Kenwood DDX370 User Manual 2
DDX790
DDX770
DDX7070BT
DDX470
DDX4070BT
DDX370
DDX3070
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty
card, and in the space provided below. Refer to the model and serial numbers whenever you call
upon your Kenwood dealer for information or service on the product.
Model DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT/DDX370/DDX3070 Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2012 JVC KENWOOD Corporation
GET0907-001A (KN/RN)
Contents
Before use ..........................................3
How to reset your unit .............................................3
INTRODUCTIONS
Initial Settings ...................................5
Initial setup ......................................................................5
Updating the system .................................................6
Activating the security function .........................7
Component names and functions ....8
Setting the clock ............................. 10
Common operations ...................... 11
Turning on the power ..........................................11
Turning off the power ..........................................11
Adjusting the panel angle ..................................11
Adjusting the volume ...........................................11
Putting the unit in standby ...............................12
Turning off the screen ..........................................12
Switching screens .......................... 13
AV SOURCE OPERATIONS
Selecting the playback source ...... 14
Displaying the source control screen ..........14
Displaying all sources and items .....................15
Customizing the <Top Menu> screen ........15
Disc operations ............................... 16
Playing a disc ..............................................................16
Playable disc types...................................................17
Playback operations ...............................................18
<DISC Mode> settings .........................................22
USB operations ............................... 23
Playing a USB device .............................................23
Listening to the iPod/iPhone
device ........................................ 25
iPod/iPhone playback operations from the
unit ....................................................................................26
Selecting an audio/video file from the
menu ................................................................................27
Controlling playback from the iPod/
iPhone .............................................................................27
Listening to the radio ..................... 28
Listening to the SiriusXM™ Satellite
Radio ......................................... 31
Pandora® operations ...................... 38
Using other external
components.............................. 41
AV-IN .................................................................................41
Using the external navigation unit ...............42
Sound adjustment .......................... 43
Using the sound equalization .........................43
Adjusting the crossover frequency ...............44
Changing the display design ......... 45
Setting for video playback ............ 47
Picture adjustment .................................................47
Changing the aspect ratio .................................48
Zooming picture .......................................................48
Using a rear view camera ............... 49
Setting menu items ........................ 50
Memorizing/recalling the settings ................54
Locking the settings ...............................................54
Adjusting the touch position ............................54
BLUETOOTH OPERATIONS
(Only for DDX790/DDX770/DDX7070BT/
DDX470/DDX4070BT)
Information for using Bluetooth®
devices ...................................... 55
Bluetooth operations ..................... 55
Connecting Bluetooth devices .......................56
Setting up Bluetooth ..............................................58
Using the Bluetooth mobile phone ............59
Settings for Bluetooth mobile phone ..........64
Using the Bluetooth audio player .................65
USING THE REMOTE
CONTROLLER
Overview ......................................... 66
Operations from the remote
controller .................................. 67
REFERENCE
Maintenance ................................... 71
More about this unit ...................... 72
Troubleshooting ............................. 74
Accessories/Installation
Procedure ................................. 79
Connecting Wires to Terminals ...... 81
Connecting a USB device/iPod/
iPhone ....................................... 82
Connecting Other Products ........... 83
Installing/Removing the Unit ........ 84
Specifications ................................. 86
KS-UBT1 (USB Bluetooth
adapter) .................................... 89
2 English
Before use
WARNINGS:
(To prevent accidents and damage)
• DO NOT install any unit or wire any cable in
a location where;
– it may obstruct the steering wheel and
gearshift lever operations.
– it may obstruct the operation of safety
devices such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while
driving, be sure to look around carefully.
• The driver must not watch the monitor
while driving.
Cautions on the monitor:
• The monitor built in this unit has been
produced with high precision, but it
may have some ineffective dots. This is
inevitable and is not considered defective.
• Do not expose the monitor to direct
sunlight.
• Do not operate the touch panel using a
ball-point pen or similar tool with the sharp
tip.
Press the buttons on the touch panel with
your finger directly (if you are wearing a
glove, take it off).
• When the temperature is very cold or very
hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or
may move slowly. Pictures may not
be synchronized with the sound or
picture quality may decline in such
environments.
For safety...
• Do not raise the volume level too much,
as this will make driving dangerous by
blocking outside sounds, and may cause
hearing loss.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time
in hot or cold weather, wait until the
temperature in the car becomes normal
before operating the unit.
