Kenmore Elite 59675522400, 59675523400, 59675524400, 59675529400, 59675532400 Owner’s Manual
...
T
®
Bottom Freezer Refrigerator
use&_ureGuide
Refrigerador con congelador inferior
Guiudeus0yCu_dud00p_o33
RGfrigGrateur _ compartiment congGlateur infGrieur
Guided°u_H_su_one_d°÷n_re_ienopu_e65
"-trio
\
596.75522400,
596.75532400,
Part No. 12828112 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.seais.com
Form No. B/05/04 Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 Au Canada, www.sears.ca
596.75523400,
596.75533400,
596.75524400,
596.75534400,
596.75529400,
596.75539400,
Litho U.S.A.
=
Jnstamlation
Location
Measuring the Opening
Transporting Your Refrigerator
Leveling
Drawer Removal
................................................... 7-13
Pullout Freezer Drawer
Reinstallation of the Doors
Door Reversal
Handles
Connecting the Water Supply
Opening and Closing Your Fresh Food Doors
Temperature Controls ............................................ 14
Touch Temperature Controls
Fresh Food Features ........................................... 15-16
Shelves
Door Storage
Storage Drawers
Water FiJter .................................................. 18-20
Removal and Installation
General Use Conditions
Food Storage Tips
............................................ 21-23
Fresh Food Storage
Frozen Food Storage
Food Storage Chart
Care and Cleaning ............................................ 24-27
Refrigerator Cleaning Chart Replacing Light Bulbs
Removing Odors From Refrigerator Preparing for Vacation
Energy Saving Tips Preparing to Move
ImportnntSnfetyInstructions
Installer: Please leave this guide with this appliance.
Consumer: Please read and keep this Use & Care
Guide for future reference, it provides the proper use
and maintenance information.
In our continuing effort to improve the quality and
performance of our appliances, it may be necessary
to make changes to the appliance without revising
this guide.
To reduce risk of injury or death, follow basic
precautions, including the following:
IMPORTANT: Child entrapment and suffocation
are not problems of the past. Junked or abandoned
refrigerators are still dangerous - even if they sit out
for "just a few days." If you are getting rid of your old
refrigerator, please follow the instructions below to
help prevent accidents.
What You Need to Know About
Safety Instructions
Warning and Important Safety Instructions appearing in
this guide are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
installing, maintaining or operating appliance.
Always contact your dealer, distributor, service agent or
manufacturer about problems or conditions you do not
understand.
Recognize Safety Symbols, Words,
Labels
DANGER - Immediate hazards which WILL result
in severe personal injury or death.
WARNING - Hazards or unsafe practices which
COULD result in severe personal injury or death.
Before you throw away your old
refrigerator or freezer:
• Take off the doors.
• Leave the shelves in place so
children may not easily climb
inside.
This appliance is equipped with a three-prong
grounding plug for your protection against possible
electrical shock hazards. It must be plugged into a
grounding receptacle. Where a standard two-prong
wall receptacle is encountered, it is the personal
responsibility and obligation of the customer to have it
replaced with a properly grounded three-prong wall
receptacle. Do not under any circumstances, cut or
remove the third (ground) prong from the power cord.
Do not use an adapter plug.
Power supply cord with
three-prong grounding plug
CAUTION - Hazards or unsafe practices which COULD
result in minor personal injury or property damage.
Grounding type
wall receptacle
ImportnntSnfetyInstructions
To reduce risk of fire, electric shock, serious
injury or death when using your refrigerator,
follow these basic precautions, including the
following:
1. Read all instructions before using the refrigerator.
2. Observe all local codes and ordinances. 14.
3. Be sure to follow grounding instructions.
a. Check with a qualified electrician if you are not
sure this appliance is properly grounded.
5_ Do not ground to a gas line_ 15_
6. Do not ground to a cold-water pipe.
7. Refrigerator is designed to operate on a separate
115 volt, 15 amp., 60 cycle line.
8. Do not modify plug on power cord. If plug does 16.
not fit electrical outlet, have proper outlet installed
by a qualified electrician. 17.
9. Do not use a two-prong adapter, extension cord
or power strip.
10. Do not remove warning tag from power cord.
11. Do not tamper with refrigerator controls. 19.
12. Do not service or replace any part of refrigerator
unless specifically recommended in Use & Care 20.
Guide or published user-repair instructions. Do
13.
18.
not attempt service if instructions are not under-
stood or if they are beyond personal skill levek
Always disconnect refrigerator from electrical
supply before attempting any service. Disconnect
power cord by grasping the plug, not the cord.
Install refrigerator according to Installation
Instructions. All connections for water, electrical
power and grounding must comply with local
codes and be made by licensed personnel when
required.
Keep your refrigerator in good condition. Bumping
or dropping refrigerator can damage refrigerator
or cause refrigerator to malfunction or leak. If
damage occurs, have refrigerator checked by
qualified service technician.
Replace worn power cords and/or loose plugs.
Always read and follow manufacturer's storage
and ideal environment instructions for items being
stored in refrigerator.
