner

issues DKD calibration

certificates for

balances and test

weights in its own
accreditated laboratories.
It is internationally valid.

DKD = German

Calibration

Service

Your specialist dealer

GB

Telefon 00 49-[0 ] 74 33-99 33 - 0
Telefax 00 49-[0 ] 74 33-99 33 - 146
e-mail: [e-mail]
Internet: www.kern-sohn.com

KERN & SOHN GMBH

Postfach 40 52
D-72336 Balingen

KERN is manufacturer of test
weights in the international
classes of accuracy E1,
E2, F1, F2, M1, M2, M3,
from 1 mg up to 2000 kg

HCB

Technical Data

Measurement data HCB 20K50 HCB 50K100 HCB 100K200 HCB 200K500

Reproducibility 50g 100g 200g 500g
Linearity +/-100g +/-200g +/-400g +/-1000g
Stabilisation time (s) 2222
Sensity drift (°C) 10*10^-6 10*10^-6 10*10^-6 10*10^-6

Verifcation data

Verification class ---­Verification value ---­Minimum load ---­Verification in the factory possible ----

Ambient conditions

Permissible temperature +10... +30°C +10... +30°C +10... +30°C +10... +30°C
Permissible humidity max. 80% max. 80% max. 80% max. 80%

(not condensating) (not condensating) (not condensating) (not condensating)

Piece counting

Minimum weight ---­Reference quantity ----

Basic equipment

Protective working cover ---­Accumulator ---­Battery-supply 3 x 1,5V, size AA, 3 x 1,5V, size AA, 3 x 1,5V, size AA, 3 x 1,5V, size AA,

300h operation time 300h operation time 300h operation time 300h operation time

Auto-Off After 3min After 3min After 3min After 3min
Stand-by ---­Mains adapter Battery Battery Battery Battery
Filter steps ---­Type of balance display LCD LCD LCD LCD
Digit height of balance display 12mm 12mm 12mm 12mm
Levelling feet, level indicator ---­Weighing units kg kg kg kg
Freely programmable weighing units ---­Internal adjusting weight ---­External test weight, included ---­Recommended adjusting weight 10kg (M3) 20kg (M3) 50kg (M3) 50kg (M3)
Explosion protection ----

Dimensions / materials / weights

Dim. of weighing plate (WxDxH / Ø, mm) ---­Dimensions of terminal (WxDxH, mm) ---­Dimensions of casing (WxDxH, mm) 150x80x45 150x80x45 150x80x45 150x80x45

(without hook) (without hook) (without hook) (without hook)

Material of casing Plastic Plastic Plastic Plastic
Dim. of draught guard (WxDxH / ØxH, mm)

----

Material of draught guard ---­Dimensions of packaging (WxDxH, mm) 200x120x70 200x120x70 200x120x70 200x120x70
Gross weight (kg) 1111
Net weight (kg) 0,4 0,4 0,4 0,4

! Our balances are not suitable for use in areas of high humidity or where there is a danger of

explosion for models with protection class < IP 65.

! All relevant electrical regulations must be observed.

Important notes: