Kenwood SC300 User Manual
Model SC300
Model SC400
Instruction manual
IMPORTANT INFORMATION
PLEASE READ THESE INSTRUCTIONS CAREFULLY
Before using the appliance read the instructions carefully.
The appliance is equipped with a thermostat that limits temperature, a thermofuse and a safety cap. It has
been made in compliance with Australian Standards.
Always connect the appliance to an earthed socket.
Never leave the appliance unattended when still connected to the power supply source.
Never turn the appliance over when using steam.
Always take the plug out of the power supply socket when filling. ATTENTION! The first time the tank is
filled with water some leaking may occur. Do not worry, as this is quite normal and will disappear the next
time the tank is filled.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Never put descaling, aromatic, alcoholic or detergent products into the appliance, as this may damage it
or make it unsafe for use.
Do not touch its hot surfaces. Avoid directing steam towards people.
NB: before unscrewing the Safety Filling Cap proceed as follows :
- Turn off the appliance
- Unplug the power supply
- Slowly unscrew the Safety Filling Cap and wait 5 seconds before completely unscrewing it.
Do not use the appliance if it appears damaged. All repairs, including substitution of the power cable must
be carried out exclusively by the KENWOOD Service centre or KENWOOD authorised Service Agents,
since a special tool is required in order to do this, and to avoid any hazard.
This product has been made for domestic use and not for industrial use.
The appliance meets the requirements of EEC Directive 89/336 concerning electromagnetic compatibility.
MAKE SURE THIS INFORMATION IS EASILY AVAILABLE
Thank you for having chosen our product and allow us to congratulate you for having purchased the KENWOOD
STEAM MOP which has been designed in order to change old methods of manual floor cleaning. This appliance
has been designed to obtain not only perfect floor cleaning but also effective sterilisation of these surfaces.
KENWOOD STEAM MOP achieves a high degree of hygienic and degreasing power on floors since it turns water
into 100 degrees of steam in just a few minutes, so, when contact is made with surfaces, the most stubborn dirt
is removed and, most important, the majority of micro-organisms residing in floor surfaces are eliminated, especially from cracks and joints between tiles.
Analysis carried out has shown how, in just a few seconds, a jet of concentrated steam from KENWOOD STEAM
MOP is able to eliminate up to 90% of mites in dust, largely responsible for respiratory allergies. This amounts to
preventative action, which benefits those persons subject to allergies of this kind. All of this is due to the active
power of steam and without need of detergents or soap, so absolutely ECOLOGICAL.
It’s special feature as a single use appliance (in other words, designed especially to clean floor surfaces) has made
it possible to obtain a very high level of specialisation aimed at achieving equally high results with the appliance.
ADVANTAGES OF STEAM MOP:
KENWOOD STEAM MOP does not form calcium deposits and does not require distilled water.
Its cleaning action is more effective thanks also to a special spherical articulated joint and to a long power cable
that allows the appliance to be guided along the floor, skirting obstacles such as tables and chairs and reaching
under beds and other pieces of furniture.
KENWOOD STEAM MOP has practically unlimited usage since it can be refilled with water without long periods
of waiting.
KENWOOD STEAM MOP is small, light and strong at the same time and can be used by anybody to clean floors
every day with minimum effort.
Your KENWOOD STEAM MOP is ideal for ceramic, marble, vinyl, stone, linoleum and sealed hardwood floors.
It produces heat and steam similar to a steam iron and can reach temperatures in excess of 95°C. Therefore
DO NOT
leave in one spot during use or while hot for more than 15 seconds.
On surfaces that have been treated with wax, the wax may be removed by the heat
and steam action. Do not use on unsealed wood floors or let unit stand on any wood
floor for an extended period of time. This could cause the woodgrain to rise. It is
therefore recommended that a sample cleansing be carried out on an isolated area
of the floor. Also check use and care instructions from the floor manufacturer.
Not recommended for use on CORK or CORK tiles.
DESCRIPTION OF THE APPLIANCE
A Floorcloth
B Main part of the appliance
C On/Off switch
D Safety Filling Cap
E On/Off pilot light
F Power cable
GTelescopic tube
H 165ml measuring cup
I Funnel
L Preheating/cool down stand
Model SC300
L
Loading...