KENWOOD DV-R5060 User Manual

MULTIPLE DVD/VCD/CD PLAYER

DV-605 DVF-R5060

INSTRUCTION MANUAL

B60-5265-08 01 (K/P/E/T/X/Y) AP 02/02

Introduction

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Before applying power

Units are designed for operation as follows.

U.S.A. and Canada .........................................................AC 120V only Other countries ........................................................... AC 110 - 240 V

Caution : Read this page carefully to ensure safe operation.

For the United Kingdom

Factory fitted moulded mains plug

1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the moulded plug.

3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home

Preparations

or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:

Blue : Neutral Brown : Live

Do not connect those leads to the earth terminal of a threepin plug.

Safety precautions

Caution : Read this page carefully to ensure safe operation.

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The marking of products using lasers

(For countries other than U.S.A., U.S.-Military and Canada)

CLASS 1

LASER PRODUCT

The marking this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product. Location: Back panel

Introduction

Unpacking

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Unpack the unit carefully and make sure that all the accessories are present. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Please confirm that the following accessories are present.

Audio video cord (Red, White, Yellow) ...(1)

Coaxial cable ...(1)

Remote control unit ...(1)

*AC plug adaptor ...(1)

* Use to adapt the plug on the power cord to the

shape of the wall outlet. (Accessory only for regions where use is nec- essary.)

Batteries(R6/AA) ...(2)

Preparations

For the U.S.A.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser product safety.

KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI, TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS NO. 21 CFR

1040.10, CHAPTER 1, SUBCHAPTER J.

Location: Back Panel

CAUTION- LASER RADIATION WHEN OPEN.

Location: Laser Pick-up Unit Cover inside this product

DO NOT STARE INTO BEAM.

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change

or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– – Reorient or relocate the receiving antenna. – – Increase the separation between the equipment and receiver. – – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – – Consult the dealer or an experienced radio / TV technician for help.

IMPORTANT SAFEGUARDS

Caution : Read this page carefully to ensure safe operation.

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.

1. Power sources – The appliance should be connected to a

power supply only of the type described in the instruction manual or as marked on the appliance. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For appliances intended to operate from battery power, or other sources, refer to the instruction manual.

2. Power-cord protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Preparations

Never pull or stretch the cord.

CAUTION – Polarization – This appliance may be

equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

4. Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The appliance should be situated so that its location or position does not interfere with its proper ventilation. To maintain good ventilation, do not put records or a tablecloth on the appliance. Place the appliance at least 10 cm away from the walls. Do not use the appliance on a bed, sofa, rug or similar surface that may block the ventilation openings. This appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Temperature – The appliance may not function properly if

used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5°C (41°F).

7. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Do not place a flaming object, such as a candle or lantern, on or near the appliance.

8. Electric shock – Care should be taken so that objects do

not fall and liquid is not spilled into the enclosure through openings. If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this appliance.

9. Enclosure removal – Never remove the enclosure. If the

internal parts are touched accidentally, a serious electric shock might occur.

10.Magnetic fields – Keep the appliance away from sources

of magnetic fields such as TV sets, speaker systems, radios, motorized toys or magnetized objects.

11.Cleaning – Unplug this appliance from the wall outlet

before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

12.Accessories – Do not place this appliance on an unstable

cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

5. Water and moisture –

dripping and splashing - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Do not place an object containing liquid, such as a flower vase, on the appliance.

The appliance shall not be exposed to

IMPORTANT SAFEGUARDS

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

13.Lightning

– For added protection for this appliance during

a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

14.Abnormal smell – If an abnormal smell or smoke is

detected, immediately turn the power OFF and unplug the appliance from the wall outlet. Contact your dealer or nearest service center.

POWER OFF!

15.Damage requiring service – The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the

appliance.

C. The appliance has been exposed to rain or water. D. The appliance does not appear to operate normally by

following the instruction manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation. E. The appliance has been dropped, or the enclosure damaged.

F. The appliance exhibits a marked change in performance.

16.Servicing – The user should not attempt to service the

appliance beyond that described in the instruction manual. All other servicing should be referred to qualified service personnel.

17.Outdoor antenna grounding– If an outside antenna is

connected to the appliance, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electrical Code ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure.

18.Power lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

19. AC outlets – Do not connect other audio equipment with

a power consumption larger than that specified to the AC outlet on the rear panel. Never connect other electrical appliances, such as an iron or toaster, to it to prevent fire or electric shock.

Preparations

20. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

21. Attachment – Do not use attachments not recommended

by the appliance manufacturer as they may cause hazards.

22. Replacement parts – When replacement parts are required,

be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23. Safety check – Upon completion of any service or repairs

to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRIC SERVICE EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

ELECTRICAL CODE

GROUND CLAMPS

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMP

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

Notes:

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with antenna terminals.