Your refrigerator should not be operated in the
presence of explosive fumes.
Children should not climb, hang or stand on any
part of the refrigerator.
Clean up spills or water leakage associated with
water installation.
SAVE TH ESE INSTRUCTIONS
Harranty
Warranty
Full One Year Warranty on Refrigerator
For one year from the date of purchase, when this
refrigerator is operated and maintained according to
instructions attached to or furnished with it, Sears will
repair it, free of charge, if defective in material or
workmanship.
The ice and water filter cartridge is an extendable part,
which Sears will only replace free of charge for 30 days
from date of purchase, if defective in material or
workmanship.
Full Five Year Warranty on Sealed
Refrigeration System
For five years from the date of purchase, when this
refrigerator is operated and maintained according to
instructions attached to or furnished with it, Sears will
repair the sealed system (consisting of refrigerant,
connecting tubing and compressor moto0 free of
charge, if defective in material or workmanship.
The above warranty coverage applies only to
refrigerators which are used for storage of food for
private household purposes. It excludes original
Kenmore ice and water filter cartridges, which Sears
will replace, free of charge, for only 30 days from the
date of purchase, if defective in material or
workmanship.
Reverse Osmosis Water Systems
• Some Reverse Osmosis home water systems cause
low water pressure. Low water pressure can affect
the water and ice dispensing system by causing
small or hollow ice cubes and slow water flow
from the dispenser. Service problems related to the
home's Reverse Osmosis water system are not
covered by the warranty.
Product Record
In the space below record the model and serial
numbers and purchase date of your refrigerator. You
will find the model and serial number sticker inside the
refrigerator section on the left wall.
Model Number: 596.
Serial Number:
Purchase Date:
Keep this booklet and your Sears sales receipt in
a safe place for future reference.
Warranty service is available by contacting Sears at
1-800-4-MY-HOME "_0-800-469-4663).
This warranty applies only while this product is in use
in the United States.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from state to
state.
Sears, Roebuck and Co.
Dept. 817WA
Hoffman Estates, IL 60179
ProtectionAgreements
in the U.S.A°
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore _ product is designed and manufactured for
years of dependable operation. But like all products, it
may require preventive maintenance or repair from
time to time. That's when having a Master Protection
Agreement can save you money and aggravation.
Purchase a Master Protect.ion Agreement now and
protect yourseff from unexpected hassle and expense.
The Master Protection Agreement also helps extend
the life of your new producL Here's what's included in
the Agreement:
E_Expert service by our 12,000 professional repair
specialists
d Unlimited service and no charge for parts and
labor on all covered repairs
d "No-lemon" guarantee - replacement of your
covered product if four or more product failures
occur within twelve months
E_Product replacement if your covered product can't
be fixed
d Annual Preventive Maintenance Check at your
request - no extra charge
d Fast help by phone - phone support from a Sears
technician on products requiring in-home repair, plus
convenient repair scheduling
d Power surge protection against electrical damage
due to power fluctuations
E_Rental reimbursement if repair of your covered
product takes longer than promised
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service. You
can call anytime day or night, or schedule a service
appointment online.
Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. call 1-800-4-MY-HOME _
(1-800-/469-4663).
In Canada
Maintenance Agreements
Your purchase has added value because you can
depend on Sears HomeCentraP for service. With over
2,400 Service Technicians and more than a million
parts and accessories, we have the tools, parts,
knowledge and skills to back our pledge: We Service
What We Sell.
Your Kenmore _ product is designed, manufactured and
tested to provide years of dependable operation. But
like all products, it may require service from time to
time. The Sears Maintenance Agreement offers you an
outstanding service program, affordably priced.
Sears Maintenance Agreement
• Is your way to buy tomorrow's service at today's price
• Eliminates repair bills resulting from normal wear and
tear
• Provides phone support from a Sears technician on
products requiring in-home repair
• Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your product is in proper running
condition
Some limitations apply. For information about
Sears Canada Maintenance Agreements, call
1-800-361-6665
Sears has over 12,000 professional repair specialists,
who have access to over 4.5 million quality parts and
accessories. That's the kind of professionalism you
can count on to help prolong the life of your new
purchase for years to come. Purchase your Master
Protection Agreement today!
Some limitations and e×clusions apply, For prices
and additional information, call 1-800-827-8855o
Installation
Your refrigerator was packed carefully for shipment.
Remove and discard shelf packaging and tape. Do not
remove the serial plate.
Location
• Do not install refrigerator near oven, radiator or other
heat source. If not possible, shield refrigerator with
cabinet material.
• Do not install where temperature falls below 55° F
(13° C) or rises above 110° F (43° C). Malfunction may
occur at this temperature.
• Refrigerator is designed for indoor household
application only.
Measuring the Opening
When installing your refrigerator, measure carefully.
Allow Y2"space at top and '/2" space behind the machine
compartment cover (located in the rear) for proper air
circulation.
Subflooring or floor coverings (i.e. carpet, tile, wood
floors, rugs) may make your opening smaller than
anticipated.
