Kenwood KRC-759R Instruction Manual

KRC-PS959R KRC-859R KRC-859C KRC-859W KRC-759R

CASSETTE RECEIVER

INSTRUCTION MANUAL

Contents

— 2 —

English

Befor use

Safety precautions.......................................................................................3

Buttons and Display

Basic operations...........................................................................................5

Tuner features..............................................................................................5

RDS features................................................................................................6

Cassette player features..............................................................................6

Disc control features....................................................................................7

Other features..............................................................................................7

Steering remote control...............................................................................8

Remote control............................................................................................8

Basic operations

Stealth Retraction Mechanism.....................................................................8

Switching Modes.........................................................................................9

Volume.........................................................................................................9

Attenuator....................................................................................................9

Loudness ...................................................................................................10

Menu System ............................................................................................10

Tuner features

K2I (Kenwood Intelligent Twin IF)..............................................................12

Selecting Tuning Mode..............................................................................12

Tuning........................................................................................................12

Local Seek Function...................................................................................12

Monaural Reception...................................................................................13

Switching Display for Tuner(non-RDS station)...........................................13

Station Preset Memory..............................................................................13

Auto Memory Entry ...................................................................................14

Direct Access Tuning.................................................................................14

Preset station seek with Programme service name .................................15

RDS features

RDS (Radio Data System)..........................................................................15

EON (Enhanced Other Network)................................................................15

Alarm..........................................................................................................15

AF (Alternative Frequency) Function..........................................................16

Restricting RDS Region (Region Restrict Function)...................................16

Traffic Information Function.......................................................................16

Auto TP Seek Function ..............................................................................17

Presetting Volume for Traffic Information/News .......................................17

News Bulletin Function with PTY News Timeout Setting .........................18

Programme Type (PTY) Function...............................................................18

Cassette player features

Playing Cassette Tapes..............................................................................20

Fast Forwarding and Rewinding Cassette Tapes.......................................20

Using Dolby B/C NR (Noise Reduction) .....................................................20

Switching Tape Types................................................................................20

Blank Skip Function....................................................................................20

Tuner Call Function....................................................................................21

Tape Advance Function..............................................................................21

Music Repeat Function..............................................................................21

Switching Display for Tape ........................................................................21

Disc control features

Playing Disc mode .....................................................................................22

Fast Forwarding and Reversing Disc Play..................................................22

Track Search ..............................................................................................22

Disc Search................................................................................................23

Track / Disc Repeat Function.....................................................................23

Track Scan Function...................................................................................23

Disc Scan Function ....................................................................................24

Random Play Function...............................................................................24

Magazine Random Play Function...............................................................24

Switching Display for Discs .......................................................................25

Text Scroll..................................................................................................25

Presetting Disc Names..............................................................................26

Direct Track Search....................................................................................27

Direct Disc Search .....................................................................................27

Disc Name Preset Play (DNPP)..................................................................28

Other features

Audio Control Setting.................................................................................29

Table of Audio Control Setting...................................................................29

Switching preout........................................................................................30

TEL Mute Function ....................................................................................30

Navigation Mute Function..........................................................................30

Touch sensor tone.....................................................................................30

Automatic Dimmer Function......................................................................31

Selectable Illumination...............................................................................31

Contrast Adjustment..................................................................................31

Switching Spectrum Analyzer Display .......................................................32

Switching Graphic Display .........................................................................32

Switching Clock display .............................................................................32

Adjusting Time...........................................................................................33

Code Security Function..............................................................................34

Basic operations of steering remote control........................35

Basic operations of remote control...........................................36

Installation

Accessories................................................................................................37

Installation Procedure ................................................................................38

Connecting Cables to Terminals................................................................39

Installtion....................................................................................................40

Removing the Unit.....................................................................................41

Attaching Steering Remote Control...........................................................42

Troubleshooting guide......................................................................43

Specifications........................................................................................46

— 3 —

To prevent injury and/or fire, take the following precautions:

• Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts.

