Kenwood DDX4031, DDX4031BT, DDX4031BTM, DDX4031M, DDX6031 Instruction Manual

...

DDX6031BT DDX6031BTM DDX6031 DDX6031M DDX4031BT DDX4031BTM DDX4031 DDX4031M

MONITOR WITH DVD RECEIVER

INSTRUCTION MANUAL

This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area.

• Region 2 (DVD Region Code 2 area)

• Region 3 (DVD Region Code 3 area)

• Region 4 (DVD Region Code 4 area)

• Region 6 (DVD Region Code 6 area)

LVT2271-001A (MN/M2N/XN)

Contents

Before use ......................................3

How to reset your unit .............................................3

INTRODUCTIONS

Initial Settings ............................... 5

Initial setup ......................................................................5

Adjusting the panel angle .....................................5

Updating the system .................................................6

Setting the security function ...............................7

Component names and

functions .................................. 8

Setting the clock .......................... 10

Common operations ...................11

Turning on the power ..........................................11

Turning off the power ..........................................11

Adjusting the volume ...........................................11

Putting the unit in standby ...............................11

Turning off the screen ..........................................11

Switching screens .......................12

AV SOURCE OPERATIONS

Selecting the playback source....13

Displaying the source control screen ..........13

Disc operations ............................ 14

Playing a disc ..............................................................14

Playable disc types...................................................15

Playback operations ...............................................16

Settings for disc playback ..................................20

USB operations ............................ 21

Playing a USB device .............................................21

Listening to the iPod/iPhone

device .....................................23

iPod/iPhone playback operations .................24

Selecting a track/video from menu on the

iPod/iPhone .................................................................25

Operating in iPod/iPhone control mode ...25

Listening to the radio ..................26

Using other external

components ...........................31

AV-IN .................................................................................31

Using the external navigation unit ...............32

Sound adjustment .......................33

Using the sound equalization .........................33

Adjusting the cross over frequency ..............34

Changing the display design ......35

2 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Setting for video playback .........37

Picture adjustment .................................................37

Changing the aspect ratio .................................38

Zooming picture .......................................................38

Using a rear view camera ............39

Using the steering remote

controller ...............................40

Setting menu items .....................41

Memorizing/recalling the settings ................45

Locking the settings ...............................................45

Adjusting the touch position ............................45

BLUETOOTH OPERATIONS

(Only for DDX6031BT/DDX6031BTM/ DDX4031BT/DDX4031BTM)

Information for using Bluetooth®

devices ...................................46

Bluetooth operations ..................46

Connecting Bluetooth devices .......................47

Using the Bluetooth mobile phone ............49

Using the Bluetooth audio player .................54

Bluetooth device settings ...................................54

USING THE REMOTE CONTROLLER

Overview ...................................... 56

Operations from the remote

controller ...............................57

REFERENCE

Maintenance ................................61

More about this unit ...................62

Troubleshooting ..........................64

Accessories/Installation

Procedure ...............................68

Connecting Wires to Terminals ...70 Connecting a USB device/iPod/

iPhone ....................................71

Connecting Other Products ........ 72

Installing the Unit ........................73

Specifications ..............................75

KS-UBT1 (USB Bluetooth

Adapter) .................................78

Before use

WARNINGS:

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while

driving, be sure to look around carefully.

• The driver must not watch the monitor while driving.

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip.

Press the buttons on the touch panel with

your finger directly (if you are wearing a glove, take it off).

• When the temperature is very cold or very hot... – Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or

may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For safety...

• Do not raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

How to reset your unit

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

Reset button

DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed (except the registered Bluetooth devices).

How to read this manual:

• Illustrations of DDX6031BT are mainly

• This manual mainly explains operations

• < > indicates the variable screens/

•

• Indication language: English

The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels.

