CD/VIDEO-CD/DVD PLAYER
73
¢
4
¡
1
MIC 2MIC 1
POWER
- ON – OFF
ON / STANDBY
SHUTTLE
0
w∑
8
/
MIC LEVEL
MIC 1 MIC 2
FL
DISPLAY
(PCM/BIT STREAM)
COAXIAL OPTICAL
DIGITAL OUTPUT
CENTER
S VIDEO
OUTPUT
VIDEO
OUTPUT
MIX LINE
OUTPUT
SUB
WOOFER
SURROUNDFRONT
6CH. OUTPUT
L
R
1
2
SYSTEM
CONTROL
DV-K751/S701
SERVICE MANUAL
© 1998-8/B51-5468-00 (K/K) 3547
Knob
(K29-6835-22)
Phono jack
(E11-0366-05)
Miniature phone jack
(E11-0188-05)
Indicator
(B12-0311-04)
Oscillating module
(W02-1114-05)
Knob
(K27-2249-04)
Knob
(K29-6835-22)
Knob
(K29-6677-03)
Phono jack
(E63-0122-05)
Dressing panel
(A21-3728-03)
Front glass
(B10-2386-12)
Cylindrical receptacle
(E56-0014-05)
Knob
(K29-6679-03)
Dressing panel
(A21-3627-12)
Knob
(K29-6835-22)
Power cord bushing
(J42-0083-05)
Panel *
(A60-)
Knob
(K29-6945-04)
Phono jack
(E63-0128-05)
Phono jack
(E63-1052-05)
In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product
safety.
KENWOOD-Crop. certifies this equipment conforms to DHHS
Regulations No. 21 DFR 1040. 10, Chapter 1, Subchapter J.
DANGER : Laser radiation when open and interlock defeated.
Phono jack
(E63-1064-05)
AVOID DIRECT EXPOSURE TO BEAM
AC power cord *
(E30-)
Illust. is DV-K751.
* Refer to parts list on page 33.
Caution : No connection of ground line if disassemble the
unit. Please connect the ground line on rear
panel, PCBs, Chassis and some others.
NOTE : Please replace the mechanism PCB
(W02-266x-05) with new one, if it is
malfunction.
Audio
(E30-0505-05) (E30-1427-05)
(E30-2365-05)
(E30-2733-05)
cord (Red, White) ...... (3)
Remote
(A70-1231-05): RC-D0703: M2T1E1
(A70-1243-05): RC-D0704: K
(A70-1244-05): RC-D0706: M1C1
Battery cover (A09-1105-05)
control unit ............. (1) Batteries (R6/AA) ................. (2)
Digital cord (Orange)......... (1)
Video cord (Yellow).............. ( 1 )
System control cord ......... (1)
AC
(E03-0115-05)
plug adaptor ............. (1 )
Use to adapt the plug on the power cord to the shape
of the wall outlet.
(Accessory only for regions where use is necessary.)
DV-K751/S701
CONTENTS / ACCESSORIES
Contents
CONTENTS / ACCESSORIES ...................................2
CAUTIONS...................................................................3
CONTROLS.................................................................4
BLOCK DIAGRAM.......................................................8
CIRCUIT DESCRIPTION.............................................9
ADJUSTMENT.......................................................... 10
Accessories
PARTS DESCRIPTIONS...........................................12
PC BOARD ................................................................13
SCHEMATIC DIAGRAM............................................17
EXPLODED VIEW .....................................................30
PARTS LIST...............................................................33
SPECIFICATIONS.....................................................43
2
Operation to reset
The microprocessor may fall into malfunction (impossibility to operate
erroneous display, etc.) when the power cord is unplugged while power
is ON or due to an external factor. In this case, execute the following
procedure to reset the microprocessor and return it to normal condition.
÷ Please note that resetting the microprocessor clears the contents
stored in, it returns the microprocessor to the condition when it left
the factory.
Perform the following operation.
1 Press the POWER key to the ON position.
2 Press the ON/STANDBY (
) key to ON.
3 Wait for a few seconds to ensure that the display shows “NO
DISC”.
