햲
햳
햴
햶
햷
햸
햻
햽
햵
햹
햺
Kenwood Coffee Experience
ere at Kenwood we share your appreciation for coffee and that’s why we have
H
nsured that this filter machine will enrich your experience for enjoying filtered
e
coffee. Unfortunately not all coffee machines are able to brew coffee the ways it’s
meant to be. In fact it’s a fine art to deliver the perfect cup; a combination of
using the right ingredients and the right equipment.
Filter coffee should be brewed at 92-96°C, served at +80°C taking no longer
than 6 minutes to brew a full carafe. We have carefully calibrated our machines
to do precisely this so you can guarantee you have the right equipment to deliver
a perfectly balanced brew.
Filter coffee is one of the many ways to enjoy coffee, below are some
recommendations to perfect the ultimate filter coffee experience to serve you,
family and friends.
The Water ~ Your coffee is around 98-99% water so it’s important to ensure you
use fresh filtered water. We recommend using a water filter as it will reduce
limescale and prolong the use of your coffee maker.
The Coffee ~ This machine will optimise the flavour of medium ground coffee, to
deliver full body, aroma and taste. Be sure before you buy that the coffee is
suitable for a filter machine. Or if you grind your own beans set the grinder to
medium coarseness. If the particles are too small, water will pass through the
filter too slowly resulting in ‘over-extraction’; your coffee will taste bitter. If
particles are too large, water will pass through too quickly resulting in ‘underextraction’; your coffee will taste weak and watery.
The Measurements ~ To brew a perfectly balanced cup we recommend to use
7 grams or 1Tbsp of ground coffee per cup. Use the measuring spoon provided
to do this accurately. Coffee will taste better when fresh so we recommend
drinking within 30 minutes of brewing, any longer and taste begins to deteriorate.
The Maintenance ~ Use paper filters or a permanent filter either type is suitable
to produce great coffee. We recommend that you rinse your permanent filter with
water after every use as any residual detergent could taint your coffee. Dispose
of the used grounds immediately after use to prevent drip through of unwanted
flavours trapped in the used coffee grounds. Try to keep your coffee machine
clean, especially the shower head as this will help to prolong your machine and
maintain perfect brewing.
We hope you will enjoy coffee brewed from Kenwood.
before using your Kenwood
ppliance
a
●
Read these instructions carefully
and retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Watch out for steam, never
lift the tank lid during the
brewing cycle.
●
Never touch the hotplate or
surrounding area.
●
Always lift the lid using the
handle at the front 햳.
●
Do not touch hot parts including
the cup warming tray 햲.
●
Never let the cord hang down
where a child could grab it.
●
Never use a damaged appliance.
Get it checked or repaired: see
‘service and customer care’.
●
Never put the appliance in water or
let the cord or plug get wet - you
could get an electric shock.
●
Unplug:
●●
before filling with water
●●
before cleaning
●●
after use.
●
Never leave the appliance on
unattended.
●
Do not let the cord touch hot
parts.
●
Always make sure there is water in
the tank before switching on.
●
This coffee maker is only suitable
for use with the type of carafe
supplied.
●
Do not leave the appliance
switched on with an empty carafe
on the hotplate.
●
Never put the carafe in the
microwave.
●
This appliance is not intended for
se by persons (including children)
u
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
●
Children should be supervised to
ensure that they do not play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of your appliance.
Important (UK) only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live.
● The appliance must be protected
by a 13A approved (BS1362) fuse.
● WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
● For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
● If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
irective 2004/108/EC on
d
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
time
1 Wash the parts: see ‘care and
cleaning’.
2 Run two full tanks of water
(without coffee) through the coffee
maker to clean it out. See ‘to
make coffee’.
key
햲 cup warming tray
햳 lid handle
햴 paper filters
햵 permanent filter (if supplied)
햶 filter holder
햷 anti-drip valve
햸 water tank (750 mls)
햹 on/off button with indicator
햺 hotplate
햻 carafe
햽 measuring spoon
to make coffee
1 Lift the lid using the handle 햳 at
the front of the coffee maker.
2 Fill the tank with the desired
amount of water. The water level
must be between the 2 and 6 cup
marks. Do not fill above the MAX
level.
●
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use
warm or fizzy water.
3 Ensure the filter holder is
positioned correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to
taste).
5 Close the lid and put the carafe
n the hotplate. NOTE: The lid
o
must be fitted to the carafe
in order to operate the antidrip valve.
6 Plug in and switch on.
7 Don’t remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
● The hot plate will keep your coffee
hot, but the sooner you drink it,
the better it will taste.
● If you have not used the
appliance for a while, run one full
tank of water (without coffee)
through to clean it out.
care & cleaning
●
Always switch off, unplug and
allow to cool before cleaning.
●
Don’t wash parts in the
dishwasher.
carafe and lid, filter holder
and permanent filter holder
●
Wash, then dry.
body
●
Wipe with a damp cloth, then dry.
Don’t use abrasives - they’ll
scratch the plastic and metal
surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean
it out.
4 Wash the parts.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
●
using your appliance or
●
servicing, spare parts or repairs (in
or out of guarantee)
콯 call Kenwood customer care on
023 92392333. Have your
model number ready - it’s on
the underside of the coffee maker.
For spare parts call
0870 241 3653.
●
other countries
Contact the shop where you
bought your appliance.
guarantee
If your coffee maker goes wrong
within one year from the date you
bought it, we will repair it (or
replace it if necessary) free of
charge provided:
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
CM020 series
19118/2