Reset button

used for explanation.

using the buttons on the monitor panel and touch panel. For operations using the remote controller (RCDV340: supplied only for DDX6031BT/ DDX6031/DDX4031BT/DDX4031 (Region 3), DDX6031BTM/DDX6031M/ DDX4031BTM/DDX4031M), ☞ page 56.

menus/operations/settings that appear on the touch panel. [ ] indicates the buttons on the touch panel.

indications are used for the purpose of explanation. You can select the indication language from the <Setup> menu. (☞ page 44)

English 3

The marking of products using lasers

CLASS 1

LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit

DDX6031BTM/DDX6031M/DDX4031BTM/ DDX4031M :

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer:

JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohamashi, Kanagawa, 221-0022, Japan

EU Representative’s:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

For Turkey Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.

This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.

4 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

INTRODUCTIONS

Initial Settings

Initial setup

When you power on the unit for the first time or reset the unit, the initial setting screen appears.

• You can also change the settings on the <Setup> screen. (☞ page 41)

Language Select the text

Angle

Only for DDX6031BT/ DDX6031BTM/ DDX6031/ DDX6031M

AV Input Select an external

R-CAM Interrupt

Panel Color Select the color of

language used for on-screen information. (☞ page 44 )

Adjust the panel angle. (☞ the right column)

component to play — <AV-IN2> or <iPod>. (☞ page 43 )

Select <ON> when connecting the rear view camera. (☞ page 43 )

the buttons on the monitor panel. (☞ page 35)

Adjusting the panel angle

(Only for DDX6031BT/DDX6031BTM/ DDX6031/DDX6031M )

You can change the panel angle.

1 Select an angle (0 – 6).

To set the current position as the power off position, select <Memory>.

2 Finish the procedure.

English 5

Updating the system

You can update the system by connecting a USB device containing the update file.

1 Create an update file, copy it

to a USB device, and connect it to the unit.

To connect a USB device, ☞ page 71 .

2 On <Top Menu>:

It may take a while. If the update has been complete successfully, “Update Completed” appears. Reset the unit.

* If the update has failed, turn the power off

and then on, and retry the update.

* Even if you have turned off the power

during update, you can restart the update after the power is turned on. The update will be performed from the beginning.

6 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Setting the security function

You can set a security code to protect your receiver system against theft.

Registering the security code

1 Display the security code

setting screen.

On <Top Menu>:

2 Enter a four-digit number (1),

then confirm the entry (2).

Deletes the last entry

Cancels the setting

3 Repeat step 2 to confirm your

security code.

Now, your security code is registered.

• When the unit is being reset or disconnected from battery, you are required to enter the security code. Enter the correct security code, then press [Enter].

Activating the security function

You can activate the security indicator to protect your receiver system against theft.

On <Setup>:

• To clear the registered security code, perform step <Security Code>.

1 and press [CLR] in

The security indicator on the monitor panel flashes when the vehicle ignition is off.

To cancel, select <OFF>.

English 7

Component names and functions

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

Screen (Touch panel) Monitor panel

1 Reset button/Power indicator/Security

indicator

• Resets the unit. (☞ page 3)

• Lights up while the unit is turned on.

• Flashes when the security function is activated. (☞ page 7)

2 ATT button (Press)

• Attenuates the sound.

V.OFF button (Hold)

• Turns off/on the screen. (☞ page 11)

3 Volume

• Decreases the volume.

4 Volume (up) button (☞ page 11)

• Increases the volume.

5 AUD button (Press)

• Displays the <Equalizer> screen. (☞ page 33)

R-CAM button (Hold)

• Displays the picture from the rear view camera.

8 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

(down) button (☞ page 11)

6 AV button (Press)

• Displays the current source screen. AV OUT button (Hold)

• Selects the AV source for external monitor or amplifier.

7 MENU/

• Turns off the power. (Hold)

• Turns on the power. (Press)

• Displays the <Top Menu> screen.

8 For DDX6031BT/DDX6031BTM: TEL button (Press)

• Displays the <Handsfree> screen. (☞

FNC button (Hold)

• Displays the source control screen. (☞

For DDX6031/DDX6031M:

FNC button (Press)

• Displays the source control screen. (☞

9 0 (Eject) button

• Ejects the disc (Tilts the monitor panel

• Opens/Closes the monitor panel.

p Remote sensor

button

(Press) (☞ page 12)

page 47)

page 12)

fully).

DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

6 AV/AV OUT button

7 For DDX4031BT/DDX4031BTM:

TEL/V.OFF button

Screen (Touch panel) Monitor panel

8 VOL/AT T knob (☞ page 11)

1 Loading slot 2 0 (Eject) button

Ejects the disc.

3 Remote sensor 4 Reset button/Power indicator/Security

indicator

• Resets the unit. (☞ page 3)

9 FNC/R-CAM button

• Lights up while the unit is turned on.

• Flashes when the security function is activated. (☞ page 7)

5 MENU/

• Turns off the power. (Hold)

• Turns on the power. (Press)

button

p USB input terminal q iPod/AV-IN2 input terminal

• Displays the <Top Menu> screen. (Press) (☞ page 12)

• Displays the current source screen. (Press)

• Selects the AV source for external monitor or amplifier. (Hold)

• Displays the <Handsfree> screen. (Press) (☞ page 47)

• Turns off/on the screen. (Hold) (☞ page 11)

For DDX4031/DDX4031M:

AUD/V.OFF button

• Displays the <Equalizer> screen. (Press) (☞ page 33)

• Turns off/on the screen. (Hold) (☞ page 11)

• Attenuates the sound. (Press)

• Adjusts the audio volume. (Turn)

For DDX4031BT/DDX4031BTM only:

AUD button

• Displays the <Equalizer> screen. (Hold) (☞ page 33)

• Displays the source control screen. (Press) (☞ page 12)

• Displays the picture from the rear view camera. (Hold)

Caution on volume setting:

Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level.

You can change the color of the buttons on the monitor panel. (☞ page 35)

English 9

Setting the clock

1 Display <Top Menu> screen.

2 Display <Setup> screen.

4 Set the clock time.

<NAV> *

<Radio Data System> *

<OFF> Sets the clock manually.

Adjust the hour

Adjust the minute

[Reset]: Sets the minute to “00.”

Synchronizes the clock time with the connected navigation unit.

Synchronizes the clock

time with FM Radio Data System .

(☞ below)

Example: 3:00 – 3:29 = 3:00 3:30 – 3:59 = 4:00

5 Finish the procedure.

• The time format of the clock display differs as follows: 24 hours: Region 2/3/6 models 12 hours: Region 4 models

Appears only when the navigation unit is

connected.

Not selectable for Region 4/6 models.

10 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Common operations

Turning on the power

DDX6031BT/ DDX6031BTM/ DDX6031/DDX6031M

DDX4031BT/ DDX4031BTM/ DDX4031/DDX4031M

Turning off the power

DDX6031BT/ DDX6031BTM/ DDX6031/DDX6031M

DDX4031BT/ DDX4031BTM/ DDX4031/DDX4031M

(Hold)

Adjusting the volume

To adjust the volume (00 to 35)

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

IncreaseDecrease

DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

IncreaseDecrease

Putting the unit in standby

Turning off the screen

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

DDX4031BT/ DDX4031BTM

(Hold)

DDX4031/ DDX4031M

To attenuate the sound

DDX6031BT/ DDX6031BTM/ DDX6031/DDX6031M

The ATT indicator lights up.

To cancel the attenuation, press the ATT button ( DDX6031BT/DDX6031BTM/ DDX6031/DDX6031M) or VOL/ATT knob ( DDX4031BT/DDX4031BTM/DDX4031/ DDX4031M) again.

DDX4031BT/ DDX4031BTM/ DDX4031/DDX4031M

(Hold) (Hold)

The screen is turned off.

To turn on the screen, press MENU/

English 11

Switching screens

Source control screen

Displays the navigation screen. * (☞ page 32)

• Changes the AV source.

• Displays the <Setup> screen.

You can select 3 items to be displayed in

☞ page 13)

this area. (

* Appears only when

a navigation unit is connected.

<Setup>

Changes the detailed settings.

Changes the page

☞ page 11

Press [ ] to return to the previous screen.

Touch screen operation

Displays the video control menu while playing a video.

Goes to the previous

chapter/track.*

Displays the source control screen while playing a video.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

Not available for video from an external component and rear view camera.

12 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Goes to the next chapter/ track.*

AV SOURCE OPERATIONS

Selecting the playback source

NAV

*3 (☞ page 32)

Displays the navigation screen when a navigation unit is connected.