4 While holding the 7 key, press and hold the ON/STANDBY
(
) key until “INITIAL OK!” appears.
NO DISC
Note related to transportation and movement
Before transporting or moving this unit, be sure to remove any
disc from it and carry out the following operation.
1. Press the POWER key to the ON position.
2. Press the ON/STANDBY (
) key to ON.
3. Wait a few seconds and verify that the display shown appears.
4.Set the POWER key to OFF.
Operation to reset
The microprocessor may fall into malfunction (impossibility to operate
erroneous display, etc.) when the power cord is unplugged while power
is ON or due to an external factor. In this case, execute the following
procedure to reset the microprocessor and return it to normal condition.
÷ Please note that resetting the microprocessor clears the contents
stored in, it returns the microprocessor to the condition when it left
the factory.
Perform the following operation.
1 Press the MAIN POWER key to the ON position.
2 Press the REMOTE POWER key to ON.
3 Wait for a few seconds to ensure that the display shows “NO
DISC”.
4 While holding the 7 key, press and hold the REMOTE POWER key
until “INITIAL OK!” appears.
NO DISC
Note related to transportation and movement
Before transporting or moving this unit, be sure to remove any
disc from it and carry out the following operation.
1. Press the MAIN POWER key to the ON position.
2.Press the REMOTE POWER key to ON.
3. Wait a few seconds and verify that the display shown appears.
4.Set the MAIN POWER key to OFF.
WITH ON/STANDBY KEY
DV-K751/S701
CAUTIONS
WITH REMOTE POWER KEY
3
4
73
¢4
¡1
MIC 2MIC 1
POWER
- ON – OFF
ON / STANDBY
SHUTTLE
0
w∑8
/
MIC LEVEL
MIC 1 MIC 2
FL
DISPLAY
1
6
8
32 4 5
7
0 ! @ # $ % ^
DVD VCD CD
P.B.C. DOLBY DIGITAL RANDOM PROG.
STEREO
ANGLE
PCM
REPEAT ALL
LR
TITLE CHAPTER TRACK
A B
•••••••••••••••
KARAOKE
9
POWER
- ON – OFF
Display / Main unit (DV-K751)
L, STEREO, R indicators
Character information display
Operation indicators
3 :Play
8 :Pause
DVD, VCD, CD indicators
Special playback related indicators
Display
VCD and CD related indicators
DVD related indicators
1 ON/STANDBY ( ) key
Press to turn power of the unit from on to standby or vice versa.
2 Standby indicator
3 Remote control sensor
4 FL DISPLAY key
5 DVD indicator
Lights when a DVD disc is played.
6 Disc tray
7 Open/Close (0) key
8 SHUTTLE (1, ¡) keys
9 POWER (
POWER) key
Press to turn the power of the unit between the standby and off
modes.
0 MIC 1 and MIC 2 jacks
! MIC 1 level
up :
down :
@ MIC 2 level
up :
down :
# Skip down (4) / up (¢) keys
$ Still/Pause (
) key
% Stop (7) key
^ Play (3) key
* The panel
indications are
variable depending
on the area where
the nuit is
marketed.
About the standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called th
standby mode. Under that condition, the system can be turned ON by the remote control unit.
Display / Main unit (DV-S701)
L, STEREO, R indicators
Character information display
Operation indicators
3 :Play
8 :Pause
DVD, VCD, CD indicators
Special playback related indicators
About the standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called the
standby mode. Under that condition, the system can be turned ON by the remote control unit.
Display
VCD and CD related indicators
DVD related indicators
1 ON/STANDBY ( ) key
Press to turn power of the unit from on to standby or vice versa.
2 Standby indicator
3 Remote control sensor
4 FL DISPLAY key
5 DVD indicator
Lights when a DVD disc is played.
6 Disc tray
7 Open/Close (0) key
8 SHUTTLE (1, ¡) keys
9 POWER key
Press to turn the power of the unit between the standby and off
modes.