• When extending the ignition, battery or ground cables, make sure to use automotivegrade cables or other cables with an area of

0.75mm

(AWG18) or more to prevent cable deterioration and damage to the cable coating.

• To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

• Make sure not to get your fingers caught between the faceplate and the unit.

• Be careful not to drop the unit or subject it to strong shock.

The unit may break or crack because it contains glass parts.

• Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

2WARNING

To prevent damage to the machine, take the following precautions:

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

• To prevent short circuits when replacing a fuse, first disconnect the wiring harness.

• Do not place any object between the faceplate and the unit.

• During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

2CAUTION

IMPORTANT INFORMATION

You cannot connect the unit directly to the following CD automatic changers. For users who want to use older changers with the unit, follow the directions below according to the type of changer you own:

• KDC-C200 / KDC-C300 / KDC-C400

Use the extension cable and the control box attached to the CD changer, and the optional CA-DS100 converter cable.

• KDC-C301 / KDC-C600 / KDC-C800 / KDC-C601 / KDC-C401

Use the extension cable attached to the CD changer, and the optional CA-DS100 converter cable.

• KDC-C100 / KDC-C302 / C205 / C705 / non-Kenwood CD changers

Cannot be used with this model.

You can damage both your unit and the CD changer if you connect them incorrectly.

2CAUTION

Safety precautions

— 4 —

English

• If you experience problems during installation, consult your Kenwood dealer.

• If the unit fails to operate properly, press the RESET button. When the faceplate is not visible, press “the touch-sensitive spot” at the rear of the faceplate (as illustrated on p.9) to make the faceplate control appear. The unit returns to factory settings when the RESET button is pressed. If the unit still fails to operate properly after the RESET button has been pressed, contact your local KENWOOD dealer for assistance.

• Press the reset button if the CD auto changer is first controlled and operates incorrectly. The original operating condition will return.

• We strongly recommend the use of the Code Security function (see p.34) to prevent theft.

NOTE

AUD

DISC

DAB

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

LOUD

40W 4x

DISP/ TEXT

VOL

NAME. S

ADJ

EJECT PROG/PTY

CLOSE PWR OFF

TUNER

Reset button

Cleaning the Unit

If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.

Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.

2CAUTION

Safety precautions

Cleaning the Tape Head

After you have used the tape player many times over a long period, magnetic powder from the tapes and dust accumulates on the tape head, causing noise and a deterioration in sound quality. Clean the tape head using a cleaning tape or cleaning kit designed for use in car audio systems.

Handling Cassette Tapes

• Do not play a cassette whose tape has gone slack. In such a case, wind it tight using a pencil or the like in one of the spools. Playing slack cassette tapes can result in the tape tangling around the capstan and/or pinch rollers, causing trouble.

• Do not play a deformed cassette or one whose label is starting to come off, as it can cause the unit to malfunction.

• Do not leave tapes in hot places, such as above the fascia panel (dashboard) and other spots exposed to direct sunlight, or near heater outlets. They can deform the cassette.

• Avoid using extremely long cassette tapes, such as 100-minute-long tapes. Such tapes are very thin, and can tangle easily around the pinch rollers or other parts inside the unit, causing unit failure.

• Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction.

