Kenmore Elite 58077107710, 58077127710 Owner’s Manual

Use & Care Guide Manual de Uso y Cuidado

Kenmore Elite®

Smart Room Air Conditioner

SMART

CONTROL

Aire Acondicionado Inteligente Para Habitación

Models/Modelos: 580.77107710 (10000 BTU)

580.77127710 (12000 BTU)

MFL66921602

Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A.

www.kenmore.com

TABLE OF CONTENTS PRODUCT RECORD

IMPORTANT SAFETY INSTRUCTIONS ............................. 3-5

GROUNDING REQUIREMENTS ............................................5

FEATURES AND BENEFITS

Key Parts and Components .....................................................6

Electrical Data ..........................................................................6

INSTALLATION REQUIREMENTS

Key Dimensions and Specifications .......................................7

Items Included ...........................................................................7

Tools Required ...........................................................................7

INSTALLATION INSTRUCTIONS

Window Requirements .............................................................8

Preparation of Cabinet ............................................................8

Cabinet Installation.............................................................. 9-11

HOW TO USE

Control Panel and Remote Control ....................................... 12

Inserting the Remote Control Battery ................................... 13

Ventilation ................................................................................ 13

Air Direction ............................................................................. 13

Additional Features ................................................................ 14

Smart Features ........................................................................ 14

FCC Notice .............................................................................. 15

Wireless LAN Module Specifications .................................. 15

Open Source Software Notice .............................................. 15

In the space below, record the date of purchase, model, and serial number of your product. You will find the model and serial number printed on an identification plate located on the outside of the cabinet, or behind the filter at the bottom of the unit. Use a flashlight to help read the numbers, or remove the cabinet front as instructed in the Care and Cleaning section. Have these items of information available whenever you contact Sears concerning your product.

Model No. Date of Purchase Serial No.

Save these instructions and your sales receipt for future reference.

CARE AND CLEANING

Air Filter .................................................................................... 16

Cleaning the Air Conditioner ................................................ 16

TROUBLESHOOTING GUIDE

Normal Sounds You May Hear .............................................17

Before Calling for Service ................................................ 18-19

WARRANTY ...................................................................... 20

SERVICE ..........................................................BACK COVER

SAFETY MESSAGES

There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and the word WARNING or CAUTION as shown below.

WARNING

CAUTION

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

All safety messages are intended to make you aware of potential hazards and how to reduce the chances of any injury. The safety message may also point out the negative consequences in case instructions are not properly followed.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this air conditioner.

WARNING

Risk of Fire or Explosion

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.

WARNING

Avoid fire hazard or electric shock.

Do not use an extension cord or an adapter plug. Do not remove any prong from the power cord.

3-prong grounding type wall receptacle

NOTE:

contains a current detection device designed to reduce the risk of fire. Refer to the Electrical Data section for operation of the current device.

In the event that the power supply cord is damaged, it cannot be repaired, and it must be replaced with a cord from the product manufacturer.

The power supply cord with this air conditioner

WARNING

Electrical Requirements

The complete electrical rating of your new room air conditioner is stated on the product label. Refer to the rating when checking the electrical requirements.

xBe sure the air conditioner is properly grounded. To

minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a threeprong grounding plug for protection against shock hazards.

Do not,

3-prong grounding plug and current detection device

xThe air conditioner must be connected to a properly

grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.

xDo not run air conditioner without cabinet in place.

This could result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

under any circumstances, cut, remove, or bypass the grounding prong.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

Basic Safety Precautions

xBe sure the electrical supply is adequate for the model

you have chosen. This information can be found on the product label, which is located on the side of the cabinet.

xIf the air conditioner is to be installed in a window,

you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, remove the screen completely before installation.

xDuring installation, make sure that the unit is secured

firmly in the window and installed as detailed in the installation instructions in this Use & Care Guide. Save this manual and the installation instructions for possible future use in removing or reinstalling this unit.

xWhen handling the air conditioner, be careful to avoid

cuts from sharp metal fins on front and rear coils.

xUse an assistant to help lift and place the air

conditioner in the window.