0 TEXT DISPLAY key
! ALL INFO. key
@ TITLE SEARCH key
# REPEAT key
$ Skip down (4) / up (¢) keys
% Still/Pause ( ) key
^ Stop (7) key
& Play (3) key
DV-K751/S701
32 4 5
1
DISPLAY
ON / STANDBY
POWER
- ON – OFF
9
TEXT
ALL
TITLE
DISPLAY
INFO.
SEARCHREPEAT
0 ! @ #
DVD VCD CD
P.B.C. DOLBY DIGITAL RANDOM PROG.
TITLE CHAPTER TRACK CD TEXT
•••••••••••••••
6
FL
7
0
/
w∑8
¢4
8
SHUTTLE
¡1
73
$ % ^ &
CONTROLS
MPEG
PCM
ANGLE
REPEAT ALL
A B
STEREO
LR
(PCM/BIT STREAM)
COAXIAL OPTICAL
DIGITAL OUTPUT
CENTER
S VIDEO
OUTPUT
VIDEO
OUTPUT
MIX LINE
OUTPUT
SUB
WOOFER
SURROUNDFRONT
6CH. OUTPUT
L
R
1
2
SYSTEM
CONTROL
OPTICAL IN/Optical fiber cable (commercially available)
Monitor TV
(commercially available)
DV-S701(OTHER AREA)/DV-K751
To wall AC
outlet
COAXIAL IN/Digital cord (75Ωcoaxial) (provided)
AV CONTROL CENTER (sold separately) or
receiver (sold separately)
VIDEO OUT/Video cord (75Ωcoaxial) (commercially available)
S-VIDEO IN
S-VIDEO OUT/S-VIDEO cord (commercially available)
VIDEO IN
CENTER IN/Audio cord (provided)
SUBWOOFER IN/Audio cord (provided)
FRONT L/R IN/Audio cord (provided)
SURROUND L/R IN/Audio cord (provided)
S-VIDEO IN/S-VIDEO cord (commercially available)
VIDEO IN/Video cord (75Ωcoaxial) (provided)
Connect the cords and cables according to the jacks available on the connected AV receiver.
*If you want to use
the macro function
of a KENWOOD AV
CONTROL CENTER
(sold separately),
connect this player
to a wall AC outlet.
Be sure to set the
POWER switch on
the front panel of
this unit to OFF
when you are going
to leave the unit
unattended for
going out of the
house, etc.
Make connection as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
1.Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
The VIDEO OUTPUT jacks should be connected directly to the TV. Do
not connect them to the TV via a VCR. Otherwise the played video
may be disturbed due to the copy protection function.
Initial setup
Set initial setup [6. TV Aspect] according to the aspect ratio (4:3 or
16:9) of your TV.
SYSTEM CONTROL IN/System control cord (provided)
Stereo system (commercially available)
* The connected components shown here are typical examples.
(PCM/BIT STREAM)
COAXIAL OPTICAL
DIGITAL OUTPUT
S VIDEO
OUTPUT
VIDEO
OUTPUT
AUDIO
OUTPUT
L
R
1
1
2
2
SYSTEM
CONTROL
OPTICAL IN/Optical fiber cable (commercially available)
Monitor TV
(commercially available)
DV-S701(U.S.A.)
To wall AC
outlet
COAXIAL IN/Digital cord (75Ωcoaxial) (provided)
VIDEO OUT/Video cord (75Ωcoaxial) (commercially available)
S-VIDEO IN
S-VIDEO OUT/S-VIDEO cord (commercially available)
VIDEO IN
FRONT L/R IN/Audio cord (provided)
S-VIDEO IN/S-VIDEO cord (commercially available)
VIDEO IN/Video cord (75Ωcoaxial) (provided)
Connect the cords and cables according to the jacks available on the connected AV receiver.
*If you want to use
the macro function
of a KENWOOD AV
CONTROL CENTER
(sold separately),
connect this player
to a wall AC outlet.
Be sure to set the
POWER switch on
the front panel of
this unit to OFF
when you are going
to leave the unit
unattended for
going out of the
house, etc.
Make connection as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
1.Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
SYSTEM CONTROL IN/System control cord (provided)
CONNECTIONS
DV-K751/S701
Notes
Notes
5
Notes
Notes
6
Remote control unit (DV-S701 U.S.A.)