Some clearance may be gained by using the leveling
procedure under Leveling.
Important: If refrigerator is to be installed into a recess
where the top of the refrigerator is completely covered,
use distance from floor to top of hinge cap to verify
proper clearance.
Leveling
To protect property and refrigerator from damage,
observe the following:
• Protect vinyl or other flooring with cardboard, rugs,
or other protective material.
• Do not use power tools when performing leveling
proced ure.
To enhance the appearance and maintain performance,
the refrigerator should be level.
Note
• Complete any required door reversal, panel
installation and/or a water supply connection,
before leveling.
Materials Needed
• 3/8"hex head driver
• Carpenter's level
1. Remove toe grille.
• Grasp firmly and pull outward
to unclip.
2. Remove bottom hinge cover(s).
• Place the eraser end of a pencil or similar blunt
tool in the cover notch.
Transporting Your Refrigerator
• NEVER transport refrigerator on its side. If an upright
position is not possible, lay refrigerator on its back.
Allow refrigerator to sit upright for approximately 30
minutes before plugging it in to assure oil returns to
the compressor. Plugging the refrigerator in
immediately may cause damage to internal parts.
• Use an appliance dolly when moving refrigerator.
ALWAYS truck refrigerator from its side or
back-NEVER from its front.
• Protect outside finish of refrigerator during transport
by wrapping cabinet in blankets or inserting padding
between the refrigerator and dolly.
• Secure refrigerator to dolly firmly with straps or
bungee cords. Thread straps through handles when
possible. Do not overtighten. Overtightening restraints
may dent or damage outside finish.
Notch
Location
• Use slight pressure to pry the
cover loose.
• Continue to maintain
downward pressure to the
notched side of the cover while
swingmg it off.
3. Using hex head driver, turn the front adjustment
screws (A) on each side to raise or lower the front
of the refrigerator.
C C
cont.
Installation
.
Using the hex head driver, turn each of these
adjustment screws (B) to raise or lower the rear of
the refrigerator.
.
Using the carpenter's level, make sure front of
refrigerator is '/4"(6 ram) or '/2bubble higher than
back of refrigerator and that the refrigerator is level
from side to side.
6. Turn stabilizing legs (C) clockwise until firmly
against floor.
7. Turn adjustment screws (A) counterclockwise to
allow the full weight of the refrigerator to rest on
the stabilizing legs.
8. Replace hinge cover(s).
• Position cover into the outer edge of the hinge.
• Swing the cover toward the cabinet and snap it
into place.
9. Replace the toe grille.
Note
• For proper reinstallation, ensure the "top" marking
on the interior of the toe grille is oriented correctly.
• Align the toe grille mounting clips with the lower
cabinet slots.
• Push the toe grille firmly until it snaps into place.
.
Unplug power cord from power source.
2.
Remove toe grille and bottom hinge
cover(s) (see page 7 and 8).
Remove top hinge cover from
refrigerator door by removing Phillips
screw and retain screw and cover for
later use.
Unscrew _,6" hex head screws from
top hinge to remove hinge and retain
all screws for later use.
Lift right side refrigerator door from " "
center hinge pin. Remove door
closure from center hinge pin on
the right side and retain for later
use.
Disconnect wire harness on top
of left side refrigerator door top
hinge.
Release two-pin connector by
pressing junction point with a
flat blade screwdriver or
fingernail.
Green ground wire remains
attached to the hinge.
Unscrew %6..hex head screws from
top hinge to remove hinge and retain
for later use.
right
stde
J door
closure
Door and Drawer Removal
Some installations require door/drawer removal to
transport the refrigerator to its final location.
To avoid electrical shock which can cause severe
personal injury or death, observe the following:
• Disconnect power to refrigerator before removing
doors or drawer. Connect power only after
replacing doors or drawer.
To avoid damage to walls and flooring, protect vinyl
or other flooring with cardboard, rugs or other
protective material.
Lift left side refrigerator door, along
with top hinge, from center hinge pin.
Remove center hinge pin with a _/,_..
hex head driver and retain hinge pin
for later use.
Remove Phillips screws to remove
right and left hinges and retain all
screws for later use.
Remove both stabilizing brackets
with %" hex head driver and retain
screws for later use.
Installation
Pullout Freezer Drawer
To prevent accidental child entrapment or
suffocation risk, do not remove the divider in the top
freezer basket.
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before removing doors. After replacing
doors, connect power.
To avoid possible injury, product, or property
damage, you will need two people to perform the
following instructions.
To Remove:
1. Pull upper basket out to full extension and lift out
to remove.
2. Pull drawer open to full extension.
To Install:
1. Pull both rails out to full
extension.
2. While supporting door front,
hook supports into tabs
located on inside of rail.
3. Lower door front into
final position.
4. Place the basket cradles back onto the side rails.
Align snaps with the slots on the side rails and
press each snap towards the rail until it clicks.
