Kenwood CRWNV-701 Service manual

CENTER SPEAKER ,SURROUND SPEAKER ,SUBWOOFER SYSTEM
CRW-NV701
SERVICE MANUAL

EXTERNAL VIEW :SURROUND SPEAKER

2000-6/B51-5643-00 (Z/K)2474
Grille assy (B06-1475-08):L (B06-1476-08):R
Binding head tapping screw (N44-3514-45)x4
Dressing panel (A21-3328-08):L (A21-3329-08):R
Fullrange (T07-0489-05)

DISASSEMBLY FOR REPAIR

How to remove the speaker unit
1. Remove the front dressing panel ass’y before replace the speaker.(Insert the screw driver into the gaps of the silver panel from bottom side.)
2. You can disassemble the front dressing panel ass’y if removing the screws from its back side.
Binding head tapping screw (N44-3012-46)x4
For panel assy
Dressing panel (A21-3326-08):L (A21-3327-08):R
Mounting hardware (J21-8824-05) Binding head tapping screw (N44-3014-45)x2
CRW-NV701
Push terminal (E21-0297-05)

SPECIFICATIONS

Enclosure ..........................................................................................Acoustic air suspension type
Impedance ................................................................................................................................6
Maximum input level............................................................................................................50 W
Dimensions ..................................................................................................W: 177mm (6-15/16")
Net Weight .................................................................................................1.3 kg (2.87 lb / piece)
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Full range .............................................................................................100 mm, (4 in) cone type
H: 150mm (5-7/8") D: 166mm (6-9/16")
CRW-NV701
CRW-NV701
CRW-NV701

EXTERNAL VIEW/SPECIFICATIONS

CENTER SPEAKER: MECHANICAL 2-WAY SPEAKER SYSTEM

Full range (T07-0488-05)x2
Binding head tapping screw (N44-3514-45)x8

SPECIFICATIONS

Grille assy (B06-1474-08)
Dressing panel (A21-3325-08)
Dressing panel (A21-3324-08)
Binding head tapping screw (N44-3012-46)x6
For panel assy
Enclosure ......................................................Acoustic air suspension Magnetically shielded type
Full range ..........................................................................................80 mm, (3 in) cone type x2
Impedance ................................................................................................................................6
Maximum input level............................................................................................................50 W
Dimensions ...................................................................................................W: 280mm (11")
Net Weight .................................................................................................2.3 kg (5.07 lb / piece)
Push terminal (E21-0297-05)
H: 130mm (5-1/8") D: 166mm (6-9/16")
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

SUB WOOFER: WOOFER SPEAKER SYSTEM

Grille assy (B06-1477-08)
Dressing panel (A21-3330-08)

SPECIFICATIONS

Binding head tapping screw (N44-4020-45)x4
Woofer (T10-0957-05)
Enclosure ..............................................................................................................Bass-reflex type
Woofer ............................................................................................160 mm, (6-1/2 in) cone type
Impedance ................................................................................................................................6
Maximum input level............................................................................................................50 W
Dimensions ..................................................................................................W: 280mm (11")
Net Weight ...............................................................................................5.6 kg (12.35 lb / piece)
Push terminal (E21-0297-05)
H: 200mm (7-7/8") D: 345mm (13-9/16")
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2
Loading...
+ 2 hidden pages