The remote control unit incorporates the basic operation keys as well as a variety of applied operation keys so that it can be
used in a wide range of purposes.
Use care to store the remote control unit in a safe place so as not to lose it.
Model: RC-D0704
Infrared ray system
1 VIRTUAL SURR. key
2 POWER (ON/STANDBY) key
3 CD, VCD and DVD related control keys
Numeric (0 to 9) keys
CLEAR key
P.MODE key
A-B REPEAT key
REPEAT key
4 CD, VCD and DVD related control keys
Cursor (%, fi, @, #) keys
ENTER key
Pause (8) key
Forward and reverse search (1, ¡) keys
TITLE key
MENU key
RETURN key
ON SCREEN key
Skip down (4) and Skip up (¢) keys
Stop (7) key
Play (3) key
5 TV monitor related control keys
ANGLE key
AUDIO key
SUB TITLE key
MEMORY key
SET UP key
6 CD-TEXT related control keys
TEXT DISPLAY key
ALL INFO. key
TITLE SEARCH key
7 DISPLAY key
8 OPEN/CLOSE (0) key
Remote control unit (DV-K751)
The remote control unit incorporates the basic operation keys as well as a variety of applied operation keys so that it can be
used in a wide range of purposes.
Use care to store the remote control unit in a safe place so as not to lose it.
Model: RC-D0706
Infrared ray system
1 VIRTUAL SURR. key
2 POWER (
) key
3 CD, VCD and DVD related control keys
Numeric (0 to 9) keys
CLEAR key
P.MODE key
A-B REPEAT key
REPEAT key
STEREO key
4 CD, VCD and DVD related control keys
Skip down (4) and Skip up (¢) keys
Stop (7) key
Play (3) key
Cursor (%, fi, @, #) keys
ENTER key
Pause (8) key
Forward and reverse search (1, ¡) keys
TITLE key
MENU key
RETURN key
ON SCREEN key
5 TV monitor related control keys
ANGLE key
AUDIO key
SUB TITLE key
MEMORY key
SET UP key
6 Karaoke-related control keys
KARAOKE key
HIT MASTER key
ASSIST VOCAL key
KARAOKE MODE key
MELODY key
DIGITAL ECHO (fi:Down/%:Up) keys
REQUEST key
Flat (
I
È
) key
Natural ( ) key)
Sharp (#) key
7 DISPLAY key
8 OPEN/CLOSE (0) key
DV-K751/S701
1
2
3
4
5
6
DISPLAY
3
56
8
9
0
7
8
ENTER
ASSIST
VOCAL
DIGITAL ECHO
I
È
OPEN
/CLOSE
0
STEREO
A-B REPEAT
REPEAT
3
ON SCREEN
MEMORY
SET UP
S
i
8
VIRTUAL
POWER
SURR.
12
4
7
CLEAR P.MODE
4¢
TITLE MENU
1¡
RETURN
ANGLE AUDIO SUB TITLE
HIT
KARAOKE
MASTER
KARAOKE
MODE MELODY
REQUEST KEY CONTROL
7
1
2
3
4
5
6
VIRTUAL
DISPLAY
3
56
8
9
0
8
ENTER
¢
7
SUB TITLE
TITLE
SEARCH
/CLOSE
A-B REPEAT
REPEAT
ON SCREEN
SET UP
POWER
SURR.
ON/
STANDBY
12
4
7
CLEAR P.MODE
TITLE MENU
1¡
RETURN
4
ANGLE AUDIO MEMORY
TEXT
ALL INFO.
DISPLAY
CD TEXT
7
OPEN
0
8
3
CONTROLS
Remote control unit (DV-S701 OTHER AREA)
The remote control unit incorporates the basic operation keys as well as a variety of applied operation keys so that it can be
used in a wide range of purposes.
Use care to store the remote control unit in a safe place so as not to lose it.
