©
2002-12 PRINTED IN JAPAN
B53-0017-00 (N)1874
DC cord
(E30-4790-05)
Plastic cabinet assy
(A02-1486-13)
Lever
(D10-4589-04)x2
Mounting hardware assy
(J22-0011-03)
Antenna adaptor
(T90-0523-05)
Screw set
(N99-1730-15)
DOLBY B NR
Panel assy
(A64-2850-02): KRC-594 /Y
(A64-2852-02): KRC-594V/YV
Escutcheon
(B07-3083-02)
CASSETTE RECEIVER
KRC-594/V/Y/YV
SERVICE MANUAL
The CASSETTE MECHANISM OPERATION DESCRIPTION is the same model D40-1122-05.
Please refer to the service manual for model D40-1122-05 (B51-7452-00).
KRC-594/V/Y/YV
2
DISASSEMBLY FOR REPAIR
How to remove the Volume Knob
1. Remove the rear cover of panel unit.
2. Juck up as remove the switch unit (x16-) and Volume Knob
as shown.
(CAUTION)
Volume Knob cannot pull of front side that looked at tab
point in the rotary encoder.
LIGHTING BOARD
CAP
Be careful of direction.
Rib: tall
CAP
KNOB(VOL)
Dented part
Rib: short
How to install the Volume Knob
1. Remove the peeling paper of LIGHTING BOARD BOSS
side.
2. CAP and LIGHTING BOARD are install positioning as
shown.
5. Install a Volume Knob in rotary encoder positioning as
shown.
KNOB(VOL)
BROAD SIDE
OTHER SIDE
Mount the Volume Knob into
the broad Y shaped cutting in
the direction of the picture.
3. Remove the peeling paper.(Use Tweezers)
4. CAP and Volume Knob are install positioning as shown.