How to reset your unit
DDX790/DDX770/DDX7070BT
Reset button
DDX470/DDX4070BT/DDX370/DDX3070
Reset button
If the unit fails to operate properly, press
the Reset button. The unit returns to factory
settings when the Reset button is pressed
(except the registered Bluetooth devices).
How to read this manual:
• Illustrations of DDX770 are mainly used
for explanation.
• This manual mainly explains operations
using the buttons on the monitor panel
and touch panel. For operations using the
remote controller (RC-DV340: supplied
only for DDX7070BT/DDX4070BT/
DDX3070
• < > indicates the variable screens/
• [ ] indicates the buttons on the touch
• Indication language: English
The displays and panels shown in this
manual are examples used to provide
clear explanations of the operations. For
this reason, they may be different from the
actual displays or panels.
), ☞ page 66.
menus/operations/settings that appear
on the touch panel.
panel.
indications are used for the purpose
of explanation. You can select the
indication language from the <Setup>
menu. (☞ page
52
)
English 3
DDX790/DDX770/DDX470/DDX370:
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications
to this equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction manual.
The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
FCC NOTE
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment may cause harmful interference
to radio communications, if it is not installed
and used in accordance with the instructions.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
DDX790/DDX770/DDX470/DDX370:
CAUTION
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure. In compliance
with Federal Regulations, following are
reproductions of labels on, or inside the
product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS
RULES 21CFR SUBCHAPTER J IN EFFECT
AT DATE OF MANUFACTURE.
Location : Top plate
DDX7070BT/DDX4070BT/DDX3070:
The marking of products using lasers
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that
are of a weaker class. There is no danger of
hazardous radiation outside the unit.
DDX790/DDX770/DDX7070BT/DDX470/
DDX4070BT:
About KS-UBT1 (USB Bluetooth adapter)
The USB Bluetooth adapter is attached to
this unit when shipped from the factory.
When the adapter is removed, store it in a
safe place.
4 English
INTRODUCTIONS
Initial Settings
Initial setup
When you power on the unit for the first time
or reset the unit, the initial setting screen
appears.
• You can also change the settings on the
<Setup> screen. (☞ page 50)
1 For DDX790/DDX770/DDX7070BT :
For DDX470/DDX4070BT/DDX3070 :
For DDX370:
Language Select the text language
Angle *
AV Input Select an external
External
BUS *
R-CAM
Interrupt
Panel
Color
used for on-screen
information. (☞ page 52)
• Set <GUI Language>
to display the operation
buttons and menu
items in the selected
language ([Local]:
initially selected) or
English ([English]).
1
Adjust the panel angle.
(☞page 11)
component to play —
[AV-IN2] or [iPod]. (☞
page 52)
Select the component
2
connected to EXT I/F
input terminal — [OEM]
for ADS adapter or [SXi]
for SiriusXM Connect
Vehicle Tuner. (☞ page 52)
Select [ON] when
connecting the rear view
camera. (☞ page 52)
Select the color of the
buttons on the monitor
panel. (☞ page 45)
2 Finish the procedure.
1
*
Only for DDX790/DDX770/DDX7070BT.
2
*
Only for DDX370 .
English 5
Updating the system
You can update the system by connecting a
USB device containing the update file.
1 Create an update file, copy it
to a USB device, and connect
it to the unit.
To connect a USB device, ☞ page 82 .
2 On <Top Menu>:
3
4
6 English
Application
Version
DVD Version Updates the DVD
It may take a while.
If the update has been complete
successfully, “Update Completed”
appears. Reset the unit.
• If the update has failed, turn the power off
and then on, and retry the update.
• Even if you have turned off the power
during update, you can restart the update
after the power is turned on. The update
will be performed from the beginning.
Updates the System
application.
System application.
Activating the security
function
You can activate security function to protect
your receiver system against theft.
1 On <Top Menu>:
2
The security indicator on the monitor
panel flashes when the vehicle ignition
is off.
To cancel, select [OFF].
English 7
Component names and functions
DDX790/DDX770/DDX7070BT
Screen (Touch panel)Monitor panel
1 Reset button/Power indicator/Security
indicator
• Resets the unit. (☞ page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is
activated. (☞ page 7)
2 ATT button (Press)
• Attenuates the sound.
V.OFF button (Hold)
• Turns off/on the screen. (☞ page 12)
3 VOLUME
• Decreases the volume.
4 VOLUME (up) button (☞ page 11)
• Increases the volume.
5 AUD button (Press)
• Displays the <Tone> screen. (☞ page
43)
R-CAM button (Hold)
• Displays the picture from the rear view
camera.
(down) button (☞ page 11)
6 AV button (Press)
• Displays the current source screen.