Model: RC-D0703
Infrared ray system
1 VIRTUAL SURR. key
2 POWER (
) key
3 CD, VCD and DVD related control keys
Numeric (0 to 9) keys
CLEAR key
P.MODE key
A-B REPEAT key
REPEAT key
STEREO key
4 CD, VCD and DVD related control keys
Cursor (%, fi, @, #) keys
ENTER key
Pause (8) key
Forward and reverse search (1, ¡) keys
TITLE key
MENU key
RETURN key
ON SCREEN key
Skip down (4) and Skip up (¢) keys
Stop (7) key
Play (3) key
5 TV monitor related control keys
ANGLE key
AUDIO key
SUB TITLE key
MEMORY key
SET UP key
6 CD-TEXT related control keys
TEXT DISPLAY key
ALL INFO. key
TITLE SEARCH key
7 DISPLAY key
8 OPEN/CLOSE (0) key
1
2
3
4
5
6
VIRTUAL
DISPLAY
3
56
8
9
0
8
ENTER
¢
7
SUB TITLE
TITLE
SEARCH
/CLOSE
STEREO
A-B REPEAT
REPEAT
ON SCREEN
SET UP
SURR.
POWER
12
4
7
CLEAR P.MODE
TITLE MENU
1¡
RETURN
4
ANGLE AUDIO MEMORY
TEXT
ALL INFO.
DISPLAY
CD TEXT
7
OPEN
0
8
CONTROLS
DV-K751/S701
3
7
8
ELECTRIC UNIT
(X25-616X-XX)
(W02-2658-05)
POWER SUPPLY
SWITCHING
(X14-48XX-XX)
DISPLAY UNIT
(X14-48XX-XX) (B/2)
KARAOKE
(X14-48XX-XX)
PROCESSOR UNIT
D.R.I.V.E
DVD CIRCUIT
DVD MECHA.
(D40-1580-05)
DV-S701/DV-K751
D+5V/A+8V/D+8V/M+12V/
A+14V/A-14V/FL-35V
+12V
-12V
SLKCK/CLDCK
DACMUTE/IW0/
EMPH/IW1
SCLK
SRDT
u-COM+5V
D+3.3V/A+5V
M+9V/D+5V/
384fs
POWER
STB/CLK/DATA
MICMUT
ECHOMUT
MIC
ECHO
IEC958
ML/MC/MD
MICMUT
DOUT0
786fs
DACMUTE
BCK/LRCK
MCK
DATA0
DOUT1
DOUT2
Lch
Rch
ZERO0
DACMUTE
MIC IN
BCK
LRCK
DATA
R
L
DATA
MCK
BCK/LRCK
PMUTE
CD-2CH
ECHO
MIC
Lch
Rch
MIXR
MIXL
Rch
Lch
Rch
Lch
MIX L
MIX R
CD-2CH
BCK/LRCK
ML/MC/MD
MCK
DATA1
DACMUTE
ZERO1
SR
SL
SR
SL
ML/MC/MD
BCK/LRCK
MCK
DATA2
DACMUTE
ZERO2
SW
CT
SW
CT
AMUTE
STB
DATA/CK
STB
STB
DATA/CK
SR
SL
SW
CT
NR1/NR2/NR3
DASDATA
DASMC/
DASML/
NR1/
NR2/
NR3
Y
C
ACC. -DRIVE/LD-CONT.
RF/FE/TE/SENS. SW
MIXR
MIXL
SR
CT
SW
SL
SW
CT
SR
SL
Y/C1
Y/C2
COMP
COMP
Y/C2
Y/C1
Y/C2
Y/C1
COMP
SBCK/SUBC/
DQSY/
BCK/LRCK
24bit L
24bit R
FL-35V/D+5V
W02-2662-05 VEP96533C
W02-2661-05 VEP96533B
W02-2660-05 VEP96533A
DVD CIRCUIT MAKER PARTS No.
A+12V
SW1
SW2
KARA CONT1
KARA CONT2
STB
MIC SW
VOICEEDIT
SBUSY
SDATA
1
2
2
1
2
1
3
4
L
RR
L
MIX R
MIX L
FLAC
OP AMP, SURROUND
IC25
DECODER
CD-TEXT
SER.
