KEPCO CA 34 User Manual

INSTRUCTION MANUAL

KEPCO

An ISO 9001 Company.

CA 34

COVER

ENCLOSURES AND
HARDWARE SYSTEMS

DESCRIPTION. The Kepco Model CA 34 Cover (see Figure 1) is supplied for use with Kepco Series RKW 50 Watt
power supplies. The cover is installed by first removing one screw (M3 X 8) from the RKW power supply (see Figure 1).
Then slide the cover onto the power supply, matching the tabs as shown in Detail A, and secure with screw previously
removed. This screw must not be overtightened (max. torque 10 in.- lbs (1.1 N x m). See Figure 2 for outline dimen­sions.

REMOVE EXISTING SCREW (M3 x 8) FROM
RKW POWER SUPPLY AND USE TO SECURE

COVER TO POWER SUPPLY.

MAX TORQUE 10 1N.-LBS (1.1N x m)

CA 34 COVER

3042541

COVER TAB
SEE DETAIL A

RKW TAB

SEE DETAIL A

RKW TAB

COVER TAB

DETAIL A

RKW 50W POWER SUPPLY

FIGURE 1. CA 34 COVER INSTALLATION

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

http://www.kepcopower.com " email: [e-mail]

©2005, KEPCO, INC 1
Data subject to change without notice 228-1451 REV 1

FIGURE 2. CA 34 OUTLINE DRAWING