AV OUT button (Hold)
• Selects the AV source for external
monitor or amplifier.
7
MENU button
• Turns off the power. (Hold)
• Turns on the power. (Press)
• Displays the <Top Menu> screen.
(Press) (☞ page 13)
8 TEL button (Press)
• Displays the <Handsfree> screen. (☞
page 60)
VOICE button (Hold)
• Activates voice dialing. (☞ page 60)
9 0 (Eject) button
• Ejects the disc (Tilts the monitor panel
fully).
• Opens/Closes the monitor panel.
p Remote sensor
Caution on the volume setting:
Digital devices produce very little noise
compared with other sources. Lower
the volume before playing these digital
sources to avoid damaging the speakers
by sudden increase of the output level.
8 English
You can change the color of the buttons
on the monitor panel. (☞ page 45)
DDX470/DDX4070BT/DDX370/DDX3070
Screen (Touch panel) Monitor panel
1 Loading slot
2 0 (Eject) button
• Ejects the disc.
3 Reset button/Power indicator/Security
indicator
• Resets the unit. (☞ page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is
activated. (☞ page 7 )
4 Remote sensor
5
MENU button
• Turns off the power. (Hold)
• Turns on the power. (Press)
• Displays the <Top Menu> screen.
(Press) (☞ page 13)
6 AV/AV OUT button
• Displays the current source screen.
(Press)
• Selects the AV source for external
monitor or amplifier. (Hold)
7 For DDX470/DDX4070BT:
VOL/ATT/AUD knob (☞ page 11)
• Attenuates the sound. (Press)
• Adjusts the audio volume. (Turn)
• Displays the <Tone> screen. (Hold) (☞
page 43)
For DDX370/DDX3070:
VOL/ATT knob (☞ page 11)
• Attenuates the sound. (Press)
• Adjusts the audio volume. (Turn)
8 For DDX470/DDX4070BT :
TEL/VOICE button
• Displays the <Handsfree> screen.
(Press) (☞ page 60)
• The function of the button when held
varies depending on the <TEL Key
Long Press> setting (☞ page 53 ).
For DDX370/DDX3070 :
AUD/V.OFF button
• Displays the <Tone> screen. (Press) (☞
page 43)
• The function of the button when held
varies depending on the <AUD Key
Long Press> setting (☞ page 53).
English 9
Setting the clock
1 Display the <Top Menu>
screen.
On the source control screen:
2 Display the <Setup> screen.
3 Display the <Clock> screen.
4 Set the clock time.
NAV *
Radio Data
System
OFF Sets the clock manually.
When selecting <OFF>:
Adjust the hour
1
Adjust the minute
2
[Reset]: Sets the minute to “00.”
Synchronizes the
clock time with the
connected navigation
unit.
Synchronizes the clock
time with FM RBDS.
(☞ below)
Example:
AM 3:00 – AM 3:29 = AM 3:00
AM 3:30 – AM 3:59 = AM 4:00
10 English
5 Finish the procedure.
* Only for DDX7070BT/DDX4070BT/DDX3070.
Appears only when the navigation unit is
connected.
Common operations
Turning on the power
DDX790/DDX770/DDX7070BT
DDX470/DDX4070BT/
DDX370/DDX3070
Turning off the power
DDX790/DDX770/
DDX7070BT
(Hold)
DDX470/DDX4070BT/
DDX370/DDX3070
(Hold)
Adjusting the panel angle
(Only for DDX790/DDX770/DDX7070BT )
You can change the panel angle.
1 Select an angle (0 – 6).
Adjusting the volume
To adjust the volume (00 to 35)
DDX790/DDX770/DDX7070BT
IncreaseDecrease
DDX470/DDX4070BT/DDX370/DDX3070
IncreaseDecrease
To attenuate the sound
DDX790/DDX770/DDX7070BT
DDX470/DDX4070BT/
DDX370/DDX3070
The ATT indicator lights up.
To cancel the attenuation, press the same
button again.
To set the current position as the power
off position, select [Memory].
English 11
Putting the unit in standby
1
2
Turning off the screen
DDX790/DDX770/
DDX7070BT
DDX470/DDX4070BT *
DDX370/DDX3070
1
2
*
(Hold)
(Hold)
(Hold)
The screen is turned off.
To turn on the screen, press
MENU.
• You can also turn on the screen by
touching the display.