DISC

(☞ page 14)

TEL

*4 (☞ page 50)

USB

(☞ page 21)

iPod

* 5 (☞ page 23)

TUNER

(☞ page 26)

AV-IN 1/AV-IN 2

* 5 (☞ page 31)

Plays a disc.

Displays the Bluetooth mobile phone setting screen.

Plays files on a USB device.

Plays an iPod/iPhone.

Switches to the radio broadcast.

Switches to an external component connected to AV-IN input terminal.

Bluetooth

*4 (☞ page 54)

You can select 3 items to be displayed in this area. (☞ page 42) Switches between the previous and next pages. When no navigation unit is connected, “No Navigation” appears. Only for DDX6031BT/DDX6031BTM/DDX4031BT/DDX4031BTM. Select an appropriate input setting on <AV Input>. (☞ page 43)

Plays a Bluetooth audio player.

Displaying the source control screen

On each playback screen, perform the following:

DDX6031BT/DDX6031BTM/ DDX6031/DDX6031M

(Hold)

• For DDX6031BT/DDX6031BTM/DDX6031/DDX6031M, pressing and holding TEL hides the operation buttons. For DDX4031BT/DDX4031BTM/DDX4031/DDX4031M, pressing FNC/RCAM hides the operation buttons.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

DDX4031BT/DDX4031BTM/ DDX4031/DDX4031M

English 13

Disc operations

Playing a disc

• If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.

Inserting a disc

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

To eject a disc

DDX6031BT/DDX6031BTM/DDX6031/DDX6031M

Label side

DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Label side

The source changes to “ starts.

• The IN indicator lights up while a disc is inserted.

• If “

” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “

operations will not be accepted.

• When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo.

DISC

” and playback

,”

DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

• You can eject a disc when playing another AV source.

• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

When removing a disc, pull it horizontally.

Closing the monitor panel (For DDX6031BT/DDX6031BTM/

DDX6031/DDX6031M)

After removing the disc, press the eject button again. The monitor panel closes.

14 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Playable disc types

Disc type Recording format, file type, etc Playable

DVD DVD-Video *

Region Code:

• For DDX6031BT/DDX6031/DDX4031BT/ DDX4031 : 3/4/6 (depending on the country and sales area)

• For DDX6031BTM/DDX6031M/DDX4031BTM/ DDX4031M : 2

DVD-Audio/DVD-ROM

DVD Recordable/ Rewritable (DVD-R/-RW * +R/+RW *

)

• DVD Video: UDF bridge

• DVD-VR

• DivX

/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV/ AAC: ISO 9660 level 1,

DVD-Video

DVD-VR *

DivX /MPEG1/MPEG2

JPEG

MP3/WMA/WAV/AAC

MPEG4/DVD+VR/DVD-RAM

level 2, Romeo, Joliet

Dual Disc DVD side

Non-DVD side

CD/VCD DTS-CD/Audio CD/CD Text (CD-DA)

VCD (Video CD)

SVCD (Super Video CD)/CD-ROM/CD-I(CD-I Ready)

CD Recordable/ Rewritable (CD-R/-RW)

• ISO 9660 level 1, level 2, Romeo, Joliet

CD-DA

VCD (Video CD)

DivX

JPEG

MP3/WMA/WAV/AAC

MPEG4

If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the screen.

DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not playable.

It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable.

This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

/MPEG1/MPEG2

English 15

Playback operations

To display the source control screen, ☞ page 13.

For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG

Media type

• DVD Video: Title no./Chapter no.

• DVD-VR: Program no. (or Playlist no.)/Chapter no.*

• DivX/MPEG1/MPEG2: Folder no./Track no.

• JPEG: Folder no./File no.

• VCD: Track no.

[ ]

[

[3 8]

[7]* [4] [¢]

Selects playback mode. (☞page19)

Starts/Pauses playback.

Stops playback.

• Selects chapter/track.

• Reverse/forward

• For DivX/MPEG1/MPEG2/JPEG, the following buttons also appear:

[ ] [ ] Selects folder.

