This instruction manual is for some models. Model availability and features (functions) may differ depending on the country
and sales area.
B60-5378-00 00 MA (E,Y) AP 0304
1
DEUTSCH
ITALIANO
ESPAÑOL
Unpacking
Unpack the unit carefully and make sure that all the accessories are present.
Recharger stand (1 DPC-X937/DPC-X637 only) AC adaptor (1 DPC-X937/DPC-X637 only)
Rechargeable batteries (2 DPC-X937/DPC-X637 only) Batteries case (1 DPC-X937/DPC-X637 only)
External batteries case (1 DPC-X937 only) Remote control unit (1) Clip (1) Headphones (1)
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped
to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on
this product.
ModelSerial Number
2
DEUTSCH
ITALIANO
ESPAÑOL
Contents
Caution : Read the pages marked carefully to ensure safe operation.
Before applying power ............................................ 4
Caution : Read this page carefully to ensure safe operation.
Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
The marking of products using lasers
CLASS 1
LASER PRODUCT
The marking this product has been classified as Class 1.
It means that there is no danger of hazardous radiation
outside the product.
Location: Battery cover
4
(For countries other than U.S.A., U.S.-Military and Canada)
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE
INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
Inside this laser product, a laser diode classified as Class
3A laser radiation is contained as alerted by the internal
caution label shown above. Do not stare into beam or view
directly with optical instruments.
Location: Inside this product
DEUTSCH
ITALIANO
ESPAÑOL
IMPORTANT SAFEGUARDS
Caution : Read this page carefully to ensure safe operation.
Please read all of the safety and operating instructions before operating this unit. For best
results, follow all warnings placed on the unit and adhere to the operating and use instructions. These safety and operating instructions should be retained for future reference.
1. Power sources – The appliance
should be connected to a power
supply only of the type described in
the operating instructions or as
marked on the appliance.
2. Power-cord protection – Power-
supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or
against them. Pay particular attention
to cords at plugs, convenience
receptacles, and the point where they
exit from the appliance.
3. Enclosure removal – Never remove
the enclosure. If the internal parts are
touched accidentally, a serious
electric shock might occur.
4. Drop – Do not drop the unit or apply
strong shock to it. (Damage due to
dropping the unit is not covered by the
warranty.)
5. Ventilation – Avoid hindering the
ventilation of the appliance by
covering it with a cloth, etc.
6. Abnormal smell – If an abnormal
smell or smoke is detected,
immediately turn the power OFF and
pull out the power cord. Contact your
dealer or nearest service center.
7. Heat – Avoid placing the appliance
under direct sunlight or near a source
of heat such as heating equipment.
Particularly, never leave it in an
automobile or on the dashboard.
5
DEUTSCH
ITALIANO
ESPAÑOL
8. Temperature – The appliance may
not function properly if used at
extremely low, or freezing
temperatures. The ideal ambient
temperature is above +5°C (41°F).
9. Water and moisture – The appliance
shall not be exposed to dripping and
splashing — for example, near a
bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or
near a swimming pool, etc. Do not
place an object containing liquid, such
as a flower vase, on the appliance.
10.Dust and moisture – Avoid places
where is dusty or where the humidity
is high.
11.Vibrations – Avoid placing the
appliance on an unstable place such as
a shelf or in a place subject to
vibrations.
12.Magnetic fields –
Keep the appliance
away from sources of magnetic fields
such as TV sets, speaker systems, radios,
motorized toys or magnetized objects.
6
13.Cleaning – Do not use volatile
solvents such as alcohol, paint
thinner, gasoline, or benzine, etc. to
clean the cabinet. Use a clean dry
cloth.
14.Nonuse periods – The power cord of
the unit should be unplugged from the
outlet when left unused for a long
period of time.
15.Damage requiring service – The
appliance should be serviced by
qualified service personnel when :
A. The power-supply cord or the plug
has been damaged.
B. Objects have fallen, or liquid has
been spilled into the appliance.
C. The appliance has been exposed to
rain.
D. The appliance does not appear to
operate normally or exhibits a
marked change in performance.
E. The appliance has been dropped,
or the enclosure damaged.
DEUTSCH
ITALIANO
ESPAÑOL
16.Servicing – The user should not
attempt to service the unit beyond
that described in the operating
instructions. All other servicing should
be referred to qualified service
personnel.
17.CAUTION – TO PREVENT ELECTRIC
SHOCK DO NOT USE THE AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
3 Timer-related indicator
4 Sound Mode indicator
5 Track number indicator
6 Playing time indicator
Battery
Type
Rechargeable
batteries
Alkaline
batteries
Blinking TimingTreatment
When the batteries is
nearly exhausted.
When the batteries
are half exhausted.
In a while, the power
will be turned off
automatically. Then
recharge the batteries.
Playback is possible
while the indicator is
blinking.
9
DEUTSCH
ITALIANO
ESPAÑOL
Using the Clip
Attach the clip to the headphone cord as shown below.