1
*
This operation works only when <TEL Key Long
Press> is set to [V-OFF]. (
2
*
This operation works only when <AUD Key
Long Press> is set to [V-OFF]. (
☞ page 53 )
☞ page 53 )
12 English
Switching screens
Source control screen
• Pressing MENU
on the monitor
panel also displays
<Top Menu>.
Only for DDX7070BT/DDX4070BT/DDX3070: Displays the
navigation screen. *
1
(☞ page 42)
1
*
Appears only when
a navigation unit is
connected.
<Top Menu>
• Changes the AV source.
<Setup>
Changes the detailed settings.
• Displays the <Setup> screen.
☞ page 15
Changes the page
• You can arrange the items to display
on the <Top Menu> screen on
<Menu Customize> in <Display>
setting. (☞ page 51)
Press [
screen.
] to return to the previous
Touch screen operation
Displays the video control menu while playing a video.
Goes to the previous
chapter/track.*
2
Displays the source control screen while playing a video.
• The operation buttons disappear by touching the screen or when no operation is done for
about 5 seconds.
2
*
Not available for video from an external component and rear view camera.
Goes to the next chapter/
2
track.*
English 13
AV SOURCE OPERATIONS
Selecting the playback source
• To display all sources and items, ☞ page 15.
• You can change the items (other than
[SETUP]) to display on the <Top Menu>
screen. (☞ page 15)
NAV
*1 (☞ page 42)
Displays the navigation screen when a navigation unit is
connected.
DISC
(☞ page 16)
TUNER
(☞ page 28)
iPod
*2 (☞ page 25)
USB
(☞ page 23)
PANDORA
SiriusXM
TEL
Bluetooth
*3 (☞ page 38)
*3 *4 (☞ page 31)
*5(☞ page 60)
*5 (☞ page 65)
AV-IN 1/AV-IN 2
(☞ page 41)
OEM Features
*2
*4
Plays a disc.
Switches to the radio broadcast.
Plays an iPod/iPhone.
Plays files on a USB device.
Switches to the Pandora broadcast.
Listen to SiriusXM™ channels.
Displays the phone control screen.
Plays a Bluetooth audio player.
Switches to an external component connected to AV-IN1 and
iPod/AV-IN2 input terminals.
Switches to the sources via connected ADS adapter.
(☞ page 83)
1
Only for DDX7070BT/DDX4070BT/DDX3070. When no navigation unit is connected, “No Navigation”
*
appears.
2
*
Select an appropriate input setting on <AV Input>. (☞ page 52 )
3
*
Only for DDX790/DDX770/DDX470/DDX370.
4
*
Only for DDX370: select an appropriate input setting on <External BUS>. (☞ page 52)
5
*
Only for DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT .
Displaying the source control screen
On video playback screen
• The operation buttons disappear by
touching the screen or when no operation
is done for about 5 seconds.
14 English
Displaying all sources and
items
On <Top Menu>:
DDX790/DDX770/DDX470
Customizing the <Top
Menu> screen
You can arrange the items to display on the
<Top Menu> screen.
1 On <Top Menu>:
2
DDX7070BT/DDX4070BT
DDX370
DDX3070
3 Select the position to place
the icon (1), then select the
item you want to display on
the selected position (2).
4 Repeat step 3 to place icons
for other items.
English 15
Disc operations
Playing a disc
• If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change
the source or eject the disc.
Inserting a disc
DDX790/DDX770/DDX7070BT
Ejecting a disc
DDX790/DDX770/DDX7070BT
Label side
DDX470/DDX4070BT/DDX370/DDX3070
Label side
The source changes to “
starts.
• The IN indicator lights up while a disc is
inserted.
• If “
” appears on the screen, the unit
cannot accept the operation you have
tried to do.
– In some cases, without showing “
operations will not be accepted.
• When playing back a multi-channel
encoded disc, the multi-channel signals
are downmixed to stereo.
DISC
” and playback
,”
DDX470/DDX4070BT/DDX370/DDX3070
• You can eject a disc when playing another
AV source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically
inserted again into the loading slot to
protect it from dust.
When removing a disc, pull it horizontally.
Closing the monitor panel
(Only for DDX790/DDX770/
DDX7070BT )
After removing the disc, press 0 (eject)
button again. The monitor panel closes.
