KEPCO CA 34-R User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

CA 34-R

COVER

ENCLOSURES AND

HARDWARE SYSTEMS

DESCRIPTION. The Kepco Model CA 34-R RoHS-compliant Cover (see Figure 1) is supplied for use with Kepco

Series RKW 50 Watt power supplies. The cover is installed by first removing one screw (M3 X 8) from the RKW power
supply (see Figure 1). Then slide the cover onto the power supply, matching the tabs as shown in Detail A, and secure
with screw previously removed. This screw must not be overtightened (max. torque 10 in.- lbs (1.1 N x m). See Figure
2 for outline dimensions.

REMOVE EXISTING SCREW (M3 x 8) FROM
RKW POWER SUPPLY AND USE TO SECURE

COVER TO POWER SUPPLY.

MAX TORQUE 10 1N.-LBS (1.1N x m)

CA 34 COVER

3042541

COVER TAB
SEE DETAIL A

RKW TAB

SEE DETAIL A

RKW TAB

COVER TAB

DETAIL A

RKW 50W POWER SUPPLY

FIGURE 1. CA 34-R COVER INSTALLATION

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

http://www.kepcopower.com " email: [e-mail]

©2007, KEPCO, INC 1
Data subject to change without notice 228-1626

FIGURE 2. CA 34-R OUTLINE DRAWING