Kenwood DVF-505 User Manual
MULTIPLE DVD / VCD / CD PLAYER
DVF-R4050
DVF-505
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5088-08 00 (K/E/T/Y/X) OC 01/03
COMPACT
DIGITAL VIDEODIGITAL VIDEO
2
Introduction
DV-505/DVF-R4050 (EN)
Before applying power
Units are designed for operation as follows.
U.S.A. and Canada ....................................................... AC 120V only
Australia ....................................................................... AC 240 V only
Preparations
Caution : Read this page carefully to ensure safe operation.
Europe and U.K. ............................................................ AC 230V only
*Other countries .................... AC 110-120 / 220-240 V switchable
Safety precautions
Caution : Read this page carefully to ensure safe operation.
WARNING :TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The marking is located on the rear panel and says that
the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser
beams that are of a weaker class. There is no danger of
hazardous radiation outside the unit.
Introduction
Unpacking
DV-505/DVF-R4050 (EN)
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company
receiving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Accessories
Please confirm that the following accessories are present.
Audio video cord (Red, White, Yellow) .......... (1) Batteries (R6/AA) ............... (2)
Coaxial cable ......................... (1)
Remote control unit ............ (1)
3
Preparations
4
IMPORTANT SAFEGUARDS
Caution : Read this page carefully to ensure
safe operation.
DV-505/DVF-R4050 (EN)
Please read all of the safety and operating instructions
before operating this appliance. Adhere to all warnings on
the appliance and in the instruction manual. Follow all the
safety and operating instructions. These safety and
operating instructions should be retained for future
reference.
1. Power sources – The appliance should be connected to
a power supply only of the type described in the instruction
manual or as marked on the appliance. If you are not sure
of the type of power supply to your home, consult your
appliance dealer or local power company. For appliances
intended to operate from battery power, or other sources,
refer to the instruction manual.
2. Power-cord protection – Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
Preparations
appliance.
CAUTION – Polarization – This appliance may
3.
be equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
4. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of
the appliance and to protect it from overheating, and these
openings must not be blocked or covered. The appliance
should be situated so that its location or position does not
interfere with its proper ventilation.
To maintain good ventilation, do not put records or a tablecloth on the appliance. Place the appliance at least 10 cm
away from the walls.
Do not use the appliance on a bed, sofa, rug or similar
surface that may block the ventilation openings. This
appliance should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
6. Temperature – The appliance may not function
properly if used at extremely low, or freezing
temperatures. The ideal ambient temperature is
above +5°C (41°F).
7. Heat – The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
8. Electric shock – Care should be taken so that objects
do not fall and liquid is not spilled into the enclosure
through openings. If a metal objects, such as a hair
pin or a needle, comes into contact with the inside of
this appliance, a dangerous electric shock may result.
For families with children, never permit children to
put anything, especially metal, inside this appliance.
9. Enclosure removal – Never remove the enclosure.
If the internal parts are touched accidentally, a serious
electric shock might occur.
10.Magnetic fields – Keep the appliance away from
sources of magnetic fields such as TV sets, speaker
systems, radios, motorized toys or magnetized
objects.
11.Cleaning – Unplug this appliance from the wall
outlet before cleaning. Do not use volatile solvents
such as alcohol, paint thinner, gasoline, or benzine,
etc. to clean the cabinet. Use a clean dry cloth.
12.Accessories – Do not place this appliance on an unstable
cart, stand, tripod, bracket, or table. The appliance may fall,
causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer,
or sold with the appliance. Any mounting of the appliance
should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should
be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Water and moisture – The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
IMPORTANT SAFEGUARDS
DV-505/DVF-R4050 (EN)
5
13.Lightning – For added protection for this appliance during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the appliance due to lightning and power-line
surges.
14.Abnormal smell – If an abnormal smell or smoke is
detected, immediately turn the power OFF and unplug
the appliance from the wall outlet. Contact your dealer or
nearest service center.
POWER OFF!
15.Damage requiring service – The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged.
B. Objects have fallen, or liquid has been spilled into
the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally
by following the instruction manual. Adjust only those
controls that are covered by the instruction manual as an
improper adjustment of other controls may result in damage
and will often require extensive work by a qualified
technician to restore the appliance to its normal operation.
E. The appliance has been dropped, or the enclosure
damaged.
F. The appliance exhibits a marked change in performance.
16.Servicing – The user should not attempt to service
the appliance beyond that described in the instruction
manual. All other servicing should be referred to
qualified service personnel.