16 English
Playable disc types
Disc type Recording format, file type, etc. Playable
DVD DVD-Video *
Region Code:
• For DDX790/DDX770/DDX470/DDX370: 1
• For DDX7070BT/DDX4070BT/DDX3070: 4
DVD-Audio/DVD-ROM
DVD Recordable/
Rewritable
(DVD-R/-RW *
2
, +R/+RW *3)
• DVD Video: UDF bridge
• DVD-VR
5
• DivX *
/MPEG1/MPEG2/
JPEG/MP3/WMA/WAV/
AAC: ISO 9660 level 1,
level 2, Romeo, Joliet
DVD-Video
DVD-VR *
DivX *5/MPEG1/MPEG2
JPEG
MP3/WMA/WAV/AAC
MPEG4/DVD+VR/DVD-RAM
Dual Disc DVD side
Non-DVD side
CD/VCD DTS-CD/Audio CD/CD Text (CD-DA)
VCD (Video CD)
SVCD (Super Video CD)/CD-ROM/CD-I (CD-I
Ready)
CD Recordable/
Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2,
Romeo, Joliet
CD-DA
VCD (Video CD)
DivX *
JPEG
MP3/WMA/WAV/AAC
MPEG4
1
*
If you insert a DVD Video disc of an incorrect Region Code, “Region code error” appears on the screen.
2
*
DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer
discs are not playable.
3
*
It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type
when a +R/+RW disc is loaded. +RW double layer discs are not playable.
4
*
This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).
5
*
Playable only for DDX7070BT/DDX4070BT/DDX3070.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be
recommended.
1
4
5
/MPEG1/MPEG2
English 17
Playback operations
To display the source control screen, ☞ page 14.
For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG
Media type Playing time
• DVD Video: Title no./Chapter no.
• DVD-VR: Program no. (or Playlist
no.)/Chapter no.*
• DivX/MPEG1/MPEG2: Folder no./
Track no.
• JPEG: Folder no./File no.
• VCD: Track no.
File type (for DivX/MPEG1/MPEG2/JPEG)
Playback mode
[ ]
[
]*
[3 8] Starts/pauses playback.
3
[7]*
[4] [¢] • Selects a chapter/track.
• For DivX/MPEG1/MPEG2/JPEG, the following buttons also appear:
[ ] [ ] Selects a folder.
Selects playback mode.
2
(☞ page 21)
Stops playback.
(Press)
• Reverse/forward search.*
(Hold)
[1] [¡] • Reverse/forward search
5
[MODE]*
4
[MENU] Displays the <Top Menu>
[ ]
1
during playback.*
4
• Plays back in slowmotion during pause.
Enters the <DISC Mode>
settings. (☞ page 22)
screen.
Displays the folder/track
list. (☞ page 19)
1
*
To display the Original Program/Playlist screen, ☞ page 20.
2
*
Does not appear for DVD/DVD-VR/JPEG.
3
*
Appears only for DVD/DVD-VR/VCD.
4
*
Search speed varies depending on the type of disc or file.
5
*
Does not appear for VCD.
18 English
For CD/MP3/WMA/WAV/AAC
While playing, the jacket picture is shown if the
file has the tag data including the jacket picture.
Media type
File type
Playback mode
• MP3/WMA/WAV/AAC: Folder no./Track no.
• CD: Track no.
Playback status (3: play / 8: pause )
Playing time
Track/file information
• Pressing [<] scrolls the
text if not all of the text
is shown.
[ ] [ ]
Selects playback mode.
(☞ page 21)
1
[
] *
Displays the folder/track list.
(☞ below)
[3 8] Starts/pauses playback.
] [ ]*1Selects a folder.
[
1
*
Does not appear for CD.
2
*
Search speed varies depending on the type of disc or file.
Selecting folder/track on the list
Returns to the
Returns to the root folder
Changes the page
upper layer
Plays tracks/files in
the folder
[4] [¢] Selects a track.
[1] [¡] Reverse/forward search.*
2
[MODE] *1Enters the <DISC Mode>
settings. (☞ page 22)
[MENU] Displays the <Top Menu>
screen.
Playing Recordable/Rewritable discs
• This unit can recognize a total of 5 000
files and 250 folders (a maximum of 999
files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some discs or files may not be played
back due to their characteristics or
recording conditions.
English 19
Video menu operations
You can display the video menu screen
during video playback.
• Available items on the screen differ
depending on the types of the loaded disc
and playback files.
• The operation buttons disappear by
touching the screen or when no operation
is done for about 5 seconds.
• The screen for MPEG1/MPEG2 differs from
the above.
ZOOM Displays the picture size
Aspect
Picture
Adjust
Audio Selects the audio type.
Subtitle Selects the subtitle type.
Angle Selects view angle.