(Press)

search.*

(Hold)

☞ page 32

File type (for DivX/MPEG1/MPEG2/JPEG)

Playback mode

[1] [¡]

[Mode]*

[MENU]

[ ]

Playing time

• Reverse/forward search during playback.*

• Plays back in slowmotion during pause.

Changes the settings for disc playback. (☞page20)

Displays <Top Menu> screen.

Displays folder/track list. (☞page17)

To display the Original Program/Playlist screen, ☞page18.

Does not appear for DVD/DVD-VR/JPEG.

Appears only for DVD/DVD-VR/VCD.

Search speed varies depending on the type of disc or file.

Does not appear for VCD.

16 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

To display the source control screen, ☞ page 13.

For CD/MP3/WMA/WAV/AAC

Track/file information

• Pressing [<] scrolls the text if not all of the text is shown.

Media type

☞ page 32

While playing, the jacket picture is shown if the file has the tag data including the jacket picture.

[ ] [ ]

Selects playback mode. (☞page19)

[

] *

Displays folder/track list. (☞below)

[3 8] Starts/Pauses playback.

] [ ] *1Selects folder.

[

Does not appear for CD.

Search speed varies depending on the type of disc or file.

File type

Playback mode

Playing time

Playback status (3: play / 8: pause )

• MP3/WMA/WAV/AAC: Folder no./Track no.

• CD: Track no.

[4] [¢] Selects track. [1] [¡] Reverse/forward search.*

[Mode] *

Changes the settings for disc playback. (☞page20)

[MENU] Displays <Top Menu>

screen.

Selecting folder/track on the list

Plays tracks/files in the folder

Changes the page

Returns to the upper layer

Returns to the root folder

Playing Recordable/Rewritable discs

• This unit can recognize a total of 5000 files and 250 folders (a maximum of 999 files per folder).

• Use only “finalized” discs.

• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

• Some discs or files may not be played back due to their characteristics or recording conditions.

English 17

Video menu operations

You can display the video menu screen while watching the playback pictures on the screen.

• Available items on the screen differ depending on the types of the loaded disc and playback files.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

• The screen for MPEG1/MPEG2 differs from the above.

[Audio] Selects the audio type.

[Subtitle] Selects the subtitle type.

[Angle] Selects view angle.

[MENU] Displays the disc menu

[T MENU] Displays the disc menu

[CUR] Displays the menu/playlist/

[Highlight] Switches to the direct menu

[Picture Adjust]

[Aspect]

[ZOOM] Displays the picture size

• For DVD-VR: Selects the audio channel (ST: stereo, L: left, R: right).

(DVD)/playlist (DVD-VR).

(DVD)/original program (DVD-VR).

original program item selecting screen.

• [5] [∞] [2] [3]: Selects an item. – For DivX only

[2] [3]: Skips back or forward by about 5 minutes.

• [ENTER]: Confirms the selection.

• [RETURN]: Returns to the previous screen.

selection mode. Press the target item to select.

Displays picture adjustment screen. (☞ page 37)

Selects aspect ratio. (☞ page 38)

selecting screen. (☞ page 38)

18 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Only for VCD

Direct selecting buttons (☞ below)

[Audio] Selects the audio channel (ST:

[Return] Displays the previous screen

[MENU] Displays the disc menu.

[Picture Adjust]

[Aspect]

[ZOOM] Displays the picture size

[Direct] Displays/hides the direct

• To select a track directly

– To switch between chapter/track entry

and title/folder entry, press [Direct/CLR].

– When you enter a wrong number, press

[Direct/CLR] to delete the last entry.

stereo, L: left, R: right).

or the menu.

Displays picture adjustment screen. (☞ page 37)

Selects aspect ratio. (☞ page 38)

selecting screen. (☞ page 38)

selecting buttons. (☞ below)

• To deactivate the PBC function, press [7]

then the direct selecting buttons to select a track number.

Selecting playback mode

For DVD/DVD-VR

Selects Repeat playback mode

For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC

Selects Random

playback mode*

* You cannot activate the repeat mode and the

random mode at the same time.

• Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) – Available items differ depending on the

types of loaded disc and playback file.

Indicator Playback mode

C-REP Repeats current chapter. T-REP Repeats current title/

program.

REP Repeats current track. FO-REP Repeats all tracks of the

current folder.