— 5 —

Buttons and Display

DISC

DAB

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

LOUD

40W 4x

DISP/ TEXT

VOL

NAME. S

ADJ

EJECT PROG/PTY

CLOSE PWR OFF

TUNER

SRC

ATT/LOUD

¢

AUD

DISC

DAB

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

LOUD

40W 4x

DISP/ TEXT

VOL

NAME. S

ADJ

EJECT PROG/PTY

CLOSE PWR OFF

TUNER

SRC

#1~6

¢

DISP

AUD

Basic operations Tuner features

for KRC-859R/C/W, 759R

FM1

92.1

5ch 92.1FM1-

VOLUME 10

LUME 10 VO

AUTO indicator

Frequency

ATT indicator

LOUD indicator

Band display

AUTO indicator

ST indicator

for KRC-859R/C/W, 759R

for KRC-PS959R

ATT indicator

LOUD indicator

for KRC-PS959R

Frequency

Band display

Preset station number

ST indicator

Preset station number

Mode display

Spectrum analyzer display

RDS features Cassette player features

English

Buttons and Display

— 6 —

TAPE-B (((((

E-B 1



TAP

FM3 KENWOOD

6ch KENWOODFM3-

for KRC-859R/C/W, 759R

for KRC-PS959R

for KRC-859R/C/W, 759R

for KRC-PS959R

TI indicator

Band display

™ indicator

TP indicator

TA indicator

TI indicator

Band display

™ indicator

TP indicator

TA indicator

¢ indicator

Number of tracks to be skipped

B NR indicator

MTL indicator

Tape side

¢ indicator

Number of tracks to be skipped

B/C NR indicator

MTL indicator

Tape side

REG indicator

NEWS indicator

REG indicator

NEWS indicator

Tape running display

Character display

Mode display

Tape running display

TI/

38/

PTY

40W 4x

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

LOUD

TUNER

VOL ADJ

AUD

DISP

DISP/ TEXT

EJECT PROG/PTY

DAB

NAME. S

CLOSE PWR OFF

DISC

LOUD

/EJECT

40W 4x

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

TUNER

DISP

DISP/

VOL

TEXT

ADJ

EJECT PROG/PTY

DAB

AUD

DISC

NAME. S

CLOSE PWR OFF

PROG

38/

SRC

#1~6

¢

B.S

REP

T.C

MTL

¢

— 7 —

Other features

DISP/

Disc control features

FM1 1235

92.1FM1

12:35

for KRC-859R/C/W, 759R

for KRC-PS959R

Clock display

Clock display / Spectrum analyzer display

£ indicator

CH T-08 235

T-08 : 2:35D06

for KRC-859R/C/W, 759R

for KRC-PS959R

Disc number

Track number

Track time/ Direct inputted track number/ Direct inputted disc number

Disc number

Track number

Mode display

TEXT indicator

Graphic display

AUDIO CONTROL indicator

40W 4x

B NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENU

LOUD

RDM

REPSCAN

TUNER

D.SCN

M.RDM

NAME.S

VOL ADJ

EJECT PROG/PTY

AUD

SRC

DISP/ TEXT

NAME. S

CLOSE PWR OFF

DAB

DISC

¢

AM/ DISC–

FM/ DISC+

40W 4x

LOUD

B C NR SCAN B.S/RDM REP T.C/D.SCN MTL/M.RDM MENUCLK/ANA

CLK/ANA

#1~4

TUNER

VOL ADJ

AUD

AUD/MENU

DISP

DISP/ TEXT

EJECT

PROG/PTY

DAB

AM/ NF

SRC

NAME. S

CLOSE PWR OFF

DISC

¢

VOL.

TUNE

TRACK

REMOTE CONTROL UNIT

DISC

REW FF

#0~9

A~Z

TUNE

TRACK +

TUNE –

TRACK –

REW

DISC –

DISC +

TUNER

TAPE

DIRECT OK

MD CH

DNPP

PROG

1 2 3

4 5 6

7 8 9

DEF

MNOJKLGHI

WXYTUVPRS

ABC

TUNER

TAPE

CD·MD

–

PROG

–

DIRECT

DNPP

Remote control

Steering remote control

VOLUME

SRC

AM/DISC

–

FM/DISC+

¢

ATT

DWN

∞

AM/DISC –

FM/DISC +

SRC

ATT

¢

Optional

English

— 8 —

Buttons and Display Basic operations (See page 5)

Stealth Retraction Mechanism

You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio.

Power ON/OFF:

When you turn your vehicle’s ignition on, the unit’s power will also turn on, with the faceplate reversing to show the control panel. When you turn your vehicle’s ignition off, the faceplate will reverse to hide the control panel, and the unit’s power will turn off.

• When the moving faceplate is hit by an object, it will stop and return to its original state. Remove the object and repeat the action.

