
KWX Series
Wireless Transceivers
• Provides wireless RS-485 networking of PXL-500 Tiger II Controllers
• Allows networking of controllers in applications where cabling is difficult or impossible
• 915 MHz and 2.4 GHz models for worldwide compliance, no site license required
• Range up to 300’ (91m) with 915 MHz, up to 180’ (55m) with 2.4 GHz
• Range can be extended with optional antennas
• Can be used in conjunction with cabled controllers in the same network (mix and match)
• Built in signal strength indicators
Keri’s KWX Series Wireless Transceivers provide maximum flexibility and ease of installation in access
controller network architecture. Designed for any installation where Keri PXL-500 Tiger II Controllers will
be distributed around the facility or in clusters, these wireless transceivers can transmit RS-485 data
between controllers at up to 300’ (91m), or even longer with one of several optional antennas.
Whether it is to avoid costly trenching across a parking lot to reach other buildings or gates, to avoid a
long cable run within a building, or simply to manage all access control points within a single site in
the Doors software, wireless data transmission provides the solution.
Cabled and wireless and controllers can both be installed together in single controller network (mix
and match), allowing the customer to choose which connection method best suits each controller
location. Because transceivers can be placed up to 100’ (30m) from the controller, wireless transmission
range between controllers can be optimized by proper positioning of the transceivers to avoid
interference from building materials such as heating and air conditioning ducts, extending the
transmit/receive distance up to 500’ (150m) for 915 MHz systems and 380’ (115m) for 2.4 GHZ
systems, under ideal, line-of-sight conditions. Several antenna options can also increase distance or help
penetrate extra thick building materials or other objects. To avoid interference between two or more
distinct Keri access systems that would be located within the operating range of the transceivers,
adjacent customers can each use separate frequencies, 915 MHz vs. 2.45 GHz.
2305 Bering Drive, Ste A
San Jose, CA 95131 U.S.A.
(800) 260-5265 • (408) 435-8400 • Fax (408) 577-1792
e-mail: sales@kerisys.com web: www.kerisys.com
DATA SHEET
Wireless Transceivers
KWX Series

Wireless Transceivers
Specifications
Size
5.2”H x 3.8”W x 1.0”T
(132.1mm x 96.5mm x 25.4mm)
Weight (Including Cable)
10.4 oz, (295 g)
Power Requirements
+12 VDC @ 150mA
(supplied through controller)
Operating Environment
32°F to 140°F (0°C to 60°C)
10%-90% Humidity (non-condensing)
Communication
RS-485, 9600 Baud
Frequency
915 KHz (902 MHz to 928 MHz), or
2.4GHz (2.4GHz (2.4000GHz – 2.4835GHz)
Transmit/Receive Range
(no external antenna)
915 MHz: (up to 300’ (91m)
2.4GHz: (up to 180’ (55m)
See model # table lower right for additional range
provided by antenna options
Material
Polycarbonate
Color
Black
Modulation
FHSS Direct FM
(Frequency Hopping Spread Spectrum)
Antenna
Z\v Wave Dipole
RPSMA Connector
Specifications subject to change without notice.
Notes
• Transmit/Receive ranges variable, depending upon
antenna configuration, building materials and
other environmental factors
• For co-located systems alternately use 915 MHz
and 2.4 GHz transceivers
• Contact factory for outdoor mounting instructions
KWX Series
Models
KWX-9A 915 MHz, Channel A RS-485 Transceiver
KWX-24 2.4 GHz RS-485 Transceiver
ANT-91 915 MHz Remote Wiring Antenna (separates antenna from
transceiver for better line-of-site)
ANT-94 915 MHz Omni-Directional Extended Range Antenna
ANT-9Y 915 MHZ Uni-Directional Extended Range Antenna (Yagi)
ANT-241 2.4 GHz Remote Wiring Antenna (separates antenna from
transceiver for better line-of-site)
ANT-244 2.4 GHz Omni-Directional Extended Range Antenna
ANT24Y 2.4 GHz Uni-Directional Extended Range Antenna (Yagi)
P/N 01756-001
Keri Systems Main Office
2305 Bering Drive, Ste A
San Jose, CA 95131 U.S.A.
Toll Free (800) 260-5265
Tel (408) 435-8400
Fax (408) 577-1792
sales@kerisys.com
www.kerisys.com
Keri Systems Latin America
8175 NW 12th Street – 130
Miami, Florida 33126 U.S.A.
Tel (786) 331-8775
Fax (786) 331-7410
kerila@bellsouth.com
Keri Systems, UK Ltd.
Unit 17
Park Farm Industrial Estate
Ermine Road, Buntingford
Hertfordshire UK SG9 9AZ
Tel 44 (0) 8704 447234
Fax 44 (0) 1763274106
sales@kerisystems.co.uk
www.kerisystems.co.uk
Keri Systems Australia
Unit 1 / 5A Pioneer Avenue
Tuggerah NSW 2259
Australia
Tel 612 4353 0466
Fax 612 4353 0477
dmarks@keri.com.au
www.keri.com.au