16BIT
S-RAM
PAR.
IC23
IC26 IC29
u-COM
B
MUTE
MUTE
IC31
E
IC30
Q434
MUTE
Q424,425
DAC
IC3
(1/2)
FILTER
IC18 (1/2)
FILTER
IC18 (2/2)
IC17
IC17
(2/2)
SWITCH
CONTROL
Q500,502
LED
DISPLAY
DRIVER
FL DOT
DISPLAY
FL
IC1 ED2
SENSOR
A1
REMOTE
SWITCH
KEY
MUTE
(2/2)
(1/2)
Q103
33dB
(1/2)
33dB
Q104
MUTE
(2/2)
Q101
C
IC4 (1/2)
FILTER
IC3
DAC
IC5 (1/2)
FILTER
IC4 (2/2) IC5 (2/2)
D.R.I.V.E
24 BIT
IC2
A
F
Q407,409
MUTE
IC8,9
SELECT
MUTE
Q406,408
MUTE
Q403,405
MUTE
Q402,404
IC4
DAC
Q426,427
MUTE
G
IC13 (2/2)
FILTER
IC13 (1/2)
FILTER
IC5
DAC
Q428,429
MUTE
IC11 (1/2)
IC11 (2/2)
FILTER
FILTER
MUTE
CONTROL
Q437,439 Q438,440
MUTE
CONTROL
IC15,16
ADD
IC6
E. VOL
E. VOL
IC7
11.4dB
IC14 (2/2)
IC14 (1/2)
Q411,413
Q410,412
MUTE
MUTE
Q415,417
Q414,416
MUTE
MUTE
IC12 (2/2)
IC12 (1/2)
11.4dB
11.4dB
11.4dB
Q210-213
Q204-208
Q203
Q209,237
FILTER
FILTER
Q236
NR +
6dB
Q200-202
6dB
75 DRIVER
75 DRIVER
75 DRIVER
IC2
Q600,601
IC32
COAX OUT
OPT OUT
1 L
2 R
OUTPUT
ANALOG
2V/510
1 L
2 R
I
1 Lch
2 Rch
3 SL
4 SR
6 SW
5 CT
G
Y/C OUT1
OUTPUT
1Vp-p/75
COMPONENT
2 COMP OUT2
1 COMP OUT1
286mVp-p/
1Vp-p/75
C
75
OUTPUT
Y
S-VIDEO
A+5V
240V
H
MIC1
J101
J102
MIC2
J
-21
COAX
0.5Vp-p/75
OPTICAL
DIGITAL OUTPUT
-15dBm
DV-S701
DESTINATION
COUNTRY
U.S.A.
EUROPE
GENERAL MARKET
M2
U.K.ET
K
YES
ABB.
A, B, F, G, J
DESTINATION
COUNTRY
DVF-K751
CHINA
GENERAL MARKET
C
M
ABB.
AC110V-
2V/510
6ch
OUTPUT
MUTE
CONT.
IC33 (1/2) IC33 (2/2)
SWITCHING
POWER SUPPLY
(W02-2658-X5)
D2,3
IC102
E.VOL
IC101
IC101
P1
IC103
IC103
Q105
DETECT
MIC
D
SDATA
SBUSY
NO
C, D, E
NOHYES
I
YES
NO
A, B, H, I, JNOC, D, E, F, G
YES
YES
NO
1,2
NO
YES
3,4
NO
1-4
MIX OUT
(AUDIO OUT2)
AUDIO
OUT 1
DV-K751/S701
BLOCK DIAGRAM
CIRCUIT DESCRIPTION
PORT#32 PORT#33 PORT#34 PORT#35
VOLTAGE
DV-K751/S701 DV-K751/S701
DV-K751 DV-S701 MODEL NAME
5V
–– – –
DV-K751
4.58V
→(PLAY)
MIC-1 DOWN TEXT DISPLAY (CD-TEXT)
–
DVF-9010
3.75V
7(STOP)
MIC-1 UP ALL INFO. (CD-TEXT)
–
DV-2070
2.92V
(STILL/PAUSE) MIC-2 DOWN TITLE SERCH (CD-TEXT)
–
DVF-K7010
2.08V
(FWD SKIP) MIC-2 UP REPEAT
–
DVF5010
1.25V
(BWD SKIP) FL DISPLAY FL DISPLAY
–
DV-203
0.42V
OPEN/CLOSE POWER POWER
–
DV-S701
0V
Voltage matrix of microprocessor
DV-K751/S701
Note: Please refer to DVF-7010(B51-5456-00) service manual if need the information of
microprocessor and the like.