• The status of the Code Security Function (P.34) is displayed whenever the power is switched on. "CODE ON" (Code Security has been registered) "CODE OFF" (Code Security has not been registered)

Using the Unit in Vehicles with Covered Consoles

• Make sure the console is uncovered whilst the faceplate is

reversed.

• Do not exert any excess force on the movable parts of the unit, including the faceplate, as it can cause failure in the unit’s mechanism.

Hiding the unit with the ignition turned on (forced closing):

Hold down the SRC button for one second or more. The faceplate will reverse, hiding the unit. The unit will turn off.

• When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly.

• Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit.

NOTE

2CAUTION

NOTE

Optional for the KRC-759R

— 9 —

• During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off, unless “the touch-sensitive spot” at the rear of the faceplate is pressed in order to open it. You can prevent tampering of the unit when letting someone else drive your car by keeping it closed this way.

To cancel the stealth retraction mechanism’s forced closing of unit and open control panel:

Press “the touch-sensitive spot” at the rear of the faceplate. (as illustrated)

Touch-sensitive spot

The invisible switch is hiding behind the touch-sensitive spot. Press the hollow spot (invisible switch) to open.

NOTE

Touch-sensitive spot

Switching Modes

Switching Modes:

Each time you press the SRC button, the mode switches as follows:

▼

Tuner mode

▼

Tape mode

▼

Disc control mode

• The mode switches to the next mode from any mode which cannot be used.

• The disc control mode will differ depending on the unit that is connected.

NOTE

Volume

Increasing Volume:

Press the u button to turn up the volume.

Decreasing Volume:

Press the d button to turn down the volume.

Attenuator

This function allows you to turn down the volume quickly.

Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level.

Turning down the volume all the way turns off the attenuator function.

NOTE

— 10 —

English

Basic operations (See page 5)

Loudness

This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on.

Turning Loudness On/Off:

Hold down the LOUD button for one second or more to switch the loudness on and off.

Ending the menu mode

Press the MENU button.

• Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function.

• The News function turns on when the setting is made for the news interruption interval. The "##MIN" display indicates the setting selected for the news interruption timeout interval.

• The "##" display indicates the setting value.

NOTE

Menu System

To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page.

Hold down the MENU button for one second or more.

"MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displayed.

Selecting function to set

Press the ¢ button to search through the functions until you see the one you want to adjust in the display. Press the 4 button to search through the functions backward. Example: If you want to switch the tuning mode from AUTO1

to manual, first search through the functions until you see "AUTO 1" in the display.

Changing setting for currently displayed function

Press either the AM or FM button. The setting will change for each function. Example: The tuning mode will switch from AUTO 1 to AUTO

2. Pressing the button again switches the setting to manual, and "MANUAL" is displayed.

AUTO 1

AUTO 2 MANUAL

MENU AUTO 1

for KRC-PS959R

for KRC-859R/C/W,759R

— 11 —

↓

CLOCK ON ↔ CLOCK OFF

↑↓

CLOCK ADJST (Time Adjustment mode entered)

↑↓

SYNC ON ↔ SYNC OFF

↑↓

SECURITY

↑↓

COLOR GREEN ↔ COLOR AMBER

↑↓

CONTRAST ##

↑↓

GRAPHIC ON ↔ GRAPHIC OFF

↑↓

BEEP ON ↔ BEEP OFF

↑↓

SWPRE FRONT ↔ SWPRE N-FAD

↑↓

NEWS OFF ↔ NEWS ##MIN

↑↓

LOCAL.S OFF ↔ LOCAL.S ON

↑↓

AUTO1 → AUTO2 → MANUAL

↑↓

AUTO-MEMORY (start)

↑↓

AF ON ↔ AF OFF

↑↓

REG ON ↔ REG OFF

↑↓

ATPS ON ↔ ATPS OFF

↑↓

MONO OFF ↔ MONO ON

↑↓

SCROLL MANU ↔ SCROLL AUTO

↑

Function

Varieties of settings for

each function (display)

Switching Clock Display Time Adjustment (Manual)

Automatic Time Adjustment Security mode Selectable Illumination Contrast Adjustment Switching Graphic Display Touch Sensor Tone Switching Preout News Bulletin Function Local seek Selecting Tuning Mode Auto Memory Entry AF Function Region Restrict Function Auto TP Seek Monaural Reception Text Scroll

KRC-PS959R Only

KRC-859R/C/W,759R Only

KRC-PS959R,859R/C/W Only

— 12 —

English

Tuner features (See page 5)

Selecting Tuning Mode

You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO1” indicator lights up when auto seek tuning is selected, and the “AUTO2” indicator lights when preset station seek tuning is selected.

Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

Press the ¢ button repeatedly until the tuning function appears in the display. Press the 4 button to search in the other direction. The tuning method is displayed as ”AUTO 1“, ”AUTO 2“, or ”MANUAL“ referring respectively to auto seek tuning, preset station seek tuning, and manual tuning.

Switching settings

Press either the AM button or FM button to switch the tuning mode. The display and setting will change.

Press the MENU button to end the menu mode.

Tuning

Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected.

Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands.

•Auto Seek Tuning

Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies.

With the local seek function turned on, auto seek tuning skips stations with relatively poor reception.

Turning Local Seek Function On/Off:

Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

Press the ¢ button repeatedly until the local seek function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "LOCAL.S ON" or "LOCAL.S OFF" in the display, indicating that the local seek function is on or off, respectively.

Switching settings

Press either the AM button or FM button. The display and setting will change.

Press the MENU button to end the menu mode.

Local Seek Function

K2I (Kenwood Intelligent Twin IF)

When the frequency of another station is too close to that of the station currently being listened to, interfering with proper reception, this function automatically narrows the range of received frequencies to prevent such interference.

•Preset station seek tuning Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).

If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1.

•Manual Tuning Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.

The ST indicator lights up when stereo broadcasts are being received.

NOTE

— 13 —

When poor stereo reception is experienced, this function will reduce noise and improve listening conditions.

Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

Press the ¢ button repeatedly until the monaural reception function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "MONO ON" or "MONO OFF" in the display, indicating that monaural reception is on or off, respectively.

Switching settings

Press either the AM button or FM button. The display and setting will change.

Press the MENU button to end the menu mode.

Monaural Reception

Switching Display for Tuner(non-RDS station)

Switching Display:

Each time you press the DISP button, the display switches between the frequency and Clock.

• When the switching clock display (P.32) is set to off, the display will not switch to the clock display.

• The £ indicator lights whilst the clock is displayed.

NOTE

Function of the KRC-859R/C/W,759R

Station Preset Memory

Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.

Select the band/ station that you want to have stored. Hold down the button (#1-6) that you want to use for the

station, for two seconds or more. The button number blinks once in the display to indicate that the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands.

NOTE

— 14 —

English

Tuner features (See page 5)

Auto Memory Entry

You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way.

Select the band for auto memory entry. Hold down the MENU button for one second or more.

"MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until "AUTO-MEMORY"

appears in the display. Press the 4 button to search in the other direction.

Hold down either the AM button or FM button for two seconds or more to start auto memory function. The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

• When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3.

• When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored.

• When the Traffic Information function is on , only the local traffic information station frequency will be stored.

Cancelling Auto Memory Entry During Its Operation:

Press the MENU button whilst auto memory entry is taking place to stop the process.

NOTE

Direct Access Tuning

When you already know the frequency of the station that you want to listen to, you can enter it directly for quick access.

Select the band by pressing the FM or AM button. Press the DIRECT button.

The frequency part of the display blinks for 10 seconds. If you make no input in the 10-second period, direct access tuning is automatically cancelled.

Enter the frequency of the desired station whilst the display is blinking. If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1. If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0.

• When a frequency which cannot be received is input, this frequency is not verified and operation returns to the original frequency input mode.

• FM frequencies can only be input in 0.1 MHz steps, and not in

0.01 steps.

Cancelling Direct Access Tuning:

Press the DIRECT button again.

NOTE

Function of Remote control with number/letter

entry buttons (See page 8)

+ 32 hidden pages