3. Lift lower basket straight up and out to remove.
/4. On each side raft is a
basket cradle with two
snap attachments. To
release each cradle,
unlatch the snaps by
pushing them inward, away
from the side raft system.
Lift the cradles off of the
rails.
5. Lift top of drawer front
to unhook supports
from rail system. Lift
door front out to
rem ove.
5. With rails pulled out to full extension, set the
basket straight down into the basket cradles.
Basket cradle
snap attachments
6. Slide upper basket into freezer. Make sure that rear
of basket hooks behind rail catch.
Installation
Door ReinstaHation
1. Install hinge assemblies:
Install top hinge loosely with _/,_"hex head
screws.
Install center hinge with Phillips
screws.
2_
Place hinge side of refrigerator door
on center hinge pin.
3_
While holding refrigerator door
upright, tighten down top hinge
with -_/,_"hex head driver.
4. Reconnect two-pin connector.
5. Replace top hinge covers.
Handles
If not installed, the handle is located in the interior of
the fresh food section or attached to the back of your
refrigerator.
4. Rotate the handle so that the
handle is flat against the door.
5. Push the handle down against the
upper door tab just enough to
allow it to hang unsupported.
Align bottom of handle with lower
door tab. Press upper handle end to
door surface and firmly grasp lower
end of handle. Gently slide handle
upward until bottom of handle
settles on door surface, then
reverse direction, sliding downward
to almost engaging tab with clip.
Remove and discard handle packaging and tape.
Handle design varies from refrigerator to refrigerator.
Please reference the appropriate instructions for your
model below.
Materials Needed
• Gloves to protect hands.
• Phillips screwdriver.
• Plastic door removal card ([or '/32"thick plastic card},
Retain the card.
To Install:
1. The handles are to be oriented
as shown.
.
Align front mount door handle
clip with the door tabs.
.
Ensure the handle clips are
positioned slightly above the
door tabs.
Grasp the handle firmly and slide
down until it clicks. The audible
click indicates fastening clips are
securely interlocked.
To Remove:
1. Flex the handle away from the door
panel. Simultaneously place door
handle removal card underneath
the base of the lower handle. Insert
the card to the line or until it stops.
2. Grasp the lower part of the handle
firmly and lift to remove.
10
Installation
Freezer Handle
Materials Needed
• Gloves to protect hands.
• Phillips screwdriver.
• Plastic handle removal card (or %" thick plastic
card). Retain the card.
Notes
• There is a slight curve to
the freezer handle.
• For proper installation, be
sure handle is oriented as .:,_:,:_,;;:_;_:;=_,,,_,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,.
shown.
To Install:
1. Align door handle clips slightly to the left of the
tabs attached to the freezer door.
2. Rotate the handle so the left base is flat against
the door.
i iii i I i_ i _i
ii ii i _iili
While firmly supporting the left handle base against
the door, align the right base of the handle with the
right tabs that are attached to the door.
Now, while firmly holding the handle at the left and
right bases, gently slide the handle towards the
right until the right base settles in. The handle
should now be flat against the face of the freezer
door at both the left and right bases.
With hands still firmly keeping the handle flat
against the freezer door, you may have to reverse
directions momentarily to assure clip/tab
engagement. Then firmly slide the handle to the
right until it clicks. The audible "click" indicates
that the fastening clips are securely interlocked.
To Remove:
At the right end, flex the handle base away from
the surface of the freezer drawer. Simultaneously
slide the door handle removal card that came with
your refrigerator under the right side base of the
handle. Slide the card to the line indication or until
it stops, which will be approximately 3/4".
Handle Door
3. Push the left handle
base against the left
door tab and slightly
to the right, just
enough to allow it to
hang unsupported.
With both hands, firmly grasp the handle towards
the right base.
Slide towards the left, lift and remove from the
surface.
11
Installation
Connecting the Water Supply
To reduce the risk of injury or death, follow
basic precautions, including the following:
• Read all instructions before installing ice maker.
• Do not attempt installation if instructions are not
understood or if they are beyond personal skill
level.
• Observe all local codes and ordinances.
Do not service ice maker unless specifically
recommended in Use & Care Guide or published
user-repair instructions.
Disconnect power to refrigerator before installing
ice maker.
• Water damage due to an improper water
connection may cause mold/mildew growth. Clean
up spills or leakage immediately!
Materials Needed
• Ya"outer diameter flexible copper tubing
• Shut-off valve (requires a X" hole to be drilled into
water supply line before valve attachment)
• Adjustable wrench
• '4" hex nut driver
Note
• You should only use copper tubing for installation.
Plastic is less durable and can cause damage.
• Add 8'
supply
2. Remove plastic cap from water valve inlet
to tubing length needed to reach water
for creation of service loop.
Create service loop with copper
tubing (minimum 2' diameter).
Avoid kinks in the copper tubing
when bending it into a service
loop.
port.
2' diameter
minimum
To avoid property damage or possible injury,
follow basic precautions, including the
following:
• Consult a plumber to connect Y#' O.D. copper
tubing to household plumbing to assure
compliance with local codes and ordinances.
