Kenwood KPG-46U, KPG-43U, KPG-22U, KPG-36U User Manual
USB PROGRAMMING INTERFACE CABLE
KPG-22U/ 36U/ 43U/ 46U
INSTALLATION MANUAL
SUPPLIED ITEMS
• USB adapter (USB 2.0 compliant)
• CD (with driver software)
• Installation Manual
SYSTEM REQUIREMENT
Operating System:
Windows 2000/ Windows XP/ Windows Vista/ Windows 7
INSTALLING THE DRIVER
ATTENTION:
the first time, install the supplied KPG-22U/ 36U/ 43U/ 46U driver.
With the computer power on, insert the supplied CD into your
1
CD-ROM drive. Double-click the
2K3_Vista_7.exe
click
Read through the licensing agreement, check the “I accept
2
the terms of the license agreement” box, then click
Select the desired folder to copy the driver file to your
3
computer, then click
Begin the installation by clicking
4
When the driver finishes copying to the computer, click the
5
[
Launch the CP210xVCP Driver Installer
[
Finish
The drivers are installed sequentially. Select the desired
6
folder to copy the driver file to your computer, then click
[
Install
[
A
7
Reboot Now?
finished copying to the computer. Click
installation.
Note:
The KPG-22U/ 36U/ 43U/ 46U is installed as a virtual port
♦
driver.
The KPG-22U/ 36U/ 43U/ 46U does not support programs
♦
other than those used for Kenwood transceivers.
If the driver cannot be installed or if, having installed the driver
♦
and restarting your computer, the driver cannot be found or
the operation does not stabilize, try changing the USB port
to which you have connected the KPG-22U/ 36U/ 43U/ 46U.
Additionally, try removing other equipment attached to the
computer USB ports.
Please access the following URL for the driver download
♦
information:
http://www.kenwood.com/usb-com/
CONFIRMING THE INSTALLATION
Connect the KPG-22U/ 36U/ 43U/ 46U to a USB port. In
the “
Device Manager
If “
Silicon Labs CP210x USB to UART Bridge (COMx)
appears, installation is complete.
UNINSTALLING THE DRIVER
In the “Program Installation and Deletion” screen, uninstall the
following items:
[
Silicon Laboratories CP210x USB to UART Bridge (Driver
Removal)
[
Silicon Laboratories CP210x VCP Drivers for Windows
XP/2003 Server/Vista /7
When installing the KPG-22U/ 36U/ 43U/ 46U for
[
CP201x_VCP_Win_XP_S
]
.
]
[
Yes
.
[Install
Port (COM and LPT)
[
Next>
]
.
]
.
]
file. When the Installation Wizard begins,
]]
.
[
Next>
]
dialog box appears when the files have
”, open the “
]
]
[
Next>
]
box, then click
]
to complete the
”.
”
]
© B62-2326-00 (M)
Copyrights
• Windows® and Windows Vista® are registered trademark
of Microsoft Corporation in the United States and/or other
countries.
• Other product and company names mentioned herein may
be the trademarks of their respective owners.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
One or more of the following statements may be applicable to this
equipment.
.
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can generate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that the inter ference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer for technical assistance.
Information on Disposal of Old Electrical and Electronic Equipment and
Batteries (applicable for EU countries that have adopted separate waste
collection systems)
Products and batteries with the symbol (crossed-out wheeled bin)
cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled
at a facility capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility
nearest to you.
Proper recycling and waste disposal will help conserve resources whilst
preventing detrimental effects on our health and the environment.
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda
Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun
olarak üretilmiştir.
is product complies with Directive, Number 26891 regarding "REGULATION ON
THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN
ELECTRICAL AND ELECTRONIC EQUIPMENT".
Authorized Representative in Europe:
Kenwood Electronics Europe B.V.
Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands
Manufacturer:
Kenwood Corporation
1-16-2 Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 2268525 Japan
Loading...