17.Outdoor antenna grounding – If an outside antenna
is connected to the appliance, be sure the antenna
system is grounded so as to provide some protection
against voltage surges and built up static charges.
Article 810 of the National Electrical Code ANSI/
NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Figure.
18.Power lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
19.AC outlets – Do not connect other audio equipment
with a power consumption larger than that specified
to the AC outlet on the rear panel. Never connect
other electrical appliances, such as an iron or toaster,
to it to prevent fire or electric shock.
Preparations
20. Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
21. Attachment – Do not use attachments not recommended
by the appliance manufacturer as they may cause hazards.
22. Replacement parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original parts. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
23. Safety check – Upon completion of any service or repairs
to this appliance, ask the service technician to perform
safety checks to determine that the appliance is in proper
operating condition.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
ELECTRICAL CODE
GROUND
CLAMPS
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
Notes:
1. Item 3 is not required except for grounded or polarized equipment.
2. Item 17 and 18 are not required except for units provided with
antenna terminals.
3. Item 17 complies with UL in the U.S.A.
6
Special features and Contents
Special features
This document classifies the applications of each feature using the following marks
: Description of a feature that can be used with DVD.
DVD
: Description of a feature that can be used with CD.
CD
: Description of a feature that can be used with VCD.
VCD
DVD
Higher video quality than S-VHS video and LaserDisc
DVD
Higher audio quality than music CD
CD VCD
Preparations
DVD
DVD
Graphical user interface (GUI) compatibility
DVD
Versatile DVD playback features
CD
DTS digital output compatibility
DV-505/DVF-R4050 (EN)
Contents
Caution : Read the pages marked carefully to ensure safe operation.
Preparations
Introduction ...................................................................................... 2
Before applying power .................................................................... 2
Safety precautions ............................................................................2
IMPORTANT SAFEGUARDS ...................................................... 4
Special features and Contents ..................................................... 6
Special features ..................................................................................... 6
Contents ................................................................................................... 6
Discs information ............................................................................ 7
Types of playable discs ......................................................................... 7
Unplayable discs ....................................................................................7
Icons on the DVD discs ......................................................................... 7
Region codes ................................................................................... 8
Region codes in the world.................................................................... 8
Examples of TV screen display of each video format ..................... 8
Video formats ................................................................................... 9
Video formats of DVD discs that can be played on this unit .......... 9
Region code table .................................................................................. 9
Important items.............................................................................. 10
Maintenance ......................................................................................... 10
Reference............................................................................................... 10
System Connections ..................................................................... 11
Connecting to a TV with video (composite) input terminal ..........11
Connecting to a TV with S-video input terminal ............................ 11
Connecting to a TV with SCART input terminals (For Europe and
U.K.)..................................................................................................... 11
Connecting to a TV with Component input terminals (For other
countries)........................................................................................... 12
Connecting to an Audio component ................................................. 12
Controls and indicators................................................................ 13
Operation of remote control unit ................................................ 14
Selecting a Chapter or Track ............................................................. 19
Changing the Audio Language ...........................................................20
Changing the Subtitle Language ....................................................... 20
Changing the Camera angle ............................................................... 21
Using IntroScan function .................................................................... 21
Using Bookmarks ................................................................................. 22
Repeat play ............................................................................................23
A-B Repeat play ....................................................................................23
Random play ..........................................................................................24
Program play .................................................................................. 25
Set Up functions ............................................................................ 27
Set up menu ...........................................................................................27
Select Audio Language ....................................................................... 28
Select Subtitle Language.................................................................... 28
Select Menu Language ....................................................................... 29
Select Rating .........................................................................................29
Password ............................................................................................... 30
TV aspect ............................................................................................... 32
Dynamic Range .....................................................................................33
Digital Audio Out .................................................................................. 33
Linear PCM ............................................................................................ 34
Menu playback .............................................................................. 34
Hierarchical structure of VCD menus............................................... 34
Playback without using the menu playback function
(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ........... 35
Selecting the Audio channel ............................................................. 35
MP3 function .................................................................................. 36
Guidance of MP3 .................................................................................. 36
MP3 On-screen display .......................................................................37
Playing back MP3 ................................................................................ 37
Selecting MP3 files or folders ........................................................... 38
MP3 program playback ....................................................................... 39
Operations
Playback of disc ............................................................................ 15
Basic play .............................................................................................. 15
Disc playback features ....................................................................... 16
Playing discs by changing them........................................................ 17
Playing from the selected disc .......................................................... 17
Switching sequential play mode ..................................................... 17
Using the On-screen banner display......................................... 18
Selecting a Title.................................................................................... 19
Knowledge
Knowledge ..................................................................................... 39
DVD menu language code list ........................................................... 40
DIMMER function ................................................................................. 40
In case of difficulty ....................................................................... 41
Specifications................................................................................ 43
Discs information
DV-505/DVF-R4050 (EN)
Types of playable discs
The system using this unit does not only play music from CD but can also play the discs listed below to offer you
high-quality entertainment of video of movies and live concerts.