• Confirm water pressure to water valve is between
35 and 100 pounds per square inch, 20 pounds
per square inch without filter.
• Do not use a self-piercing, or _,6"saddle valve.
Both reduce water flow and can become clogged
over time, and may cause leaks if repair is
attempted.
• Tighten nuts by hand to prevent cross threading.
Finish tightening nuts with pliers and wrenches.
Do not overtighten.
• Wait two to three hours before placing refrigerator
into final position to check and correct any water
leaks. Recheck for leaks after 2/4 hours.
• Verify the copper tubing under the sleeve is
smooth and free from defects. Do not reuse an old
sleeve.
Place brass nut (A) and sleeve (B)
on copper tube end as illustrated.
Reminder: Do not use an old
sleeve.
Place end of copper tubing into water
valve inlet port. Shape tubing slightly. Do
not kink - so that tubing feeds straight
into inlet port.
5. Slide brass nut over sleeve and screw nut
into inbt port. Tighten nut with wrench.
UMPORTANT: Do not overdghten. Cross
threading may occur.
Pull on tubing to confirm connection is
secure. Connect tubing to frame with
water tubing clamp (C) and turn on
water supply. Check for leaks and
correct if necessary. Continue to
observe the water supply connection
for two to three hours prior to moving
the refrigerator to its permanent
location.
7. Monitor water connection for 2/4 hours. Correct
leaks, if necessary.
12
Installation
Opening and Closing Your
Fresh Food Doors
Your new refrigerator is uniquely designed with two
fresh food doors. Either door can be opened or closed
independently of one another.
There is a vertically-hinged section on the left fresh
food door called the SmartSeal. When the left door is
closed, the hinged section automatically forms a seal
between the two doors when both doors are closed.
When the left door is opened, the SmartSeal
automatically folds inward so that it is out of the way.
To avoid electrical shock which can cause severe
personal injury or death, DO NOT attempt to
remove the SmartSeal from the fresh food section.
To avoid possible product damage, ALWAYS verify
that the SmartSeal is folded against the edge of
the door prior to closing.
13
TemperatureControls
Touch Temperature Controls
The controls are located at the top front of the
refrigerator compartment.
Note
• The freezer control turns the cooling system on.
Neither section will cool if freezer is set to OFE
Control
Freezer Refr_gerato_
Initial Control Settings
After plugging the refrigerator in, set the controls.
• Pressing the @ or@ pads adjusts the controls to
the desired setting.
• The temperature control range for both
compartments is 1 through 7 (coldest).
• Initially set the refrigerator control on 4.
• Initially set the freezer control on 4.
• Let the refrigerator run at least 8 to 12 hours before
adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.
Adjusting the Controls
24 hours after adding food, you may decide that one
or both compartments should be colder or warmer. If
so, adjust the control(s) as indicated in the
Temperature Control Guide table below. See page 21
for instructions on checking compartment
temperature.
• Except when starting the refrigerator, do not change
either control more than one number at a time.
• Allow 24 hours for temperatures to stabilize.
• Changing either control will have some effect on the
temperature of the other compartment.
Temperature Control Guide
Refrigerator too warm
Refrigerator too cold
Freezer too warm
Freezer too cold
Turn refrigerator OFF
Set the refrigerator control
to next higher number by
pressing the @ pad.
Set the refrigerator control
to next lower number by
pressing the @ pad.
Set the freezer control to
next higher number by
pressing the pad.
Set the freezer control to
next lower number by
pressing the pad.
Press the refrigerator or
freezer pad until a dash
(-) appears in the display.
Moisture Control Switch (select models)
Off - The refrigerator uses more energy when this
switch is off, because a heater located in the hinged
seal section of the door is running. This heater helps
prevent condensation formation on the exterior of the
hinged seal. Turn the switch OFF when the
environment is warm and more humid or if moisture
is noticed on the door exterior.
14
• On - This setting saves energy by not using the
heater. Turn the switch ON when the environment is
less humid.
FreshFoodFemures
Shelves
To avoid personal injury or property damage,
observe the following:
• Never attempt to adjust a shelf that is loaded with
food.
• Confirm shelf is secure before placing items on
shelf.
• Handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Your refrigerator has Spillproof Glass Shelves. The
Spillproof shelves have a spill retainer edge which
allows for easier clean up and are equipped with a
slide out feature. To slide out, grasp the front of the
shelf and pull forward. Push in the shelf to return to
the original position.
To Remove a Shelf:
• Slightly tilt up the front and lift up
the rear of the shelf, then pull the
shelf straight out.
Door Storage
Dairy Center
The Dairy Center provides
convenient door storage for
spreadable items such as butter
and margarine. This compartment can be moved to
different locations to accommodate storage needs. To
use the dairy center, raise the cover.
To Remove:
• Raise the cover, pull upward and tilt out.
1"oInstall:
• Slide the Dairy Center in and down until
firmly seated in the door liner.
Door Buckets
Door Buckets can be moved to
meet storage needs.
