Kenwood HM620 series Instructions Manual
English 2 - 6
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
120845/2
instructions
HM620 series
´¸∂w
7 - 01
safety
●
Read these instructions carefully and retain
for future reference.
●
Remove all packaging and any labels.
●
Ensure the cord is fully unwound from the
cord wrap before using the handmixer.
●
Never put the handmixer body in water or let
the cord or plug get wet.
●
Keep fingers, hair, clothing and utensils away
from moving parts.
●
Never let the cord touch hot surfaces or
hang down where a child could grab it.
●
Never use a damaged handmixer. Get it
checked or repaired: see 'service and
customer care'.
●
Never use an unauthorised attachment.
●
Always unplug the appliance when not in
use, before fitting or removing parts or before
cleaning.
●
Appliances can be used by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and if they
understand the hazards involved.
●
Misuse of your appliance can result in injury.
●
This appliance shall not be used by children.
Keep the appliance and its cord out of reach
of children.
●
Children should be supervised to ensure that
they do not play with the appliance.
English
2
햴
햶
햳
햲
햵
햷
햸
햹
햸
햹
햺
햻
●
Only use the appliance for its intended
domestic use. Kenwood will not accept any
liability if the appliance is subject to improper
use, or failure to comply with these
instructions.
3
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
rear of your handmixer.
Important – UK only
●
The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
●
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using your handmixer
for the first time
●
Wash the parts (see 'cleaning').
key
speed switch
tool release button
beaters
cord wrap
kneader with small collar
kneader with large collar
beater storage pillars
kneader storage pillars
worktop storage unit
cord tidy
to use your handmixer
1 Unwrap the cord from the cord
wrap and make sure the speed
switch is in the off “O” position.
2 Insert the beaters or kneaders –
turn and push until a positive click is
felt.
Important: The kneader with the
small collar will only fit into the
larger socket.
3 Plug in.
4 With the ingredients in a bowl of an
appropriate size, place the
beaters/kneaders into the bowl.
5 Pull the speed switch backwards to
reach the desired speed (the first
dot on the handmixer body is the
slowest speed setting). Line up the
dot on the side of the speed switch
with the corresponding speed.
●
As the mixture thickens, increase
the speed.
●
If the machine starts to slow or
labour, increase the speed.
●
Move the speed switch forwards to
the pulse “P” position to operate the
motor at maximum speed. The
motor will operate for as long as the
pulse is held in position.
6 When the mixture has reached the
desired consistency, return the
speed switch to the off “O” position
and then lift the beaters/kneaders
out of the bowl.
Loading...