9
DV-K751/S701
Flate wave
Tangential adjust Tilt adjust
DC OUTPUT
(Bottom view)
FRONT
Minimum
DC level ( 1.6V)
0 [V]
MECHANISM ADJUSTMENT PROCEDURE
ADJUSTMENT
No. ITEM
< 1 >
< 2 >
Note : Adjust to repeat No. < 1 > and < 2 > about 2~3 times by a hexagon driver on the bottom chassis of set,
TANGENTIAL
TILT
then complete No. < 2 >.
: After complete adjustment, confirm to play MD, CD and Video CD disc the correct.
INPUT
SETTING
DV DISC
OUTPUT
SETTING
Connect an oscillo-
scope to TL5206 and
chassis GND
(DVD main unit :
W02-266x-xx)
PLAYER
SETTING
STILL
ALIGNMENT
POINT
Tangential nut
Tilt nut
ALIGN
FOR
Minimum DC level
and flat wave.
(a)
FIG.
(a)
10
WHITE
BURST
BURST
NTSC PAL
1.00V
±0.05Vp-p
1.00V
±0.05Vp-p
NTSC PAL
0.7V
±0.02Vp-p
0.66V
±0.02Vp-p
100% COLOR BAR (oscilloscope) 75% COLOR BAR (oscilloscope)
COLOR BAR (TV)
(b) (c)
CYAN
WHITE
VELLO
CYAN
GREEN
MAGENTA
RED
BLACK
BLUE
MAIN C.B.A
WHITE
VELLO
BLUE
BACK
NTSC
Cb
0.648V
±0.03Vp-p
100% COLOR BAR (oscilloscope)
100% COLOR BAR (oscilloscope)
(d) (d)
CYAN
RED
NTSC
0.648V
±0.03Vp-p
Cr
FP6201
FP5201
P6251
VR3231
VR3233
VR3232
FP4203 FP4201 P4251
FP2501
(COMPONENT SIDE)
DV-K751/S701
ADJUSTMENT
No. ITEM
DVD DISC : 100% and 75% color bar
OUTPUT : Video output (composite or component / RCA PIN)
NTSC
1
2
VIDEO
LEVEL(Y)
VIDEO
LEVEL(C)
VIDEO
3
LEVEL
(Cb) (Cr)
PAL
1
2
VIDEO
LEVEL(Y)
VIDEO
LEVEL(C)
INPUT
SETTING
DISC
100%COLOR
BAR
DISC
75%COLOR
BAR
DISC
100%COLOR
BAR
DISC
100%COLOR
BAR
DISC
75%COLOR
BAR
OUTPUT
SETTING
Connect the TV
monitor and the
oscilloscope
Connect the TV
monitor and the
oscilloscope
Connect the TV
monitor and the
oscilloscope
Connect the TV
monitor and the
oscilloscope
Connect the TV
monitor and the
oscilloscope
DVD
SETTING
STILL
STILL
STILL
STILL
STILL
ALIGNMENT
POINT
VR3232
(MAIN CBA)
VR3233
(MAIN CBA)
VR3231
(MAIN CBA)
VR3232
(MAIN CBA)
VR3233
(MAIN CBA)
ALING FOR FIG.
(WHITE)
1.00V
(b)
±0.05Vp-p
(CYAN)
0.7V
(c)
±0.02Vp-p
(Cb) (Cr)
0.648V
(d)
±0.03Vp-p
(WHITE)
1.00V
(b)
±0.05Vp-p
(CYAN)
0.66V
(c)
±0.02Vp-p
11