●
As with all new heating elements,
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and
not a cause for concern.
key
removable warming rack/toast
rack
warming rack button
'cancel' button with indicator
light
browning control
crumb tray
cord storage
to use your toaster
1 Move the browing control to the
desired setting. Use a low setting
for light toasting and for thin
or dry bread. To increase the
browning, gradually move the lever
to the right towards the darkest
setting .
2 Insert the bread, muffins, bagels
etc.
●
Your toaster is fitted with a sensor
which detects when food is placed
into the toaster and lowers the
bread carriage automatically. Once
lowered the cancel button
indicator light will come on. At the
completion of the toasting
operation the toaster will make an
audible noise and the carriage will
rise automatically.
●
To stop toasting at any stage,
press the cancel button .
Note
●
When toasting a single slice of
bread, always place in the front
slot as indicated by the ▼ symbol.
Model TT980 series - make sure
you position the slice on the right
hand side of the slot to activate the
bread carriage.
hints on using your
toaster
●
Select a lower setting for light
browning, for toasting one slice
only or for dry bread.
●
When toasting a single slice of
bread, you may notice a variation
in toast colour from one side to the
other - this is normal.
●
Dry/stale bread toasts more
quickly than fresh bread and thinly
sliced bread toasts more quickly
than thickly sliced bread. Therefore
the browning control should be set
at a lower setting than usual.
●
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
●
In order to achieve uniform
browning we recommend you wait
a minimum of 30 seconds
between each toasting so that the
control can automatically reset.
Alternatively select a lower setting
when additional toasting is carried
out.
●
The warming rack can also be
used as a toast rack, but take care
not to get burnt if it is hot.
●
TT980 series only
●
When toasting two slices of bread,
place one in each slot (see
illustration below).
safety
●
Burnt food can catch fire, so:
●●
never leave your toaster on
unattended;
●●
keep your toaster away from
anything (eg curtains) that could
catch fire;
●●
set the browning control lower for
thin or dry bread;
●●
never warm food with a topping or
filling (eg pizza): if it drips into the
toaster, it could catch fire.
●
To avoid electric shocks, never:
●●
let the toaster, cord or plug get
wet; or
●●
put your hand or anything metal,
eg a knife or foil, into the toaster.
●
Always unplug the toaster when
not in use, before cleaning or
attempting to clear jammed bread.
●
Never cover your toaster with a
plate or anything else - it could
overheat and catch fire. For the
same reason, never completely
cover the warming rack.
●
When using the warming rack,
never wrap the food up. Plastic
wrapping will melt and could catch
fire. Foil will reflect heat, damaging
the toaster.
●
Never let the cord hang down
where a child could grab it. Excess
cord should only be stored in the
cord storage device.
●
Don’t let infirm people use the
machine without supervision.
●
Keep children away from the
machine and never let the cord
hang down where a child could
grab it.
●
Never touch hot surfaces
especially the metal top area and
the warming rack. If you're using
the toast slots, remove the
warming rack so it can't burn you.
●
Never use an unauthorised
attachment.
●
Never use a damaged toaster. Get
it checked or repaired: see 'Service'.
●
This toaster is for domestic use
only.
●
Young children should be
supervised to ensure that they do
not play with the appliance.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your toaster.
Important – UK only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
●
The appliance must be protected
by a 13A approved (BS1362) fuse.
●
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable pug is inadvertently
inserted into a 13A socket outlet.
●
This toaster complies with
European Economic Community
Directive 89/336/EEC.
before using for the first
time
●
Remove all packaging and any
labels.
●
Wind excess cord into the cord
storage device.
●
Operate the toaster once on a
medium setting without bread.