3. Item 17 complies with UL in the U.S.A.

Special features and Contents

Special features

This document classifies the applications of each feature using the following marks.

: Description of a feature that can be used with DVD.

DVD

: Description of a feature that can be used with CD.

: Description of a feature that can be used with VCD.

VCD

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Preparations

Contents

DVD

VCD

DVD

Higher video quality than S-VHS video and LaserDisc

Higher audio quality than music CD

Graphical user interface (GUI) compatibility

Versatile DVD playback features

DTS digital output compatibility

Caution : Read the pages marked carefully to ensure safe operation.

Preparations

Introduction......................................................................................... 2

Before applying power .................................................................. 2

Safety precautions .......................................................................... 2

IMPORTANT SAFEGUARDS ...................................................... 4

Special features and Contents ........................................................ 6

Special features ...................................................................................... 6

Contents ..................................................................................................... 6

Discs information .............................................................................. 7

Types of playable discs ......................................................................... 7

Unplayable discs .....................................................................................7

Icons on the DVD VIDEO discs ............................................................. 7

Region Codes ...................................................................................... 8

Region codes in the world .................................................................... 8

Video formats...................................................................................... 9

Important items ................................................................................ 10

Maintenance .......................................................................................... 10

Reference ................................................................................................10

System Connections ........................................................................ 11

Connecting to a TV with video (composite) input terminal ......... 11

Connecting to a TV with S-video input terminal ............................ 11

Connecting to a TV with SCART input terminal

(For Europe and U.K.) ........................................................................ 11

Connecting to a TV with Component input terminals

(For other countries) ......................................................................... 12

Connecting to an Audio component .................................................. 12

Controls and indicators .................................................................. 13

Operation of remote control unit .................................................. 14

Operations

Playback of disc .............................................................................. 16

Basic play ............................................................................................... 16

Disc playback features ........................................................................ 17

Using the On-screen banner display ........................................... 19

Selecting a Title .................................................................................... 20

Selecting a Chapter or Track .............................................................. 20

Select Audio Language ........................................................................21

Select Subtitle Language .................................................................... 21

Select Camera angle ............................................................................ 22

Using IntroScan function .....................................................................22

Using Bookmarks .................................................................................. 23

Repeat play ............................................................................................. 24

A-B Repeat play .....................................................................................24

Random play ........................................................................................... 25

Program play..................................................................................... 26

Set Up functions ............................................................................... 28

Set up menu ............................................................................................ 28

Select Audio Language ........................................................................29

Select Subtitle Language .................................................................... 29

Select Menu Language ........................................................................ 30

Select Rating .......................................................................................... 30

Password ................................................................................................ 31

TV aspect ................................................................................................. 33

Dynamic Range ...................................................................................... 34

Digital Audio Out ................................................................................... 34

Linear PCM ............................................................................................. 35

Menu playback................................................................................. 36

Hierarchical structure of VCD menus ...............................................36

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ..... 37

Selecting the Audio channel .............................................................. 37

MP3 function..................................................................................... 38

Guidance of MP3 ................................................................................... 38

Playing back MP3 ................................................................................. 39

Selecting MP3 files .............................................................................. 40

MP3 Repeat play .................................................................................... 41

MP3 Random play .................................................................................. 41

MP3 program playback ........................................................................ 42

DVD menu language code list ....................................................... 43

Knowledge

In case of difficulty.......................................................................... 44

Specifications .................................................................................. 46

Discs information

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Types of playable discs

The system using this unit does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts.

Playable Disc

Logo mark on disc

Disc size

Played sides

Contents

Video + Audio

Audio

Approx. 41 min.

(1 side, 1 layer)

Approx. 75 min.

(1 side, 2 layers)

Approx. 82 min.

(2 sides, 1 layer)

Approx. 150 min.

(2 sides, 2 layers)

DVD VIDEO CD (CD-R, CD-RW)

8cm

One or both One or both

Approx. 133 min.

Approx. 242 min.

Approx. 266 min.

Approx. 484 min.

12cm

(1 side, 1 layer)

(1 side, 2 layers)

(2 sides, 1 layer)

(2 sides, 2 layers)

8cm

One side only One side only

Max. 20 min., digital Max. 74 min., digital

MP3 media that can be played back with this equipment (CD-R, CD-RW) °

12cm

VCD

Preparations

12cm

One side only

Max. 74 min.

Unplayable discs

This player cannot play back any of the following discs.

DVD AUDIO discs DVD-ROM discs DVD-R/DVD-RAM/DVD-RW discs CD-ROM discs (Except MP3 disc [ ISO 9660 level 1]) VSD discs

÷ A DVD VIDEO disc with a region code which does not match this unit or without a region code. For details, see "Region

Codes". 8

÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video

Formats". 9

÷ This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording conditions, etc.

