Kenwood TTM020A Series Instruction Manual
●
In order to achieve uniform
rowning we recommend you wait
b
a minimum of 30 seconds
between each toasting so that the
control can automatically reset.
Alternatively select a lower setting
when additional toasting is carried
out.
warming rack safety
1 Never set the browning control
higher than 3 when using the
warming rack.
2 Never completely cover the
warming rack.
3 When using the warming rack,
never wrap the food up. Plastic
wrapping will melt and could catch
fire. Foil will reflect heat, damaging
the toaster.
4 If you’re using the toaster slots,
always remove the warming rack
so it can’t burn you.
5 Always allow the warming rack to
cool before removing from the
toaster. Never place a hot warming
rack on a work surface.
6 Never touch hot surfaces,
especially the metal areas of the
warming rack.
to use the warming
rack
1 Place the warming rack on top of
toaster .
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no
higher than 3 ().
4 Lower the lever.
5 At the completion of the warming
cycle the toaster will switch off
automatically. Turn the items over
and repeat the operation. Watch to
make sure they don’t burn.
6 To remove the warming rack, allow
the toaster to cool and unplug.
7 Lift off the warming rack.
hints for the warming
rack
●
The warming rack can also be
used as a toast rack, but ensure it
is cool before removing from the
toaster.
care and cleaning
1 Before cleaning, unplug your
toaster and let it cool down.
2 Slide out the crumb tray . Clean,
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster
and the warming rack with a damp
cloth, then dry. Do not use
abrasives.
service & customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your toaster or
●
servicing or repairs (in or out of
guarantee)
콯 call Kenwood customer care on
023 9239 2333. Have your
model number ready - it's on
the underside of your toaster.
●
spares and attachments
콯 call 0870 2413653.
other countries
●
Contact the shop where you
bought your toaster.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
guarantee (UK only)
f your toaster goes wrong within
I
one year from the date you bought
it, we will repair or replace it free of
charge provided:
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
TTM020A series
19591/1
햸
햲
햳
햴
햵
햶
햷
Use the carriage lever to lift the
toast to Peek & View™ at any
time without cancelling the toasting
cycle.
before using your Kenwood
appliance
●
Read these instructions carefully
and retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Burnt food can catch fire, so:
●●
never leave your toaster on
unattended;
●●
keep your toaster away from
anything (eg curtains) that could
catch fire;
●●
set the browning control lower for
thin or dry bread;
●●
never warm food with a topping or
filling (eg pizza): if it drips into the
toaster, it could catch fire.
●●
Clean the crumb tray regularly:
crumbs can smoke or burn.
●
To avoid electric shocks, never:
●●
let the toaster, cord or plug get wet;
or
●●
put your hand or anything metal,
eg a knife or foil, into the toaster.
●
Always unplug the toaster when not
in use, before cleaning or
attempting to clear jammed bread.
●
Never cover your toaster with a
plate or anything else - it could
overheat and catch fire.
●
Never let the cord hang down
where a child could grab it.
●
We recommend that you do not
use your toaster directly under wall
cupboards.
●
Do not move the toaster whilst it is
in operation.
●
Never touch hot surfaces especially
the metal top area.
●
Never use an unauthorised
ttachment or accessory.
a
●
Never use a damaged toaster. Get it
checked or repaired: see 'Service &
Customer Care'.
●
This appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your toaster.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
Important – UK only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
●
The appliance must be protected
by a 13A approved (BS1362) fuse.
●
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
●
or non-rewireable plugs the fuse
F
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
before using for the first time
1 Clip excess cord into the cord
storage clips in the base .
●
Operate the toaster once on a
medium setting without bread. (The
lever will not stay down unless the
toaster is plugged in).
●
As with all new heating elements,
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and not
a cause for concern.
key
햲 removable warming rack/toast
rack
햳 warming rack handle
햴 Peek & View™ carriage lever
햵 browning control
햶 cancel button with indicator light
햷 crumb tray
햸 cord storage
to use your toaster
Plug the toaster into the power
1
upply.
s
2 Move the browning control to the
desired setting. Use a low setting
for light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels
etc.
4 Lower the lever until it locks . The
‘cancel’ button will illuminate. (The
lever will not stay down unless the
toaster is plugged in).
●
To toast frozen bread, move the
browning control to the defrost
position .
●
Use the carriage lever to lift the
toast to Peek & View™ at any
time without cancelling the toasting
cycle.
●
To stop toasting during the cycle,
press the ‘cancel’ button, the toast
will pop up and the ‘cancel’ button
light will go off.
5 Your toast will pop up
automatically, to raise it higher, lift
the lever.
hints on using your
toaster
●
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
●
When toasting a single slice of
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
●
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
●
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
Loading...