7
Playable Disc
Logo mark on disc
Disc size
Played sides
Contents
Video + Audio
Audio
DVD CD
8cm
One or both One or both
Approx. 41 min.
(1 side, 1 layer)
Approx. 75 min.
(1 side, 2 layers)
Approx. 82 min.
(2 sides, 1 layer)
Approx. 150 min.
(2 sides, 2 layers)
Approx. 133 min.
(1 side, 1 layer)
Approx. 242 min.
(1 side, 2 layers)
Approx. 266 min.
(2 sides, 1 layer)
Approx. 484 min.
(2 sides, 2 layers)
12cm
8cm
One side only One side only
Max. 20 min., digital Max. 74 min., digital
12cm
VCD
COMPACTCOMPACT
DIGITAL VIDEODIGITAL VIDEO
Preparations
12cm
One side only
Max. 74 min.
Unplayable discs
This player cannot play back any of the following discs.
÷ DVD-ROM discs
÷ DVD-R/DVD-RAM/DVD-RW discs
÷ CD-ROM discs
÷ VSD discs
÷ CDV discs (Only the audio part can be reproduced.)
Icons on the DVD discs
Icon Description
ALL
8
32
9
Indicates the region code where the disc can be played.
Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages.
(Max. 8 languages)
Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of subtitle
languages. (Max. 32 languages)
Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max. 9 angles)
÷ CD-G/CD-EG/CD-EXTRA discs (Only the audio can be
reproduced.)
÷ Photo CD discs (Never attempt to play them.)
÷ S-VCD discs
16:9 LB
Aspect ratios that can be selected. “LB” stands for Letter Box and “PS” for Pan/Scan. In the example on the left, the 16:9 video
can be converted into letter box video.
8
Region codes
DV-505/DVF-R4050 (EN)
Every player of this model has a certain region code assigned to it based on the country where the player is used.
When the player is used to play back DVD discs, it can only play the DVD discs carrying the region codes matching
the region code of the player.
The region code for this player is described on the rear panel of the player.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the following
map.
Preparations
1
5
2
1
6
2
3
4
1
5
2
4
Examples of TV screen display of each video format
When your TV is switchable between PAL/
NTSC
Try play a disc. If the picture is black and white or as shown on the right,
stop playback and switch the screen display formats of this unit and the
TV to another format. This will improve the played picture quality.
When your TV is compatible only with the
PAL format
With certain discs, the playback picture may have black spaces above
and below it (as shown on the right).
This is because the disc has been
recorded in the NTSC format. The
screen may be somewhat hard to
see but this is not malfunction.
When your TV is compatible only with the
NTSC format
With certain discs, the playback picture may be cut above and below it
(as shown on the right). This is because the disc has been recorded in
the PAL format. The screen may be
somewhat hard to see but this is not
malfunction.
Video formats
3
9
DV-505/DVF-R4050 (EN)
The video signals used to display TV pictures and video
TV formats of major countries
disc pictures are mainly based on two types of signal
formats (PAL and NTSC), which are assigned to each
country or area as shown on the right. As a result, it is
required to select discs according to the video format
used with your TV monitor (in your country or area).
TV Format
NTSC
PAL
Japan, Taiwan, Korea, U.S.A., Canada, Mexico,
Philippines, Chile, etc.
China, North Korea, U.K., Germany, Australia,
New Zealand, Kuwait, Singapore, etc.
Major Countries & Areas
Video formats of DVD discs that can be played on this unit
Set the video formats of the DVD discs to be played on this unit as described below.
Check the video format(s) used by your TV monitor.
1
÷Refer to the operating instructions of your TV monitor for details.
Select DVD discs recorded with the playable video format by referring to the following table.
2
÷See the region code table on the bottom of this page for details on districts 1 to 6.
Your TV
format
District 1
District 2-1
District 2-2
District 2-3
Playable Disc Formats
District 3
District 4-1
District 4-2
District 5
Preparations
District 6
NTSC only
PAL only
NTSC/PAL
switchable
Normal video may not be reproduced when a disc recorded with the video format marked * in the above table is played. See “Examples of TV
Note
Note
screen display of each video format” for details.
