Keri Systems B100-S, B100-SKP, B100-SPX, B100-SSC Specsheet
B100 SeriesTM
Swipe-Fingerprint Readers
• High quality swipe- ngerprint readers in
small, sleek, and attractive packages
• Available in swipe: ngerprint-only,
ngerprint + card, and ngerprint + PIN
• Card reader models available with
Keri NXT + HID 125 KHz Proximity
or MIFARE/DESFire capabilities
• Stores up to 100 ngerprint templates
• Multi-color LED bar to indicate access status
• Compatible with Keri’s NXT Controllers and
PXL-500W Tiger Controller
• Industry standard Wiegand
output for compatibility
with most 3rd party
access control systems
B100-S
Swipe-Fingerprint Only
B100-SKP
Swipe-Fingerprint + PIN
B100-SPX Swipe-Fingerprint + Proximity
B100-SSC Swipe-Fingerprint + Mifare
Keri’s B100TM Series Readers provide reliable swipe- ngerprint reading in attractive and unobtrusive packages. Readers
are available in ngerprint-only, ngerprint + card, and ngerprint + keypad versions. Typically used in higher security
applications, they can be used either for primary user identi cation ( ngerprint-only) or for secondary veri cation
based on initial use of a card or PIN.
B100 Series Readers are compatible with Keri’s NXT controllers with an NXT-WI Wiegand Interface, PXL-500W Tiger
Controller, and 3rd party controllers that accept Wiegand-type readers. The readers contain an internal beeper and an
LED bar to indicate ngerprint accepted and access granted/denied status for user feedback. Keypad and card models
may be used outdoors with appropriate covers. Fingerprint template sharing between readers is done using RS-485
networking, with an option for TCP/IP. Keri’s BioManager software is used for enrollment and template management.
2305 Bering Drive San Jose, California 95131
408-435-8400 Toll Free: 800-260-5265 Fax: 408-577-1792
B100 SeriesTM Swipe-Fingerprint Readers
DATA SHEET, Page 2 of 2
Speci cations:
Sizes:
B100-S
2.0” x 3.6” x 1”
(51mm x 92mm x 25mm)
B100-SPX, B100-SSC, B100-SKP
3.9” x 3.7” x 1.2”
(100mm x 95mm x 30mm)
Weight:
B100-S: 12oz (.332 kg)
B100-SKP: 1.1lb (.491 kg)
B100-SPX: 1.1lb (.491 kg)
B100-SSC: 1.1lb (.491 kg)
Material:
B100-S: Molded Aluminum
B100-SKP: Molded Aluminum
B100-SPX and B100-SSC:
ABS Plastic
Color:
Silver
Output:
Wiegand (8-128 bits, 26 default),
3’ (1m) cable supplied
Connection Method:
TCP/IP to rst unit,
RS-485 to subsequent units
(TCP/IP optional)
Programming:
Keri BioManager Software
Capacity:
100 ngerprints
(98 + 2 admin) / 98 codes
Sensor Type:
Capacitive swipe
1:1000 Read Time:
970 msec
Supported Card Technologies:
Keri NXT and HID 125 KHz,
MIFARE Classic/Plus/Ultralight,
DESFire EM or AWID available
upon request
Power Requirements:
B100-S: +9-14VDC @ 100mA
B100-SKP: +9-14VDC @ 120mA
B100-SPX: +9-14VDC @ 200mA
B100-SSC: +9-14VDC @ 130mA
Indicators:
Red Green Amber LED, beeper and
small programming LED
IP Rating:
IP-65 (outdoor use with
required covers)
Operating Temperature:
5oF to 122oF (-15oC to + 50oC)
Speci cations are subject to change
without notice.
ORDERING INFORMATION:
Model # Description
B100-S Swipe-Fingerprint -Only Reader,
indoor
B100-SKP Swipe-Fingerprint Reader +
Keypad
B100-SPX Swipe-Fingerprint + Proximity
Reader, (Keri NXT + HID 125 KHz)
B100-SSC Swipe-Fingerprint + MIFARE
Reader, (Classic/Plus, Ultralight,
DESFire)
RELATED PRODUCTS:
Model # Description
B100-SKP-SA 100 Template, Stand-Alone, Swipe-
Fingerprint Reader + Keypad
KBF-MINI Cover for single reader
KBF-CVR Cover for double reader
KBF-SGP North American Single Gang
Mounting Plate
KBF-DGP North American Double Gang
Mounting Plate
KBF-CNV RS-485 to TCP/IP Converter
KBF-ENR Fingerprint Enrollment Station
DNET-BIO BioManager Software for
ngerprint management
Presented By:
PN: 01683-001 Rev.B
Loading...