S-VCD discs CDV discs (Only the audio part can be reproduced.) CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced.) Photo CD discs (Never attempt to play them.)

Icons on the DVD VIDEO discs

Icon Description

Indicates the region code where the disc can be played.

Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages)

Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of subtitle languages. (Max. 32 languages)

Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max. 9 angles)

Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan. •‹ In the example on the left, the 16:9 video can be converted into letter box video.

Region Codes

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Every player of this model has a certain region code assigned to it based on the country where the player is used. When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region codes matching the region code of the player. The region code for this player is described on the rear panel of the player.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.

Preparations

Professional use disc (Air Line cabin service)

Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below. Even when a DVD VIDEO disc does not carry any indication of the region code, it may sometimes unable to be played on this player due to certain restrictions.

Restrictions due to difference between discs

Some DVD and VCD discs can be played only in certain playback modes according to the intentions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the TV screen connected to the player, it indicates that the disc being played is under the restriction as described above.

Inhibition icon

Video formats

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL).

They are variable depending on countries and areas.

TV formats of major countries

TV Format

NTSC

PAL

Major Countries & Areas

Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc.

China, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc.

(For U.S.A. , Canada and U.S. Military )

This unit reproduces NTSC discs in NTSC format. (This unit can not play PAL discs.)

(For other countries)

This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format.

÷ If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the

disc according to the TV set in use (country and area).

Checking the Video Format

Check the video format of the VCD and DVD discs to be played on the player as described below.

1 Check if the video formats of the TV to be used and

disc to be played match each other.

÷ For details, refer to the instructions provided with the

TV and disc.

When the video formats are different :

Try playing the disc. If the video formats of the disc and TV do not match, the played video may be black and white or become as shown below.

Preparations

2 When the TV is switchable between NTSC and PAL,

set the TV format according to the disc format.

TV Format Playable Disc Format

NTSC only

PAL only

NTSC/PAL switchable

÷ Correct video cannot be reproduced if the video formats of the

TV and disc do not match.

NTSC

PAL

NTSC/PAL

Top and bottom edges are not displayed.

Top and bottom areas are dark.

Picture turbulence due to sync unmatching.

Important items

Maintenance

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Maintenance of the unit

When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration.

Reference

Disc handling precautions

Handling

Hold the disc so that you do not touch the

Preparations

Sticker

Sticky paste

playing surface.

Label side

Playing side

Do not attach paper or tape to either the playing side or the label side of the disc.

In regard to contact cleaner

Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player. Therefore,

to avoid danger, never use a cracked or deformed disc or a disc repaired

with tape or adhesive agent. Please do not use discs which are not

round because they may cause malfunction.

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring, etc.)

which are marketed for improving the sound quality or protecting discs

as well as the disc cleaner should not be used with this system because

they may cause malfunction.

Cleaning

If there are fingerprint marks or foreign matter

found on the disc, lightly wipe the disc with a

soft cotton cloth (or similar) from the center of

the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long pe-

riod of time, remove it from the player and

store it in its case.

Note related to transportation and movement

Before transporting or moving this unit, carry out the following operations.

1. Set the POWER ON/OFF switch to the ON without loading a disc.

2. Wait a few seconds and verify that the display shown appears.

3. Set the POWER ON/OFF switch to OFF.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great

difference in temperature between this unit and the outside. This unit

may not function properly if condensation occurs. In this case, leave

the unit for a few hours and restart the operation after the condensa-

tion has dried up.

Be specially cautious against condensation in the following circum-

stances:

When this unit is carried from one place to another across a large

difference in temperature, when the humidity in the room where

this unit is installed increases, etc.

System Connections

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components.

Caution:

Do not plug in the power lead until all connections are completed.

Caution

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

÷ Do not place any objects impairing heat radiation onto the top of the unit. ÷ Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.

Top panel : 50 cm Side pannel : 10 cm Back panel : 10 cm

Connecting to a TV with video (composite) input terminal

(For Europe and U.K.) (For other countries)

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer

referring to "In case of difficulty". r

Preparations

VIDEO

AUDIO

OUTPUT

OPTICALCOAXIAL

OUTPUT

S-VIDEO

Connecting to a TV with S-video input terminal

(For Europe and U.K.) (For other countries)

VIDEO

AUDIO

OUTPUT

OPTICALCOAXIAL

S-video cord

Audio cord

OUTPUT

S-VIDEO

Audio video cordAudio video cord

Audio cord

S-video cord

COMPONENT VIDEO OUTPUT

VIDEO

OUTPUT

S-VIDEO

VIDEO

OUTPUT

S-VIDEO

OUTPUT

AUDIO

OPTICALCOAXIAL

Connecting to a TV with SCART input terminal

VIDEO

SCART cable

OUTPUT

S-VIDEO

AUDIO

OUTPUT

(For Europe and U.K.)

