Kenwood KGP-2B, KGP-2A User Manual

Mobile Station
KGP-2A/KGP-2B
GPS Receiver-Modem & Controller-Modem
Mobile transceiver
Base transceiver
KGP-2A
GPS Receiver-Modem
Base Station
PC
KGP-2B
GPS Controller-Modem
The KGP-2A GPS receiver-modem unit and
KGP-2B GPS controller-modem unit from Kenwood offer a cost-effective way to implement a GPS AVL (Global Positioning System – Automatic Vehicle Location) solution* into any two-way system. AVL offers efficient dispatch management of taxi, delivery and service vehicles, plus enhanced security with advanced monitoring and control capabilities.
*The KGP-2A/B units require a KGP-2A/B compatible AVL/dispatch software running on a base/control
station computer.The Global Positioning System (GPS) constellation of satellites is opera ted by the U.S.
government, which is solely responsible for its accuracy and maintenance. The system is subject to
change without notice which could affect the accuracy and performance of all GPS equipment.
Mobile Station
JQA-QMA1205
Compact Lightweight Design
Measuring just 5.51 x 1.81 x 3.94 inches (W x H x D) and weighing 1.01 pounds, the KGP-2A can be easily installed in any vehicle.
Multi-purpose
Programmable I/O’s
Each KGP-2A has sixteen programmable I/O’s for either an analog “input” or output” [available at external connectors ACC2 (DB-9) & ACC-3 (DB-15)]. The inputs are useful for vehicular sensors, switches, contacts, etc. and generate a report to the KGP-2B base unit each time the status changes*. The outputs can be used to trigger external relays and controls*. A KGP-2B base unit can be commanded by a control/base station computer running a KGP-2A/2B AVL dispatcher application to activate/deactivate KGP-2A fleet unit outputs and/or poll current input/output status.
* Requires additional circuitry and added parts; also requires
a KGP-2A/B compatible AVL/dispatch software
capable of utilizing these I/O’s.
Base Station
Compact Lightweight Design
Measuring just 5.51 x 1.81 x 3.94 inches (W x H x D) and weighing 0.93 pounds, the KGP-2B can be easily installed out of the way base installation.
MI L-STD Environmental Standards
Compliance with MIL-STD 810 C/D/E environmental standards for resistance to dust, vibration and shock ensures stable performance even in demanding conditions.
KGP-2A GPS RECEIVER-MODEM
MI L-STD Environmental Standards
Compliance with MIL-STD 810 C/D/E environmental stan­dards for resistance to dust, vibration and shock ensures stable performance even in demanding conditions.
The receiver features a modern DSP-type modem (Digital Signal Processor) capable of 1200/2400 bps data communications.
DS P Modem
The receiver features a modern DSP-type modem (Digital Signal Processor) capable of 1200/2400 bps data communications.
rear panel
DS P Modem
LED Status Indicators
LEDs provide a quick troubleshooting indica­tor to confirm DC power, data communica­tions with the connected mobile radio or if a GPS signal is being received.
Flash Memory
Flash memory permits uploading KGP-2A/2B unit firmware upgrades with a computer.
Control
The KGP-2A/2B air protocol commands permit a KGP-2B base unit to request any KGP-2A fleet unit to send any currently stored data or mobile station settings. AVL mapping / dispatch CAD software developers are provided with these commands and all protocol information to utilize in their products.
Main Data TX Commands
Single Call Multiple Call Group Call Auto Data TX Request District Call Emergency Input Data Request (I/IO input ports; contact closures, sensors, etc.)
Main Mobile Station Settings
Outputs Data Request (I/O ports outputs) GPS Data
LED Status Indicators
LEDs provide a quick troubleshooting indicator to confirm DC power, data commu­nications with the connected mobile radio.
KGP-2B GPS CONTROLLER-MODEM
Options
KCT-40
Interface Cable (for TK-7180/8180 7150/8150 mobiles)
KCT-34
Interface Cable (for TK-780/880 980/981 mobiles)
*1
160G/62G-Series Mobiles: TK-760G/762G/860G/862G/768G/868G/863G except for European models
KCT-35
Interface Cable (for 60G/62G-Series mobiles)
Not all accessories may be available, please contact dealers for details.
Applicable MIL-STD
Military Standard Method / Procedure Method / Procedure Method / Procedure
810C 810D 810E Dust 510.1/Proc. 1 510.2/Proc. 1 510.3/Proc. 1 Vibration 514.2/Proc. 8,10 514.3/Proc. 1 Cat.8 514.4/Proc. 1 Cat.8 Shock 516.2/Proc. 1,2,5 516.3/Proc. 1,4 516.4/Proc. 1,4
KCT-36
Extension Cable
*1
(for KCT-34/35/40)
Flash Memory
Flash memory permits uploading KGP-2A/2B unit firmware upgrades with a computer.
rear panel
Specifications
General Specification Dimensions (W x H x D) without projections 5.51 x 1.81 x 3.94 in (140 x 46 x 100mm) Weight: KGP-2A 1.01 lbs (460 g)
KGP-2B 0.93 lbs (420 g) Standard Input Voltage DC 13.6V negative ground (Input Voltage Range) (DC 10.0V to 15.7V) Temperature Range -22°F to + 140°F (-30°C to + 60°C) Current Drain < 300 mA (KGP-2A) , < 240 mA (KGP-2B) GPS Receiver Unit (applies to KGP-2A only) Receiver Type Parallel 9 channels Receiver Frequency 1,575.42 MHz Supply Voltage to Antenna DC 3.3V ± 0.2 V GPS Backup Term More than 2 month (fully charged) Modem Modulation Minimum shift keying (MSK) Modulation Rate 1,200 / 2,400 bps Modem Encode Level Range 100 ~ 1,000 mVrms Modem Decode Level Range 100 ~ 1,000 mVrms Input Impedance 600 Output Impedance 600
Kenwood follows the policy of continuous advancement in development.
For this reason specifications may be changed without notice.
ADS#44507 Printed in USA
Loading...