
INSTRUCTION MANUAL
KEPCO
An ISO 9001 Company.
KIT
219-0433
CHASSIS SLIDES KIT NO. 219-0433
1. DESCRIPTION
This Kepco KIT contains the components required to install chassis slides on Kepco RA 58 or RA 60 Rack Adapters
2. INSTALLATION OF CHASSIS SLIDES
2.1 MATERIAL REQUIRED (SEE TABLE 1.)
TABLE 1. MATERIAL REQUIRED
MATERIAL LOCATION QUANTITY
Slide (includes cabinet and chassis sections), Kepco P/N 108-0318
(Jonathan P/N 110QD-18-1)
End Bracket, Kepco P/N 128-1849 (Jonathan P/N SPO-440-Z) Provided in this Kit 4
Screw 10-32 x 3/8 in. long, BHPH, cadmium/yellow plated Kepco P/N
101-0311
Provided in this Kit 2
Provided in this Kit 16
Nut, 10-32 Kepco P/N 102-0008 Provided in this Kit 8
Washer, flat #10 Kepco P/N 103-0031 Provided in this Kit 8
Washer, Internal lock, #10, Kepco P/N 103-0019 Provided in this Kit 8
2.2 PROCEDURE (SEE FIGURES 1, 2 AND 3.)
1. Attach two chassis sections of slide (108-0318) to each side of rack adapter using eight screws (101-0311) (see
Figure 1).
( 1 ) 108-0318 JONATHAN SLIDE 110-18-QD-1
SLIDE CHASSIS SECTION ONLY
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 "
©2003, KEPCO, INC
Data subject to change without notice
FIGURE 1. INSTALLING CHASSIS SLIDES ON RACK ADAPTER
http://www.kepcopower.com " email: hq@kepcopower.com
228-1467 REV 1
FAX (718) 767-1102
1

2. Attach four end brackets (128-1849) to the two cabinet sections of slides (108-0318) using eight screws
(101-0311), flat washers (103-0031), lockwashers (103-0019), and nuts (102-0008) (see Figure 2.
FIGURE 2. ATTACHING END BRACKETS TO SLIDE (CABINET SECTION)
3. Attach mounting brackets (with cabinet section of slide attached) to the cabinet rail (attaching hardware
not supplied) (see Figure 3).
FIGURE 3. ATTACHING CABINET SECTION TO RAIL
4. Insert rack adapter into rack (insert chassis-mounted slide section into the cabinet mounted slide section).
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 "
2
http://www.kepcopower.com " email: hq@kepcopower.com
228-1467 REV 1 032103
FAX (718) 767-1102