To Remove:
• Slide bucket up and pull straight out.
To Install:
To Lock the Shelf into Another
Position:
• Tilt up the front edge of the shelf.
• Insert the hook into the desired frame openings and
let the shelf settle into place.
• Be sure the shelf is securely locked at the rear.
The Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
• Place hand under the frame to push up the glass. Lift
glass out.
• Lift frame from refrigerator liner rails.
To Install:
• Replace frame in refrigerator liner rails.
• Carefully replace glass into frame.
• Slide bucket in and down until firmly seated in the
door liner.
Adjustable Deep Tilt-Out Door Buckets
The Adjustable Deep Tilt-Out Door Bucket provides
easy access to food items stored in the door.
To Remove Bucket:
• Tilt bucket out.
• Pull straight out of the bracket.
To Install Bucket:
• Tilt the front of the bucket down slightly.
• Slide into bracket and tip upright.
To Move Bucket Frame to Another Location:
• Remove bucket.
• Lift bracket up and pull straight
out.
Place the bracket in a new
location.
15
FreshFoodFemures
Crisper Drawers
The Crisper Drawers provide a higher humidity
environment for fresh fruit and vegetable storage.
Controls
The Crisper Controls regulate the amount of humidity
in the crisper drawee Slide the control toward the LOW
setting for produce with outer skins. Slide the control
toward the HIGH setting for leafy produce.
Humidity
HIGH ® • ® o • • o LOW
To Remove:
• Pull drawer out to full extension. Tilt up front of
drawer and pull straight out.
To install:
• Insert drawer into frame rails and push back into
place.
Note
• For best results, keep the crisper drawers tightly
closed.
To Remove Drawer:
• Lift lid. Pull drawer out to full extension. Tilt up front
of pantry and pull straight out.
To Install Drawer:
• Push metal glide rails to the back of the refrigerator.
Place drawer onto rails and slide drawer back until it
falls into place.
To Remove Divider:
• Pull drawer completely out and raise the front of the
divider to unhook it from the rear wall of the pantry
and lift it out.
To Install Divider:
• Hook back of divider over rear wall of pantry and
lower into place
FreezerFeatures
Temperature-Controlled Drawer
The Gourmet Pantry drawer is a full-width drawer
with adjustable temperature control. This drawer can
be used for large party trays, dell items, beverages or
miscellaneous items and features a divider to organize
the Gourmet Pantry into sections if desired.
There is a temperature control which adjusts the
amount of cold air allowed into the Gourmet Pantry.
The control is located on the right side of the drawer.
Depending on your model, it is either on the front of
the drawer or under the lid.
Set the control to cold or _ to provide a normal
refrigerator temperature. Set the drawer on the
coldest or _ setting when a temperature colder than
the main refrigerator compartment is desired. Use the
coldest setting when storing meats.
Notes
• Cold air directed to the Gourmet Pantry can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.
To prevent accidental child entrapment or
suffocation risk, do not remove the divider in the top
freezer basket
Upper Wire Basket
To Remove:
• Pull upper basket out to full extension and lift out to
remove.
To Install:
• Slide upper basket
into freezer. Make
sure that rear of
basket hooks behind
rail catch.
Note
• See page 9 for lower basket and complete pullout
drawer instructions.
• Do not place leafy vegetables in the Gourmet
Pantry drawer. Colder temperatures could damage
leafy produce.
16
I©eundWuter
Automatic Ice Maker
Connect the ice maker to the water supply as
instructed on page 12. Proper water flow and a level
refrigerator are essential for optimal ice maker
performance.
Operating Instructions
• Confirm ice bin is in place and ice maker arm is
down.
• After freezer section reaches between 0° to 2° F (-18 °
to -17 ° C), ice maker fills with water and begins
operating. You will have a complete
harvest of ice approximately every
three hours.
• Allow approximately 24 hours after
installation to receive first harvest of
ice.
• Discard ice created within first 12 hours of operation
to assure system is flushed of impurities.
• Turn off (arm up) the ice maker when the water
supply is to be shut off for several hours.
To Remove the Ice Bin:
• Pull it forward, away from the ice maker. To avoid the
ice maker dumping ice while the bin is removed, turn
the ice maker off by raising the sensor arm.
To Install the Ice Bin:
• Reverse the above procedure. Turn the ice maker on
by lowering the sensor arm.
To avoid personal injury or property damage,
observe the following:
• Do not place fingers or hands on the automatic ice
making mechanism while the refrigerator is
plugged in. This will help protect you from possible
injury. It will also prevent interference with moving
parts of the ejector mechanism and the heating
element that releases the cubes.
• Stop ice production by raising ice maker arm until
click is heard.
• Ice maker will remain in the off position until arm is
pushed down.
• The first one or two batches will probably contain
undersized and irregular cubes because of air in the
supply line.
• When the ice cubes are ejected it is normal for
several cubes to be joined together at the ends. They
can easily be broken apart. The ice maker will
continue to make ice until the supply of ice cubes
raises the sensor arm, shutting the ice maker off.
