KEPCO CA 44-R User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

CA 44-R

ENCLOSURES AND

HARDWARE SYSTEMS

DESCRIPTION. The Kepco Model CA 44-R RoHS-compliant Cover (see Figure 1) is supplied for use with Kepco

Series RTW 150 Watt power supplies. Installing this cover changes the model suffix from K to KC. The cover
includes three M3 X 6mm screws (Kepco P/N 101-0433) used to attach the cover to the power supply as shown in
Figure 1. These screws must not be overtightened (max. torque 10 in.- lbs (1.1 N x m).

NOTE: RTW 150W power supplies with this cover installed do not have agency approvals.

REMOVE EXISTING SCREW (M3 x 8) FROM
RTW POWER SUPPLY AND USE TO SECURE
COVER TO POWER SUPPLY.
MAX TORQUE 10 1N.-LBS (1.1N x m)

COVER

CA 44-R COVER

3043458

POSITION COVER
FLANGE OVER
CHASSIS EDGE.

CHASSIS EDGE

POSITION COVER TAB
OVER CHASSIS TAB.

CHASSIS TAB

SCREW (3), P/N 101-0433
M3 X 6MM FLP2

FIGURE 1. CA 44-R COVER INSTALLATION

KEPCO, INC.  131-38 SANFORD AVENUE  FLUSHING, NY. 11355 U.S.A.  TEL [phone]  FAX [phone]

http://www.kepcopower.com  email: [e-mail]

©2010, KEPCO, INC 1
Data subject to change without notice 228-1688