KEPCO Kit 219-0442 User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

KIT

219-0442

CHASSIS SLIDES KIT NO. 219-0442

1. DESCRIPTION

This Kepco KIT contains the components required to install chassis slides on Kepco RA 58 or RA 60 Rack Adapters to
accomodate 22- to 26-inch deep cabinets.

2. INSTALLATION OF CHASSIS SLIDES

2.1 MATERIAL REQUIRED (SEE TABLE 1.)

TABLE 1. MATERIAL REQUIRED

MATERIAL LOCATION QUANTITY

Slide (includes cabinet and chassis sections), Kepco P/N 108-0318 (Jonathan P/N
110QD-18-1)

End Bracket, Kepco P/N 128-1849 (Jonathan P/N SPO-440-Z) Provided in this Kit 2

End Bracket, Extended, Kepco P/N 128-1699 (Jonathan P/N 204161 RETMA) Provided in this kit 2

Screw 10-32 x 3/8 in. long, BHPH, cadmium/yellow plated Kepco P/N 101-0311 Provided in this Kit 16

Provided in this Kit 2

Nut, 10-32 Kepco P/N 102-0008 Provided in this Kit 8

Washer, flat #10 Kepco P/N 103-0031 Provided in this Kit 8

Washer, Internal lock, #10, Kepco P/N 103-0019 Provided in this Kit 8

2.2 PROCEDURE (SEE FIGURES 1, 2 AND 3.)

1. Attach two chassis sections of slide (108-0318) to each side of rack adapter using eight screws (101-0311)
(see Figure 1).

( 1 ) 108-0318 JONATHAN SLIDE 110-18-QD-1
SLIDE CHASSIS SECTION ONLY

FIGURE 1. INSTALLING CHASSIS SLIDES ON RACK ADAPTER

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] "

http://www.kepcopower.com " email: [e-mail]

©2003, KEPCO, INC
Data subject to change without notice 228-1471

FAX [phone]

1

2. Attach two end brackets (128-1849) and two extended end brackets (108-1699) to the two cabinet sec­tions of slides (108-0318) using eight screws (101-0311), flat washers (103-0031), lockwashers (103-

0019), and nuts (102-0008) (see Figure 2).

FIGURE 2. ATTACHING END BRACKETS TO SLIDE (CABINET SECTION)

3. Attach mounting brackets (with cabinet section of slide attached) to the cabinet rail (attaching hardware
not supplied) (see Figure 3).

FIGURE 3. ATTACHING CABINET SECTION TO RAIL

4. Insert rack adapter into rack (insert chassis-mounted slide section into the cabinet mounted slide sec­tion).

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] "

2

http://www.kepcopower.com " email: [e-mail]

228-1471 032403

FAX [phone]