• Certain sounds may accompany the various cycles of
the ice maker. The motor may have a slight hum, the
cubes will rattle as they fall into an empty storage
pan and the water valve may click or "buzz"
occasionally.
• If the ice is not used frequently, the ice cubes will
become cloudy, shrink, stick together and taste stale.
Empty the ice storage bin periodically and wash it in
lukewarm water. Be sure to dry the bin thoroughly
before replacing it.
• Under certain rare circumstances, ice cubes may
be discolored, usually appearing with a green-
bluish hue. The cause of this unusual discoloration
can be a combination of factors such as certain
characteristics of local waters, household
plumbing and the accumulation of copper salts in
an inactive water supply line which feeds the ice
maker. Continued consumption of such discolored
ice cubes may be injurious to health. If such
discoloration is observed, discard the ice cubes
and contact your dealer to purchase and install a
water line filter.
• Water damage due to improper water connection
may cause mold/mildew growth.
• Clean up water and ice spills to avoid personal
injury and to prevent mold/mildew growth.
Water Dispenser
The Water Dispenser is located on
the left side waft of the fresh food
section. This design is for cold water
dispensing only.
• Beverages and foods should not be placed in the ice
storage bin for quick chilling. These items can block
the sensor arm, causing the ice maker to
malfunction.
To Dispense Water:
• Hold container under spout and
press dispenser pad.
17
WaterFilter
Removal and Installation
To avoid serious illness or death, do not use
refrigerator where water is unsafe or of unknown
quality without adequate disinfection before or after
use of filter.
After installing a new water filter, always dispense
water for two minutes before removing the filter for
any reason. Air trapped in system may cause water
and cartridge to eject. Use caution when removing.
• The bypass cap does not filter water. Be sure to
have replacement cartridge available when filter
change is required.
• If water filtration system has been allowed to
freeze, replace filter cartridge.
If system has not been used for several months, or
water has an unpleasant taste or odor, flush
system by dispensing water for two to three
minutes. If unpleasant taste or odor persists,
change filter cartridge.
Initial Installation
The water filter is located in the
upper right-hand corner of the fresh
food compartment.
1. Remove blue bypass cap and
retain for later use.
4. Reduce water spurts by flushing air from system.
Run water continuously for two minutes through
dispenser until water runs steady. During initial
use, allow about a one- to two-minute delay in
water dispersal to allow internal water tank to fill.
• Additional flushing may be required in some
households where water is of poor quality.
Replacing Water Filter
Important: Air trapped in system may cause
water and cartridge to eject. Use caution when
removing.
1. Turn filter counterclockwise until it releases from
filter head.
2. Drain water from filter into sink, and dispose of
filter in normal household trash.
3. Wipe up excess water in filter cover and continue
with hTitial Installation, steps 2 and 4.
The filter should be changed at least every 12 months.
Important: Condition of water and amount used
determines life span of water filter cartridge. If water
use is high, or if water is of poor quality, replacement
may need to take place more often.
To purchase a replacement water filter cartridge,
call 1-800-4-MY-HOMP _(1-800-469-4663).
The dispenser feature may be used without a water
filter cartridge. If you choose this option, replace filter
with blue bypass cap.
2. Remove sealing label from end of
filter and insert into filter head.
3. Rotate gently clockwise until
filter stops. Snap filter cover
closed.
18
WaterFilter
System Specification and Performance Data Sheet
Refrigerator Water Filter Cartridge Model 469006-750
Specifications
Service Flow Rate (Maximun]) .............................................0.78 GPM (2.9 L/min)
Rated Service Life 469006-750 (Maximum) ...................750 gallons/2838 liters
Maximum Operating Temperature .....................................100° F/38 ° C
Minimum Pressure Requirement ........................................35 psi/241 kPA
Minimum Operating Temperature ......................................33° F/1 ° C
Maximum Operating Pressure .............................................120 psi/827 kPA