MENU Displays the disc menu
T MENU Displays the disc menu
Highlight Switches to the direct disc
CUR Displays the menu/playlist/
selecting screen. (☞ page 48)
Selects the aspect ratio. (☞
page 48)
Displays the picture
adjustment screen. (☞
page 47)
• For DVD-VR: Selects the
audio channel (ST: stereo,
L: left, R: right).
(DVD)/playlist (DVD-VR).
(DVD)/original program
(DVD-VR).
menu mode. Press the target
item to select.
• To restore the screen, press
AV on the monitor panel.
original program item
selecting screen.
• [5] [∞] [2] [3]: Selects an
item.
– For DivX only
[2] [3]: Skips back or
forward by about 5
minutes.
• [ENTER]: Confirms the
selection.
• [RETURN]: Returns to the
previous screen.
20 English
Only for VCD
1
• To deactivate the PBC function, press [7]
then the direct selecting buttons to select
a track number.
Selecting playback mode
For DVD/DVD-VR
Selects Repeat playback mode
2
Direct selecting buttons (☞ below)
ZOOM Displays the picture size
Aspect
Picture
Adjust
MENU Displays the disc menu.
Audio Selects the audio channel (ST:
Direct Displays/hides the direct
Return Displays the previous screen or
• To select a track directly
selecting screen. (☞ page 48)
Selects the aspect ratio. (☞
page 48)
Displays the picture adjustment
screen. (☞ page 47)
stereo, L: left, R: right).
selecting buttons. (☞ below)
the menu.
For VCD (without PBC)/CD/DivX/MPEG1/
MPEG2/MP3/WMA/WAV/AAC
Selects Repeat playback mode*
Selects Random playback
mode*
* You cannot activate the repeat mode and the
random mode at the same time.
• Each time you press the button,
the playback mode changes. (The
corresponding indicator lights up.)
– Available items differ depending on the
types of loaded disc and playback file.
Indicator Playback mode
C-REP Repeats current chapter.
T-REP Repeats current title/
program.
REP Repeats current track.
FO-REP Repeats all tracks of the
current folder.
RDM Randomly plays all tracks.
FO-RDM Randomly plays all tracks of
current folder, then tracks of
next folders.
To cancel, press the button repeatedly until
the indicator disappears.
– When you enter a wrong number, press
[Direct/CLR] to delete the last entry.
English 21
<DISC Mode> settings
Disc Setup items Selectable setting/item Initial: Underlined
Menu
Language
Subtitle
Language
Audio
Language
Down Mix When playing back a multi-channel disc, this setting affects the
For DVD/DVD-VR
Dynamic
Range Control
Screen Ratio Select the monitor type to watch a wide screen picture on the
For discs
except VCD/CD
File Type Select the playback file type when a disc contains different types of
For discs containing
audio/video/picture files
Select the initial disc menu language; Initial English (☞ page 73).
Select the initial subtitle language or erase the subtitle (OFF)
(☞ page 73).
• Initial for DDX7070BT/DDX4070BT/DDX3070: English, for DDX790/
DDX770/ DDX470/DDX370: OFF
Select the initial audio language; Initial English (☞ page 73).
signals reproduced through the front and/or rear speakers.
♦ Dolby
Surround
♦ Stereo
You can change the dynamic range while playing Dolby Digital
software.
♦ Wide
♦ Normal
♦ Dialog
external monitor.
♦ 16:9 ♦ 4:3 LB (Letterbox) ♦ 4:3 PS (PanScan)
files.
♦ Audio
♦ Still Image
♦ Video
♦ Audio&Video
• For playable file types, ☞ page 17.
• If the disc contains no files of the selected type, the existing files
are played in the following order: audio, video, then still image.
: Select this to enjoy multi-channel surround
audio with Dolby Surround.
: Normally select this.
: Select this to enjoy a powerful sound at a low
volume level with its full dynamic range.
: Select this to reduce the dynamic range a
little.
: Select this to reproduce the movie dialog
more clearly.
: Plays back audio files.
: Plays back JPEG files.
: Plays back DivX/MPEG1/MPEG2 files.
: Plays back audio files and DivX/MPEG1/MPEG2
files.
22 English
USB operations
Playing a USB device
• This unit can play JPEG/DivX*/MPEG1/
MPEG2/MP3/WMA/WAV/AAC files stored in
a USB mass storage class device.
• This unit can recognize a total of 5 000 files
and 250 folders (a maximum of 999 files per
folder).
• Make sure all important data has been
backed up to avoid losing the data.
*
Playable only for DDX7070BT/DDX4070BT/
DDX3070.
Connecting a USB device
You can connect a USB mass storage class
device such as a USB memory, Digital Audio
Player etc. to the unit.
