Kenwood PKT-23K User Manual

PKT-23

Pocket-Sized UHF FM Portable Radio

A Powerful Business Radio in the Palm of Your Hand

At only 3.9oz, Kenwood’s PKT-23 UHF two-way radio provides 1.5 watt transmit power, 4 channels, and up to 15 hours of operation. This small but powerful radio is simple to operate and durable, meeting or exceeding MIL-Spec standards 810 C/D/E/F/G (11 items) and IP54 (dust/water intrusion). Connect to the standard micro USB port to charge or use included charging cup, and plug Kenwood headphones into the 3.5mm audio jack for hands free operation. Versatile, strong, and small - the PKT-23 is built business tough.

Actual Size

GENERAL FEATURES

• 1.5 Watts Transmit Power

• 4 Channels

• 39-QT/168-DQT Coded Squelch

• Super Lock (Manager Key Lock)

• Scan Function

• 2 PF Keys

• Enhanced Kenwood Audio

• Micro USB Port

• VOX Ready

• Voice Announcement

• Bell Tone Alert

• LED Battery Status Indicator

• IP54 & MIL-STD 810 C/D/E/F/G 11 items

• Battery Saver

• Time Out Timer

• Monitor

• Wireless Clone

• 2-year Warranty

ACCESSORIES INCLUDED

• KNB-71L - 1,430mAh Li-Ion

• KSC-44 - 3-Hour Fast Charger

• KBH-20 - Belt Clip

• Owner’s Manual

Operating Conditions

Open areas without obstructions

Residential areas (near buildings)

In steel and/or concrete reinforced buildings

In high-rise buildings

Note: Talk range will vary based on terrain and conditions.

Up to 5 miles (8 km)

Up to 1.5 miles (2.4 km)

Up to 225,000 sq.ft (20,900 sq.m)

Up to 17 floors

Options

KNB-71L

■

i-Ion Battery

1,430 mAh)

(

■ KSC-44K

Fast Charger

nd Power Supply

Specifications

Model PKT-23 GENERAL

Frequency Range 451-470 MHz

RS Preset 99 Channels

umber of Channels 4

hannel Spacing

(FCC Narrow Compliant) 12.5 kHz Channel Step 5, 6.25 kHz Operating Voltage 3.8V DC±10%

attery Life (5-5-90 duty cycle)

with KNB-71L (1,430mAh) Approx. 11 hours (Battery saver off)

Operating Temperature Range* -14°F ~ +140°F (-10°C ~ +60°C) Frequency Stability ±2.5ppm (-14°F ~ +140°F)

ntenna Impedance 50 Ω

imensions (W x H x D), Projections not Included

Radio with KNB-71L 1.8 x 3.3 x 0.8 in. (46.0 x 85.0 x 21.0 mm) Weight (net)

Radio with KNB-71L 3.9 oz. (110 g ) FCC ID ALH460300 FCC Compliance Part 90

*Based upon 5% transmit, 5% receive and 90% standby (standard duty cycle)

Approx. 15 hours (Battery saver on)

■ KHS-33

Earbud In-line PTT Headset (Single Pin Jack)

■ KHS-34

C-Ring In-line PTT Headset

(Single Pin Jack)

■ KBH-20

pring Action Belt Clip

■ KMB-44K

Radio Multi-Charger

ll accessories and options may not be available in all markets.

A Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

odel PKT-23

ECEIVER

Sensitivity (12dB SINAD)

Selectivity

ntermodulation Distortion

udio Output 300 mW with less than 5% distortion

TRANSMITTER (Measurements made per TIA/EIA-603)

RF Output Power

purious Response 55 dB

S M

FM HUM & Noise

Audio Distortion Less than 5%

pecifications shown are typical.

S Specifications are subject to change without notice, due to advancements in technology.

ProTalk United States and other countries.

(Measurements made per TIA/EIA-603)

Narrow 0.22 µV

Narrow 60 dB

arrow 50 dB

igh 1.5 W (ERP)

H Low 0.5 W (ERP)

odulation

arrow 11KØF3E

Narrow 50 dB

is a registered trademark of JVCKENWOOD Corporation in the

Applicable MIL-STD & IP

Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G

Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5 Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV

International Protection Standard

Dust & Water Protection IP54

Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

ADS#40013 Printed in USA