Clip the remote control unit to the edge of your bag or
pocket.
Press and release
Recharger stand
Recharging terminals
(DPC-X937/DPC-X637 only)
External battery case
10
Press and release
(DPC-X937 only)
To DC IN jack
Speakers
DEUTSCH
ITALIANO
ESPAÑOL
Power Supply
This unit can be powered from the provided rechargeable batteries, commercially sold AAA alkaline batteries or the
household power supply.
When Using Commercially Sold AAA Alkaline Battery (LR03)
1 Push the 0 PUSH OPEN key and open the
top cover.
2 Open the battery cover.
2
3 Insert 2 alkaline batteries and
close the cover.
÷ Make sure the positive ª and
negative · poles are properly
aligned.
1
÷ Use commercially available AAA (LR03) batteries.
The unit may not operate normally if manganese batteries are used.
÷ Replace both batteries at the same time.
÷ The battery cover may be detached when it is sub-
jected to an excessive force. In this case, attach the
1
battery cover again as shown below.
2
Never use an alkaline battery and the rechargeable battery together.
11
DEUTSCH
ITALIANO
ESPAÑOL
Rechargeable battery operation
Always use the specially provided rechargeable battery or a separately purchased NB-3A70. Never use a battery
other than a battery authorized by Kenwood.
Charge the battery with the power to the unit turned off. (The battery is not charged while the unit is in operation.)
1
Loading the batteries.
1 Push the 0 PUSH OPEN key and open
the top cover.
2 Open the battery cover.
(DPC-X937/DPC-X637 only)
2
÷ During battery charging or use of the unit, the battery
may become warm. This is normal and does not indicate a malfunction.
Never use an alkaline battery and the
rechargeable battery together.
Preparation of the recharger stand
3 Insert 2 rechargeable
batteries and close the
cover.
÷ Make sure the positive ª and
negative · poles are properly
aligned.
÷ A small amount of power is used even when the
unit is turned OFF. If the unit is not used for a long
time, therefore, remove the battery and store it in a
12
safe place.
1
1
2
1
Connect the AC adaptor to the
DC IN jack of the recharger
stand.
÷ Install the recharger stand on a
level surface.
÷ Keep the recharging terminals and
battery terminals always clean.
2 Connect the AC adaptor to
the household wall outlet.
÷ Disconnect the AC adapter
from the wall outlet when the
recharger stand is not used.
DC IN
DEUTSCH
ITALIANO
ESPAÑOL
2
Charging the rechargeable batteries.
Place the main unit on
the recharger stand by
aligning the triangular
markings on them.
÷ The unit can be operated while it is placed on the
recharger stand during as well as after charging.
÷ Recharging is not possible during playback. Be
sure to switch the power OFF before starting recharging.
÷ Be sure to close the top cover of the unit before
proceeding to recharging.(Close securely by
pushing the front right position of the top cover
unit it clicks.)
÷ The CHARGE indicator lights when charging starts and
goes off when it completes.
Charging in progress
Lights up
DPC-X937: Recharging completes in about 2.5 hours.
DPC-X637: Recharging completes in about 6 hours.
÷ If charging doesn't start, wait for at least 3 seconds before
placing the main unit again.
÷ After the batteries have been charged, remove the AC
adapter. Disconnect the AC adapter from the wall outlet
when the recharger stand is not used.
÷ When using a rechargeable battery which is new or which
has not been used for more than 2 months, the operating
period may be shorter than nomal. This is due to the properties of the battery and not a malfunction. After recharging, use the battery on the unit until it is exhausted. The
original performance of the battery performance can be
recovered by repeating this cycle a few times.
÷ Rechargeable batteries can be recharged. When the
playable time per recharge reduces, please newly purchase the optional (NB-3A70) rechargeable batteries.
Charging completed
Goes off
For the U.S.A.
13
DEUTSCH
ITALIANO
ESPAÑOL
Using the external battery case
(DPC-X937 only)
1 Attach the
external battery
case to the
main unit
To EXT BATT jack
÷ When attaching the external battery case to the main
unit, be sure to align the orientation of the plug before inserting it. (See the figure.)
÷ Rechargeable batteries inside the unit cannot be
charged while the external battery case is attached.
2 Open the batteries
cover.
2
3 Insert 2 alkaline
batteries and close the
cover.
÷ Make sure the positive ª
and negative · poles are
properly aligned.
14
÷ Use two commercially sold AA alkaline batteries with the
external battery case.The unit may not operate normally if
manganese batteries are used.
÷ When carrying the external battery case without attach-
ing it to the main unit, remove the batteries from the
case. If the case containing batteries is put in a pocket or
bag together with a metallic object such as a key holder,
the + and - terminals of the battery case may be shorted
due to contact with the metallic object.
÷ The battery case can be used simultaneously with the
batteries inside the unit to extend the overall playback
time.
1
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.