When your TV is switchable between NTSC and PAL,
3
÷Districts 1, 2-2 and 4-2: Set the TV to NTSC.
÷Districts 2-1, 4-1 and 5: Set the TV to PAL.
÷Districts 2-3, 3 and 6: Set the TV according to each disc to be played.
NTSC
NTSC*
NTSC
NTSC*
PAL*
NTSC
PAL
NTSC
PAL
NTSC
NTSC*
NTSC
NTSC
PAL*
NTSC*
PAL
NTSC
PAL
NTSC
PAL*
NTSC*
NTSC
Region code table
Area or
Country
Name,
Region
Code
District 1
North
America
1
District 2-1
Europe
2 2
District 2-2
Japan
District 2-3
Middle East
2
District 3
Southeast
PAL
PAL
Asia
NTSC*
PAL*
NTSC
PAL
NTSC
PAL
District 4-1
Oceania
4 4
NTSC
NTSC*
NTSC
District 4-2
South
America
NTSC*
PAL*
NTSC
PAL
NTSC
PAL
District 5
Russia
5
NTSC
PAL*
NTSC*
PAL
NTSC
PAL
8
District 6
China
6
Restrictions due to difference between discs
Some DVD discs can be played only in certain playback modes according to the intentions of the software
producers. As this player plays discs according to their intentions, some functions may not work as
intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon
is displayed on the TV screen connected to the player, it indicates that the disc being played is under the
restriction as described above.
Inhibition icon
10
Important items
Maintenance
DV-505/DVF-R4050 (EN)
Cleaning
Unplug this appliance from the wall outlet before cleaning. Do not
use volatile solvents such as alcohol, paint thinner, gasoline, or
benzine, etc. to clean the cabinet. Use a clean dry cloth.
Reference
Disc handling precautions
Handling
Preparations
Sticker
Sticky paste
Hold the discs so that you do not touch the
playing surface.
Label side
Playing side
Do not attach paper or tape to either the playing side or the label side of the discs.
Caution against contact revitalizer
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic component.
Never play a cracked or warped disc
During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed disc or a
disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they may cause a
malfunction.
Disc accessories
The disc accessories (stabilizer, protection sheet, protection ring, etc.)
which are marketed for improving the sound quality or protecting discs
as well as the disc cleaner should not be used with this system because
they may cause malfunction.
Cleaning
If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with
a soft cotton cloth (or similar) from the center
of the disc outwards in a radial manner.
Storage
When a disc is not to be played for a long
period of time, remove it from the player and
store it in its case.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
1. Set the POWER key to ON without loading a disc.
2. Wait a few seconds and verify that the display
shown appears.
3. Set the POWER key to OFF.
Beware of condensation
When the difference between the internal temperature of the
unit and external atmosphere is large, dew (mist) may be produced on the internal parts of the unit. In such a case, turn the
unit ON and leave it for a few hours until the condensation has
dried up.
Be especially careful in the following conditions:
When the unit is brought into a place where there is a large
difference in temperature between the previous location, when
the humidity of the listening room is high, etc.
System Connections
DV-505/DVF-R4050 (EN)
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution:
Do not plug in the power lead until all connections are completed.
Except for U.S.A. and Canada
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
Connecting to a TV with video (composite) input terminal
Malfunction of microcomputer
If operation is not possible or erroneous display appears even though all connections
have been made properly, reset the microcomputer referring to “In case of difficulty”.
q
11
Preparations
TV
(For Europe and U.K.)
Audio cord and video cord
VIDEO
AUDIO
AV
OUTPUT
S-VIDEO
OPTICALCOAXIAL
OUTPUT
L
R
TV
(For other countries)
Audio cord and video cord
Connecting to a TV with S-video input terminal
TV
(For Europe and U.K.)
AV
OUTPUT
S-VIDEO
VIDEO
AUDIO
OPTICALCOAXIAL
OUTPUT
L
R
TV
(For other countries)
OPTICAL COAXIAL
OPTICAL COAXIAL
AUDIO
OUTPUT
OUTPUT
COMPONENT
VIDEO OUTPUT
Cr
VIDEO
AUDIO
OUTPUT
Cb
L
Y
R
S-VIDEO
COMPONENT
VIDEO OUTPUT
Cr
VIDEO
OUTPUT
Cb
L
Y
R
S-VIDEO
S-video cord
Audio cord
Connecting to a TV with SCART input terminal
Audio cord
S-video cord
(For Europe and U.K.)