• You cannot connect a computer or
portable HDD to the USB input terminal.
• To connect a USB device,
When a USB device is connected...
The source changes to “
starts.
• All tracks in the USB device will be played
repeatedly until you change the source.
To disconnect the USB device safely
Press [0], then disconnect the USB device
after “No Device” appears.
☞
page 82 .
USB
” and playback
Cautions:
• This unit may not play back files in a
USB device properly when using a USB
extension cable.
• USB devices equipped with special
functions such as data security functions
cannot be used with the unit.
• Do not use a USB device with 2 or more
partitions.
• Depending on the shape of the USB
devices and connection ports, some USB
devices may not be attached properly or
the connection might be loose.
• This unit may not recognize a memory card
inserted into the USB card reader.
• When connecting with a USB cable, use the
USB 2.0 cable.
• The maximum number of characters:
– Folder names : 50 characters
– File names : 50 characters
• Avoid using the USB device if it might
effect driving safety.
• Do not pull out and connect the USB
device repeatedly while “Reading...” is
shown on the screen.
• Electrostatic shock at connecting a USB
device may cause abnormal playback of
the device. In this case, disconnect the USB
device then reset this unit and the USB
device.
• Operation and power supply may not work
as intended for some USB devices.
• Do not leave a USB device in the car,
or expose to direct sunlight or high
temperature to avoid deformation or
damage to the device.
English 23
• To display the source control screen, ☞ page 14.
• To change settings for video playback, ☞ page 20.
• DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC: Folder no./Track no.
Only for MP3/WMA/
WAV/AAC: While
playing, the jacket
picture is shown if
the file has the tag
data including the
jacket picture.
[ ]
Selects repeat playback mode.
• REP: Repeats the current track.
• FO-REP: Repeats all tracks in
the current folder.
Selects random playback mode.
[
]
• RDM: Randomly plays all tracks.
• FO-RDM: Randomly plays all
tracks in the folder.
[0] Press this button before
disconnecting. (☞ page 23)
• JPEG: Folder no./File no.
*1*
*1*
File type
2
2
Playback mode
[ ]
[3 8] Starts/pauses playback.
[4] [¢] Selects a track.
[1] [¡] Reverse/forward search.*
[ ] [ ] Selects a folder.
[MODE] Enters the <USB Mode>
[MENU] Displays the <Top Menu>
Playback status
(3: play / 8: pause )
Playing time
Track/file information
(for MP3/WMA/WAV/
AAC)
• Pressing [<] scrolls
the text if not all of
the text is shown.
Displays the folder/track list.
(☞ page 19)
settings. (☞ below)
screen.
• Available items differ depending on the types of playback file.
1
*
To cancel random or repeat mode, press the button repeatedly until the indicator disappears.
2
*
You cannot activate the repeat mode and the random mode at the same time.
3
*
Search speed varies depending on the type of disc or file.
3
<USB Mode> settings
Setting <Screen Ratio>
Select the monitor type to watch a wide
screen picture on the external monitor.
16:9 4:3 LB
(Letterbox)
Setting <Drive Select>
Press [Next]. Switches between internal and
external memory source of the connected
device (such as mobile phone).
24 English
4:3 PS
(PanScan)
Setting <File Type>
Audio Plays back audio files.
Still Image Plays back JPEG files.
Video Plays back DivX/MPEG1/
MPEG2 files.
Audio&Video Plays back audio files and
DivX/MPEG1/MPEG2 files.
• If the USB device contains no files of the
selected type, the existing files are played
in the following order: audio, video, then
still image.
Listening to the iPod/iPhone device
Preparation
• Connect iPod/iPhone. (☞ page 82 )
– When connecting iPhone/iPod touch,
turn off App beforehand; otherwise
the playback may not be started after
connection.
• Use the following cables:
–
To watch the video and to listen to
the music (analog): USB Audio and
Video cable for iPod/iPhone—
(optional accessory)
– To listen to the music (digital): USB
Audio cable for iPod/iPhone—KCA-iP102
(optional accessory)
• Select appropriate input settings on <AV
Input> according to the connection
method (☞ the right column)
• Do not use extension cables.
iPod/iPhone that can be connected to this
unit:
Made for
– iPod with video
– iPod classic
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
KCA-iP202
Settings for iPod playback
When the source is “
iPod
”...
1
2
Audiobooks Selects the speed of
audio books.
Artwork Shows/hides the iPod
artwork.
Setting <AV Input> for iPod/iPhone
playback
You can change the setting only when
[STANDBY] is selected on <Top Menu>.