OPTICALCOAXIAL

AUDIO

OUTPUT

VIDEO

OUTPUT

S-VIDEO

OPTICALCOAXIAL

COMPONENT VIDEO OUTPUT

System Connections

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Connecting to a TV with Component input terminals

Component cords

Audio cord

Preparations

Connecting to an Audio component

(For other countries)

[ For U.S.A. and Canada ]

Select the scanning method of the Component Video output using the COMPONENT VIDEO OUTPUT switch on the rear panel.

INTERLACE: Scanning method is fixed at in-

terlaced scanning.

PROGRESSIVE: When progressive scanning

is unavailable with certain discs, the scanning method is switched automatically to interlaced scanning. When the scanning method is changed, the scanning status will be displayed for a few seconds.

(For Europe and U.K.)

AV receiver or Amplifier

Video cord or S-video cord

Audio cord

Coaxial or Optical cable

AV receiver or Amplifier

Video cord, S-video cord or Component cords

(For other countries)

COMPONENT VIDEO OUTPUT

VIDEO

OUTPUT

S-VIDEO

VIDEO

OUTPUT

S-VIDEO

AUDIO

OUTPUT

AUDIO

OUTPUT

OPTICALCOAXIAL

1. In case an associated system component is connected, also read the instruction manual of the component.

Notes

2. Insert the optical-fiber cable straight into the connector until it clicks.

3. Never bend or bundle the optical-fiber cable.

Audio cord

Coaxial or Optical cable

Controls and indicators

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

PLAY/PAUSE indicator

PROGRAM indicator INTRO SCAN indicator P.B.C. indicator

POWER

TITLE indicator CHAPTER indicator TRACK indicator HOUR indicator MINUTE indicator SECOND indicator

Display

DISC NUMBER indicators

Character information display section

DISC SKIP DISC 1 DISC 2 DISC 3 DISC 4

4¢

PARENTAL LOCK indicator REPEAT indicators

REPEAT REPEAT 1 DISC REPEAT ALL DISCS REPEAT A-B

RANDOM indicator

Preparations

SEQ. MODE indicator CD indicator DVD indicator VCD indicator MP3 indicator

DISC 5

ON OFF

1 POWER ON / OFF switch ^ 2 Disc tray ^ 3 DISC SKIP key * 4 4 (PREV.), ¢(NEXT) (Skip) keys

5 DISC 1 ~ DISC 5 keys/indicators *

DIMMER function

The display brightness of the main unit can be changed.

DIMMER

SEQUENCE MODE

6 6 (Play/Pause) key ^ 7 7 (Stop) key ^ 8 0 (Open/Close) key ^ 9 SEQUENCE MODE key *

Switching as shown below is done each time the DIMMER key on the remote control is pressed.

1 Dim 2 Not lit 3 Bright

Operation of remote control unit

The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit.

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

2 3

4 5

7 8

Preparations

9 0

DISC

123

DISC

456

789

DISC SKIP

SHIFT

SUBTITLE

MULTI CONTROL

P.MODE

RANDOM

SLOW

1¡4¢

REPEAT

A-B

DIMMER

ON SCREEN

SEQ. MODE

TOP MENU

AUDIO

CLEAR

ANGLE

ON/OFF

RETURN ENTER

STEP

@ # $ % ^

1 Numeric keys ) 2 CLEAR key ( 3 DISC SKIP key ^* 4 SHIFT key * 5 SUBTITLE key ¡

(SUBTITLE) ON/OFF key

6 Cursor Up (5), Down (∞),

Left (2) and Right (3) keys

(,•

7 P.MODE key §

RANDOM key ∞

8 SLOW (Back slow/

Forward slow) keys & STEP (Back step/ Forward step) keys &

9 1 key/¡ key (Search

key) & 4 (PREV.) key/¢ (NEXT) key (Skip key)&

0 REPEAT key ¢

A-B Repeat key ¢

! DIMMER key # @ MENU key • # ON SCREEN key ( $ TOP MENU key ^,‡ % AUDIO key ¡,‡ ^ ANGLE key ™ & RETURN key •

ENTER key (

* 7 (Stop) key ^

6 (Play/Pause) key ^

Model : RC-D0308 (Infrared ray system)

Loading batteries

1 Remove the cover.

2 Insert batteries.

÷ Insert two R6/LR6 (“AA”-size) batteries

following the polarity indications.

Operation

Insert the power plug into a power outlet, press the POWER ON/OFF switch of the main unit to ON, then press the desired remote control key.

3 Close the cover.

Remote sensor

÷ When pressing more than one remote control keys succes-

sively, press the keys securely by leaving an interval of 1 second or more between pressing of keys.

1. The provided batteries are intended for use in operation checking, and their service life may be short.

Notes

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Operating range (approx.)

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Preparations

+ 34 hidden pages