CM020 series
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
time
1Wash the parts: see ‘care and
cleaning’.
2 Run two full tanks of water
(without coffee) through the coffee
maker to clean it out. See ‘to
make coffee’.
key
cup warming tray
lid handle
paper filters
permanent filter (if supplied)
filter holder
anti-drip valve
water tank (750 mls)
on/off button with indicator
hotplate
carafe
measuring spoon
to make coffee
1Lift the lid using the handle at
the front of the coffee maker.
2 Fill the tank with the desired
amount of water. The water level
must be between the 2 and 6 cup
marks. Do not fill above the MAX
level.
●
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use
warm or fizzy water.
3Ensure the filter holder is
positioned correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to
taste).
5 Close the lid and put the carafe
on the hotplate. NOTE: The lid
must be fitted to the carafe
in order to operate the antidrip valve.
6 Plug in and switch on.
7 Don’t remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
● The hot plate will keep your coffee
hot, but the sooner you drink it,
the better it will taste.
● If you have not used the
appliance for a while, run one full
tank of water (without coffee)
through to clean it out.
care & cleaning
●
Always switch off, unplug and
allow to cool before cleaning.
●
Don’t wash parts in the
dishwasher.
carafe and lid, filter holder
and permanent filter holder
●
Wash, then dry.
body
●
Wipe with a damp cloth, then dry.
Don’t use abrasives - they’ll
scratch the plastic and metal
surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean
it out.
4Wash the parts.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
●
using your appliance or
●
servicing, spare parts or repairs (in
or out of guarantee)
call Kenwood customer care on
023 92392333. Have your
model number ready - it’s on
the underside of the coffee maker.
For spare parts call
0870 241 3653.
●
other countries
Contact the shop where you
bought your appliance.
guarantee
If your coffee maker goes wrong
within one year from the date you
bought it, we will repair it (or
replace it if necessary) free of
charge provided:
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
19118/1