(☞ page 12)
1 On <Top Menu>:
2
AV-IN2 Select this when connecting
the iPod/iPhone using the
USB Audio cable for iPod/
iPhone.
iPod Select this when connecting
the iPod/iPhone using the
USB Audio and Video cable
for iPod/iPhone
English 25
iPod/iPhone playback operations from the unit
• To display the source control screen, ☞ page 14.
• To change settings for video playback, ☞ page 20.
While playing,
Artwork (the
picture displayed
on the screen
of iPod/iPhone)
is shown if the
song contains the
Artwork.*
1
Track no./total track no.
[MODE] Enter the <iPod Mode>
settings. (☞ page 25)
[38] Starts/pauses playback.
] Selects Repeat playback
[
mode. *
2
• REP: Functions the same as
“Repeat One.”
[
Selects Random playback
]
mode. *
2
• RDM: Functions the same as
“Shuffle Songs.”
Playback mode
Playback status (3: play / 8: pause )
Playing time
Song/video
information
• Pressing [<] scrolls
the text if not all of
the text is shown.
[ ]
[4]
Displays the audio/video file
list. (☞ page 27)
Selects an audio/video file.*
[¢]
[1]
Reverse/forward search.
[¡]
[APP] Select to control playback from
the iPod/iPhone—iPod/iPhone
control mode.*
[MENU] Displays the <Top Menu>
screen.
• A-RDM: Functions the same
as “Shuffle Albums.”
1
For changing the Artwork display setting, ☞ page 25.
*
2
*
To cancel random or repeat mode, press the button repeatedly until the indicator disappears.
Not available in iPod control mode. (
3
*
Resume playback is unavailable for video files.
4
*
When using iPod with video, you can control playback only from the unit.
☞ page 27)
• When you turn on this unit, the iPod/iPhone is charged through the unit.
• The text information may not be displayed correctly.
4
(☞ page 27)
3
• For some iPod/iPhone models, the performance may be abnormal or unstable during
operation. In this case, disconnect the iPod/iPhone device, then check its condition.
If the performance is not improved or is slow, reset your iPod/iPhone.
• For the latest compatible list and software version of iPod/iPhone, see:
www.kenwood.com/cs/ce/ipod
26 English
Selecting an audio/video file
from the menu
1
2 Select the menu (audio or
video) (1), a category (2),
then a desired item (3).
• Select the item in the selected layer
until a desired file starts playing.
Audio menu:
Returns to the top layer
Switches between audio
) and video ( )
(
Returns to the
previous layer
Controlling playback from
the iPod/iPhone
You can play back the audio/video files or use
App by operating iPod/iPhone itself instead
of the unit.
• When you are using Garmin StreetPilot®
Onboard, the screen appears. For Garmin
StreetPilot® Onboard for iPhone, visit the
Garmin web site: www.garmin.com
Garmin App:
Changes the page
Video menu:
Switches between audio ( ) and video ( )
• Available categories differ depending on
the type of your iPod/iPhone.
Starts folder playback
• The current position of your vehicle
appears on the map. When the vehicle
runs, the map scrolls.
• The screens of the iPhone and unit are
not the same.
• To return to the normal mode, press [APP].
English 27
Listening to the radio
Band no./preset no./the
station frequency currently
tuned in
Text information
• Pressing [<] scrolls the text if
not all of the text is shown.
ST/MONO indicator
Press to switch the information between Radio Text, Radio Text Plus, and PTY code.
TI indicator
Seek mode indicator
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal
strength.
[P1] – [P6] • Selects a stored station.
(Press)
• Stores the current station.
(Hold)
[MODE] Enters the <Tuner Mode>
[PTY] * Enters the PTY search mode.
(☞ page 30)
[AM] Selects AM band.
[FM] Selects FM band.
settings. (☞ page 29)
[TI] Activates/deactivates TI
standby reception mode.
(☞ page 30)
[MONO] * Activates/deactivates
monaural mode for better FM
reception. (Stereo effect will
be lost.)
• The MONO indicator lights
up while monaural mode is
activated.
[TEXT] Displays/hides the
information of the current
[SEEK] Changes the seek mode.
• AUTO1 : Auto Search
• AUTO2 : Tunes in stations
in memory one after
another.
• MANU: Manual Search
[4]
[¢]
Searches for a station.
• The search method differs
according to the selected
seek mode. (☞ above)
[MENU] Displays the <Top Menu>
screen.
station. (☞ page 29)
*
Appears only when FM is selected as the source.
28 English
Loading...