RDM Randomly plays all tracks. FO-RDM Randomly plays all tracks of

current folder, then tracks of next folders.

To cancel, press the button repeatedly until the indicator disappears.

Selects Repeat

playback mode*

English 19

Settings for disc playback

Disc Setup items Selectable setting/item Initial: Underlined

Menu Language

Subtitle Language

Audio Language

Down Mix When playing back a multi-channel disc, this setting affects the

For DVD/DVD-VR

Dynamic Range Control

Screen Ratio Select the monitor type to watch a wide screen picture on the

For discs

except VCD/CD

File Type Select the playback file type when a disc contains different types of

For discs containing

audio/video/picture files

Select the initial disc menu language; Initial English (☞ page 63).

Select the initial subtitle language or erase the subtitle (OFF); Initial English (☞ page 63).

Select the initial audio language; Initial English (☞ page 63).

signals reproduced through the front and/or rear speakers.

♦ Dolby

Surround

♦ Stereo : Normally select this.

You can change the dynamic range while playing Dolby Digital software.

♦ Wide : Select this to enjoy a powerful sound at a low

♦ Normal : Select this to reduce the dynamic range a

♦ Dialog : Select this to reproduce the movie dialog

external monitor.

♦ 16:9 ♦ 4:3 LB (Letterbox) ♦ 4:3 PS (PanScan)

files.

♦ Audio ♦ Still Image ♦ Video ♦ Audio&Video

• For playable file types, ☞ page 15.

• If the disc contains no files of the selected type, the existing files are played in the following order: audio, video, then still image.

: Select this to enjoy multi-channel surround

audio with Dolby Surround.

volume level with its full dynamic range.

little.

more clearly.

: Plays back audio files. : Plays back JPEG files. : Plays back DivX/MPEG1/MPEG2 files. : Plays back audio files and DivX/MPEG1/MPEG2

files.

20 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

USB operations

Playing a USB device

• This unit can play JPEG/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC files stored in a USB mass storage class device.

• This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).

• Make sure all important data has been backed up to avoid losing the data.

Connecting a USB device

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.

• You cannot connect a computer or portable HDD to the USB input terminal.

• To connect a USB device,

When a USB device is connected...

The source changes to “ starts.

• All tracks in the USB device will be played repeatedly until you change the source.

To disconnect the USB device safely

Press [0], then disconnect the USB device after “No Device” appears.

☞

page 71.

USB

” and playback

Cautions:

• This unit may not play back files in a USB device properly when using a USB extension cord.

• USB devices equipped with special functions such as data security functions cannot be used with the unit.

• Do not use a USB device with 2 or more partitions.

• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

• This unit may not recognize a memory card inserted into the USB card reader.

• When connecting with a USB cable, use the USB 2.0 cable.

• The maximum number of characters for:

– Folder names : 50 characters – File names : 50 characters

• Avoid using the USB device if it might effect driving safety.

• Do not pull out and connect the USB device repeatedly while “Reading...” is shown on the screen.

• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.

• Operation and power supply may not work as intended for some USB devices.

• Do not leave a USB device in the car, or expose to direct sunlight or high temperature to avoid deformation or damage to the device.

English 21

To display the source control screen, ☞ page 13.

While playing, the

jacket picture is shown if the file has the tag data

including the jacket

picture.

☞ page 32

Track/file information (for MP3/WMA/WAV/ AAC)

• Pressing [<] scrolls the text if not all of the text is shown.

Playing time Playback status (3: play / 8: pause )

Playback mode

[ ]

Selects repeat playback mode.

• REP: Repeats current track.

• FO-REP: Repeats all tracks of the current folder.

Selects random playback mode.

[

]

• RDM: Randomly plays all tracks.

• FO-RDM: Randomly plays all tracks of the folder.

[0] Press this button before

disconnecting. (☞ page 21)

File type

• MP3/WMA/WAV/AAC: Folder no./Track no.

• JPEG: Folder no./File no.

*1*

[ ]

Displays folder/track list. (☞ page 17)

[3 8] Starts/Pauses playback. [4] [¢] Selects track.

*1*

[1] [¡] Reverse/forward search.*

[ ] [ ] Selects folder.

