Keri Systems B100-SKP-SA Specsheet

B100-SKP-SATM

Stand-Alone, Swipe-Fingerprint Reader w/Keypad

• High quality swipe- ngerprint reader in small, sleek, and attractive package

• Stores up to 100  ngerprint templates

• (98 + 2 admin), 98 codes

• Multi-color LED bar to indicate access status

• Integrated relay (1 relay)

• Remote relay units available

• Programmable via  ngerprint or keypad

B100-SKP-SA

Swipe-Fingerprint + PIN

Keri’s B100-SKP-SATM Readers provide reliable swipe-  ngerprint reading in attractive and unobtrusive packages. Typically for small and medium installations, these readers can be used in residential areas, homes, o ces, gate automations and other applications where high security is needed but simple installation is required.

B100-SKP-SA Readers have one integrated relay so you can connect the readers directly to activate devices such as

electric locking, alarm systems, etc. For higher security and additional relay needed, the readers could be linked via RS485 to our RU2 din-rail two-remote relays unit in a secured area. The readers can be programmed in a few steps via the  ngerprint sensor via the keypad, running through a simple programming menu provided.

2305 Bering Drive  San Jose, California 95131 408-435-8400  Toll Free: 800-260-5265  Fax: 408-577-1792

B100-SKP-SATM Stand-Alone, Swipe-Fingerprint Reader w/Keypad

DATA SHEET, Page 2 of 2

Speci cations:

Sizes:

3.9” x 3.7” x 1.2” (100mm x 95mm x 30mm)

Weight:

1.1lb (.491 kg)

Material:

Molded Aluminum

Color:

Silver

Output:

1 integrated relay (2A /24V AC/DC)

Connection Method:

1 integrated relay or RS485 if connected

to RTT (1 relay 2A /24V AC/DC) and if connected to RU2 (2 relays 3A/230V AC; 3A/24V AC/DC)

Programming:

Via  nger templates and/or via keypad

with menu provided – depending on models

Capacity:

100  ngerprints

(98 + 2 admin) / 98 codes

Sensor Type:

Capacitive swipe

1:1000 Read Time:

970 msec

Supported Card Technologies:

Keri NXT and HID 125 KHz, MIFARE Classic/Plus/Ultralight,

DESFire EM or AWID available upon request

Power Requirements:

+9-14VDC @ 120mA

Indicators:

Red Green Amber LED, beeper and small

programming LED

IP Rating:

IP-65 (outdoor use with required covers)

Operating Temperature:

5oF to 122oF (-15oC to + 50oC)

Speci cations are subject to change without notice.

3.9” (100mm)

3.7” (95mm)

1.2” (30mm)

ORDERING INFORMATION:

Model # Description

B100-SKP-SA 100 Template, Stand-Alone, Swipe-Fingerprint Reader + Keypad

Keri Systems B100-SKP-SA Specsheet

Specifications and Main Features

Frequently Asked Questions

User Manual