1000 Apollo Road
Eagan, Minnesota 55121-2240
651.450.4913
EPA EST #35917-MN-1
Performance Data
Standard No. 42: Aesthetic Effects
Parameter
Chlorine
T&O
Particulate _*
Parameter
Turbidity
Cysts
Asbestos
Lead at pH 6.5
Lead at pH 8.5
Mercury at pH 6.5
Mercury at pH 8.5
Atrazine
Benzene
Carbofuran
)-Dichlolobenzene
Lindane
Toxaphene
Tested using a flow rate of 0.78 gpm; pressure of 60 psig; pH of Z5 + 0.5; temp. of
68 ° + 5° F (20 ° + 3 ° C)
** Measurement in Particles/mL Particles used were 0.5 - 1 microns
*** NTU - Nephelometric Turbidity Units
USEPA
MCL
USEPA
MCL
1 NTU_*
99.5% Reduction
99% Reduction
0.015 mg/L
0.015 mg/L
0.002 mg/L
0.002 mg/L
0.003 nff_/L
0.005 m_)/L
0.04 m_)/L
0.075 mg/L
0.0002 m_)/L
0.003 mg/L
Standard No. 53: Health Effects
107108fibers/L; fibers >10 nlicrometers in length
Influent
Challenge Concentration
2.0 mg/L ± 10%
at least 10,000 particles/ml 85%
Influent
Challenge Concentration
11 ± 1 NTU***
Minimum 5&OOO/L
0.15 mg/L + 10%
0.15 mg/L + 10%
.006 mg/L ± 10%
.006 mg/L ± 10%
0.009 mq/L + 10%
0.015 m_)/L ± 10%
0.08 m_)/L ± 10%
.225 mg/L ± 10%
0.002 m_iL + 10%
0.015 ± 10O/o
Influent
Average
1.88 mg/L
5.700.000 #/ml
Influent
Average
10.7 NTU
166,500 #/L
155 MF/L
0.153 mg/L
0.150 mg/L
0.006 mg/L
0.006 mg/L
0.009 nff_/L
0.014 nl_)/L
0.081 m_)/L
0.208 m_)/L
0.002 m_iL
0.015 mg/L
100834/B
Effluent
Average Maximum
(0.05136364 mg/[ 0.06 mg/L
30.583 #/ml 69.000 #/ml
Effluent
Average Maximum
0.31 NTU .049 NTU
<1 #/L <1 #/L
<1 MF/L <1 MF/L
<.001 mg/L <.001 mg/L
<.001 mg/L <.001 mg/L
0.0003 mg/L 0.0005 mg/L
0.0008 mg/L 0.0015 mg/L
<0.002 mq/L 0.002 mg/L
0.0006 m_)/L 0.0011 m_)/L
<0.001 mg/L <0.001 m_)/L
<0.0005 mg/L <0.0005 m_)/L
0.0O0 m_iL <0.0001 m_)/L
<0.001 mg/L <0.001 mg/L
Tested and certified by NSF International against ANSI/NSF Standards 42 & 53
in models 469006-750 for the reduction of:
Standard No. 42: Aesthetic Effects Standard No. 53: Health Effects
Taste and Odo_ Reduction Cbenlical Reduction Unit
Chlorine Taste & Odor Lead, Atrazine, Lindane, Benzene,
Mechanical Filtration Unit Caibofuian, p-Dichlorobenzene, Mercury
Particulate Reduction Class 1 & Toxaphene Reduction
% Reduction
Average Minimum
>9726% 96.84%
99.52% 98.94%
% Reduction
Average Minimum
9709% 95.20%
>99.99% >99.99%
>99.99% >99.99%
>99.35% >9929%
>99.33% >9929%
95.70% 90.91o/o
86.22% 75,93%
76,99% 75.31%
95.71% 92.14%
98.74% 98.46%
99.76% 99.74%
98.72% 96.50%
92.97O/o 91.67%
Mechanical Filtration Unit
Cyst, Turbidity and Asbestos Reduction
Min. Required
Reduction
Min. Required
Reduction
>99.95%
0.10 mg/L
0.10 mg/L
0.002 mg/L
0.002 mg/L
0.003 mg/L
0.005 mg/L
0.04 m_)/L
0.075 mg/L
0.0002 m_iL
0.003 mg/L
50%
0.5 NTU
99%
General Use Conditions
Read this Performance Data Sheet and compare the
capabilities of this unit with your actual water
treatment needs.
DO NOT use this product where water is microbic-
logically unsafe or of unknown quality without
adequate disinfection before or after the system.
System certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
USE ONLY WITH COLD WATER SUPPLY. CHECK
FOR COMPLIANCE WITH THE STATE AND LOCAL
LAWS AND REGULATIONS.
The retractable water filtration system uses a/469006-
750 replacement cartridge. Timely replacement of filter
cartridge is essential for performance satisfaction from
this filtration system. Please refer to the applicable
section of your Use & Care Guide for general
operation, maintenance requirements and
troubleshooting. Suggested retail price of replacement
water filter is $39.99.
This system has been tested according to ANSI/NSF/42
and 53 for reduction of the substance listed above. The
concentration of the indicated substances in water
entering the system was reduced to a concentration less
than or equal to the permissible limit for water leaving
the system, as specified in ANSI/NSF/42 and 53.
19
WaterFilter
Water Treatment Device
State of California
Department of Health Services
Certificate Number
03- 1583
Date Issued: September 16, 2003
Date Revised: April 22. 2004
Trademark/Model Designation
UKFS001AXX750
469006-750
67003523-750
Manufacturer: PentaPure Inc.
Cysts
Turbidity
Organic Contaminants
Atrazine
Lmdmle
Benzene
CarboIhran
p-dichtorobenzene
loxaphene
Replacement Elements
of the
2O
Rated Service Capacity: 750 gal. Rated Service Flow: 0.78 gpm
Conditions of Certification:
Do not use where water is lnicrobiotogically unsafe or with water of unkno_x_ quality, except that systems certified t\_r cyst
reduction may be used on disinfected waters that may contain filterable cysts.
Loading...