[Mode] Changes the settings for

file playback. (☞below)

[MENU] Displays <Top Menu>

screen.

• Available items differ depending on the types of playback file.

To cancel random or repeat mode, press the button repeatedly until the indicator disappears.

You cannot activate the repeat mode and the random mode at the same time.

Search speed varies depending on the type of disc or file.

Setting <Screen Ratio>

Select the monitor type to watch a wide screen picture on the external monitor.

16:9

Setting <File Type>

Audio Plays back audio files.

Still Image Plays back JPEG files.

Video Plays back DivX/MPEG1/

MPEG2 files.

4:3 LB

(Letterbox)

4:3 PS

(PanScan)

Audio&Video Plays back audio files and

DivX/MPEG1/MPEG2 files.

• If the USB device contains no files of the selected type, the existing files are played in the following order: audio, video, then still image.

Setting <Drive Select>

Press [Next] to switch to another USB device when multiple USB devices are connected via a USB hub or the like.

22 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

Listening to the iPod/iPhone device

Preparation

• Connect iPod/iPhone. (☞ page 71 )

• Use the following cables: –

To watch the video and to listen to the music (analog): USB Audio and

Video cable for iPod/iPhone— (optional accessory)

– To listen to the music (digital): USB

Audio cable for iPod/iPhone—KCA-iP102 (optional accessory)

• Select appropriate input settings on <AV Input> according to the connection method (

☞

• Do not use extension cables.

iPod/iPhone that can be connected to this unit: Made for – iPod with video – iPod classic – iPod nano (6th Generation) – iPod nano (5th Generation) – iPod nano (4th Generation) – iPod nano (3rd Generation) – iPod nano (2nd Generation) – iPod nano (1st Generation) – iPod touch (4th Generation) – iPod touch (3rd Generation) – iPod touch (2nd Generation) – iPod touch (1st Generation) – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone

the right column).

KCA-iP202

Settings for iPod playback

When the source is “

iPod

”...

Audiobooks Selects the speed of

audio books.

Artwork Shows/hides the iPod

artwork.

Setting <AV Input>

You can change the setting only when the unit is in standby.

1 On <Top Menu>:

AV-IN2

iPod

Select this when connecting the iPod/iPhone using the USB Audio cable for iPod/ iPhone.

Select this when connecting the iPod/iPhone using the USB Audio and Video cable for iPod/iPhone.

English 23

iPod/iPhone playback operations

To display the source control screen, ☞ page 13.

• Select “

• The operations explained in this manual are under the condition when the unit is selected

iPod

” as the source. (☞ page 13)

for controlling playback. (☞ below)

While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song contains the

Artwork.*

Song/video information

• Pressing [<] scrolls the text if not all of the text is shown.

Playing time

Playback status (3: play / 8: pause )

[MENU] Displays <Top Menu> screen.

☞ page 32

[Mode] Changes the settings for iPod

playback. (☞ page 23)

[38] Starts/Pauses playback.

] Selects Repeat playback

[

mode. *

• REP: Functions the same as “Repeat One.”

[

Selects Random playback

]

mode. *

Playback mode

[ ]

[4]

Displays the Music/Video menu on the iPod/iPhone. (☞ page 25) Selects a track/video.*

[¢] [1]

Reverse/forward search.

[¡] [APP] Select iPod to play back using

iPod/iPhone—iPod control

mode.*

(☞ page 25)

• RDM: Functions the same as “Shuffle Songs.”

• A-RDM: Functions the same as “Shuffle Albums.”

For changing the Artwork display setting, ☞ page 23.

To cancel random or repeat mode, press the button repeatedly until the indicator disappears. Not available in iPod control mode. (

You cannot resume playback for video sources.

When using iPod nano (1st Generation) or iPod with video, you can control playback only from the unit.

☞ page 25)

• When you turn on this unit, the iPod/ iPhone is charged through the unit.

• The text information may not be displayed correctly.

• For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or is slow, reset your iPod/iPhone.

• For the latest compatible list and software version of iPod/iPhone, see:

www.kenwood.com/cs/ce/ipod

24 DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M

+ 56 hidden pages