TV
VIDEO
AUDIO
COAXIAL
OUTPUT
S-VIDEO
OUTPUT
L
R
AV
12
System Connections
DV-505/DVF-R4050 (EN)
Connecting to a TV with Component input terminals
TV
OPTICAL COAXIAL
OUTPUT
OUTPUT
Cb
L
Y
R
S-VIDEO
COMPONENT
VIDEO OUTPUT
Cr
VIDEO
AUDIO
Audio cord
Video cords
Connecting to an Audio component
Preparations
TV
(For Europe and U.K.)
(For other countries)
AV receiver or Amplifier
Video cord, S-video cord
Audio cord
Coaxial or Optical cable
TV
AV receiver or Amplifier
VIDEO
AV
OUTPUT
S-VIDEO
(For other countries)
AUDIO
OPTICAL COAXIAL
OUTPUT
OUTPUT
L
R
L
R
AUDIO
VIDEO
OUTPUT
S-VIDEO
OPTICALCOAXIAL
COMPONENT
VIDEO OUTPUT
Cb
Cr
Y
Coaxial or Optical cable
Audio cord
Video cord, S-video cord or Component cords
Controls and indicators
PLAY/PAUSE indicator
SEQ. MODE
indicator
DVD indicator
VCD indicator
CD indicator
MP3 indicator
PARENTAL LOCK
indicator
P.B.C. indicator
INTRO SCAN indicator
Display
DISC NUMBER indicator
PROGRAM indicator
RANDOM indicator
TITLE indicator
TRACK indicator
CHAPTER indicator
HOUR indicator
MINUTE indicator
SECOND indicator
DV-505/DVF-R4050 (EN)
REPEAT indicators
REPEAT
REPEAT 1
REPEAT DISC
REPEAT ALL DISCS
A-B REPEAT
Character
information
display section
13
Preparations
1 POWER ON / OFF switch %
2 Disc tray %
3 DISC SKIP key &
4 SEQUENCE MODE key &
00
5
0 (Open/Close) key %
00
6 DISC 1 ~ DISC 5 keys &
66
7
6 (Play/Pause) key %
66
77
8
7 (Stop) key %
77
9
44
4
44
¢¢
(PREV.),
¢(NEXT) (Skip) keys ^
¢¢
14
Operation of remote control unit
The keys on the remote control unit with the same names as on the
main unit have the same function as the keys on the main unit.
DV-505/DVF-R4050 (EN)
1
2
3
4
5
6
7
8
Preparations
9
0
DIMMER
9
DISC
123
DISC
456
789
DISC SKIP
0
SHIFT
SUBTITLE
MULTI CONTROL
P.MODE
RANDOM
SLOW
1¡4¢
REPEAT
A-B
MENU
ON SCREEN
SEQ. MODE
TOP MENU
AUDIO
CLEAR
ANGLE
ON/OFF
RETURN ENTER
STEP
76
!
@
#
$
%
^
&
1 Numeric keys *
2 CLEAR key &
3 DISC SKIP key (
4 SHIFT key
5 Cursor Up (
and Right (
55
5), Down (
55
33
3) keys &
33
∞∞
∞), Left (
∞∞
22
2)
22
6 P.MODE key ¢
RANDOM key £
7 SLOW (Back slow/
Forward slow) keys ^
STEP (Back step/
Forward step) keys ^
1 1
8
1 key/
1 1
¡ ¡
¡ key (Search key)
¡ ¡
^
44
4
44
(PREV.)
key/
¢¢
¢
¢¢
(NEXT)
key (Skip
key)
^
9 REPEAT key ™
A-B Repeat key ™
0 DIMMER key ·
! MENU keys §
@ ON SCREEN key &
# TOP MENU %,›
$ AUDIO key (,›
% ANGLE key )
^ RETURN key §
ENTER key &
77
&
7 (Stop) key %
77
66
6 (Play/Pause) key %
66
Model : RC-D0308
Infrared ray system
Loading batteries
2 Insert batteries. 3 Close the cover.1 Remove the cover.
÷ Insert two R6/LR6 (“AA”-size) batteries
following the polarity indications.
Operation
Insert the power plug into a power outlet, press the POWER
key of the main unit to ON, then press the desired remote
control key.
÷When pressing more than one remote control keys successively,
press the keys securely by leaving an interval of 1 second or more
between pressing of keys.
Remote sensor
6m
30º
30º
Notes
Notes
Operating range (approx.)
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction
may occur. In such a case, change the installation position to avoid malfunction.
Loading...