Kensington SE 2.0 User Manual

PocketHUB SE 2.0
User Manual

High Speed, Portable 4-Port
USB 2.0 Hub

READ FIRST!

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 1

To connect to a Do this:

USB 2.0 port • Plug the cable into your computer’s

USB port. You will enjoy full USB 2.0
HI-SPEED performance.

• Connect the small 5-pin Type B mini
USB connector into the USB hub. This
cable is included in the package.

Registering Online

Take a minute to register your Kensington input device.
Registered customers are eligible to receive free technical
support, notification of new products, and software
updates. To register, start your Web browser and go to:

www.register.kensington.com

Connecting your PocketHUB SE 2.0

You do not need to turn off your computer before connect­ing or disconnecting a USB device. The included AC power
adapter must be used for maximum performance.

To connect to a Do this:

USB 1.1 port • Plug the cable into your computer’s

USB port. The hub will function
on a USB 1.1 por t but only at
USB 1.1 speeds.

• Connect the small 5-pin Type B mini
USB connector into the USB hub. This
cable is included in the package.

Note to Windows XP users: The system
will warn you: HI-SPEED USB DEVICE

Plugged into non-HI-SPEED USB Hub.

Click ok.

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 2

Technical Support Tips

• You may find the answer to your problem in the
Frequently Asked Questions (FAQs) in the Support area of
the Kensington Web site http://www.kensington.com.

• Call from a phone where you have access to your
computer and product.

• Please be prepared to provide the following information:
– Name, address and telephone number
– The name of the Kensington product
– Make and model of your computer
– Your system software and version
– Symptoms of the problem and what led to them

Technical Support

Technical support is available to all registered users of
Kensington products. There is no charge for technical
support except long distance charges where applicable.
Technical Support Contact information can be found on
the inside back cover of this manual.

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 4

shall not be liable for any incidental or consequential
damages. Implied warranties or merchantability and
fitness for a particular purpose on this product are limited
in duration to the duration of this warranty. Some states/
countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Some states/
countries do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to
you. This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state
and country to country.

1 Year Warranty

KENSINGTON TECHNOLOGY GROUP ("KENSINGTON")
warrants this PRODUCT against defects in material and
workmanship under normal use and service for one year
from the original date of purchase. KENSINGTON, at its
option shall repair or replace the defective unit covered
by this warranty. Please retain the dated sales receipt as
evidence of the date of purchase. You will need it for any
warranty service. In order to keep this warranty in effect,
the product must have been handled and used as pre­scribed in the instructions accompanying this warranty.
This warranty does not cover any damage due to accident,
misuse, abuse, or negligence. This warranty is valid only if
the product is used on the computer or system specified on
the product box. Please check product box for details, or
call technical support. Repair or replacement, as provided
under this warranty, is your exclusive remedy. KENSINGTON

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 6

Declaration of Conformity Compliance Statement for
Kensington PocketHUB SE 2.0

This Kensington PocketHUB SE 2.0 model no. 33141
complies with Part 15 of the FCC Rules. Operation is
subject to two conditions: (1) This device may not cause
harmful interference, and, (2) this device must accept
any interference received, including interference that may
cause undesired operation. As defined in Section 2.909
of the FCC Rules, the responsible party for this device is:
Kensington Technology Group, 2000 Alameda de las Pulgas,
Second Floor, San Mateo, CA 94403 USA, 650-572-2700.

Federal Communications Commission Radio Frequency
Interference Statement

Note: This Kensington PocketHUB SE 2.0 model no. 33141
has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.

MODIFICATIONS: Modifications not expressly approved
by Kensington may void the user’s authority to operate
the device under FCC regulations and must not be made.

SHIELDED CABLES: In order to meet FCC requirements, all
connections to equipment using a Kensington input device
should be made using only the shielded cables provided.

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 8

Support by Telephone

Technical Support is available by telephone.
Please visit www.kensington.com for hours.

US and Canada 800-535-4242 or 650-572-2700
Mexico 52(55)5384-0620

Contacting Kensington

Troubleshooting information and answers to frequently
asked questions are available 24 hours a day on the
Kensington Web site at www.support.kensington.com.

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 10

Kensington Technology Group
2000 Alameda de las Pulgas, Second Floor
San Mateo, CA 94403 USA

www.kensington.com

ACCO Europe PLC
Gatehouse Road
Bucks, HP19 8DT, UNITED KINGDOM

ACCO Canada Inc., 5 Precidio Court
Brampton, Ontario L6S 6B7 CANADA

This manual is copyright © 2004 Kensington Technology Group, a division of ACCO Brands,
Inc. Any unauthorized copying, duplicating , or other reproduction of the contents hereof is
prohibited without written consent from Kensington Technology Group. All rights reserved.
07/04
Patents Pending. For full copyright information, please see the electronic MouseWorks Guide.
Kensington is a registered trademark of ACCO World Corporation. Windows is a registered
trademarks of Microsoft Corporation. All other registered and unregistered trademarks are
the sole property of their respec tive owners

.

901-1618-00

33141PocketHUB_SE_20 6/29/04 9:55 AM Page 12