Installation

xDo not use a damaged power cord or plug, or connect

to a socket which is loose or damaged. xDo not modify or extend the power cord. xDo not disassemble or modify the product. xDo not place heavy objects on the power cord, and

keep the cord out of traffic areas where it presents a

trip hazard. xPlug the product into a dedicated outlet. Do not use an

adapter to plug multiple appliances into one outlet. xDo not place power cord near a heater.

Operation and Maintenance

xIn the event of a gas leak, do not operate this or any

other appliance. Open doors or windows to ventilate the room.

xDo not stop or start the product by inserting or pulling

out the power plug.

xIf the power cord needs to be replaced, the work must

be performed by authorized personnel only, using genuine replacement parts.

xUnplug the product by pulling the plug head, not the

power supply cord.

xDo not operate with wet hands or in a damp

environment.

xDo not open the suction inlet grille of the product

during operation.

xUnplug the product if strange sounds, odors, or smoke

come from it. xTurn off and unplug the unit before cleaning. xNever touch the metal parts of the product while

removing the filter. xDo not allow water to run into electric parts of the

product. xUse a soft cloth to clean. Do not use wax, thinners, or

strong detergents. xUnplug the air conditioner when not in use for long

periods. xFor repair and maintenance, contact an Authorized

Service Center. See the warranty page for details or

call 1-844-553-6667.

CAUTION

Installation

xFollow installation instructions exactly to avoid

vibration or water leakage.

Operation and Maintenance

xThis product is intended for indoor residential use only,

not for industrial or other commercial applications. The warranty is void if this product is ever used for other than private household purposes.

xDo not block the air circulation/ventilation openings.

xDo not step on the unit or place objects on top of it. xClean the filter every two weeks. Insert the filter

properly before operating. xDo not drink water drained from the air conditioner. xDo not insert hands or objects into the air intake or

outlet during operation. xIf batteries leak onto skin or clothing, rinse affected

areas well with clean water. Do not use the remote if

the battery has leaked. xIf battery fluid is ingested, rinse well with water and

consult a physician immediately.

IMPORTANT SAFETY INSTRUCTIONS

GROUNDING REQUIREMENTS

IMPORTANT: Please read carefully.

To Connect Electricity

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

Grounding Instructions

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DO NOT CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER PLUG.

Risk of Fire or Explosion

xDo not use any means to accelerate the defrosting

process or to clean the product, other than those recommended by the manufacturer.

xStore the appliance in a room without continuously

operating ignition sources such as open flames, an operating gas appliance or an operating electric heater.

xDo not pierce or burn the appliance. Be aware that

refrigerants may not contain an odor.

WARNING

xBeing exposed to direct airflow for an extended period

could be hazardous to your health.

xRunning the fan will not prevent oxygen depletion.

Make sure to open doors or windows occasionally to ventilate the room.

WARNING:

the State of California to cause cancer and birth defects or other reproductive harm.

This product contains chemicals known to

Wash hands after handling.

CAUTIONWARNING

Risk of Fire or Explosion

This unit contains R32, a flammable refrigerant, and has special safety precautions not normally associated with older units. Please follow all precautions and advisories.

xUse caution while handling and prevent damage to

the unit. Do not put any holes into the product for any

reason, as this can cause damage to the product and

prevent it from cooling. xMaintenance and cleaning of the product should be

performed by trained personnel. Failure to properly

clean the product can result in damage to the

refrigeration system and or the electrical system. xKeep the air circulation/ventilation openings free from

obstruction. xService should only be performed by technicians

properly trained and certified in the use of flammable

refrigerants. Any service performed by unauthorized

servicers/individuals will void all warranties. xWhen storing the appliance, do not put in a room with

any open flame appliances, such as gas water heaters

or furnaces. Also keep away from electric heaters.

Damaged units should be repaired before storage.

FEATURES AND BENEFITS

Key Parts and Components

WARNING

Install this appliance in accordance with National Electric Code guidelines.

Vertical Air Deflector (Horizontal Louver)

QR code emblem (For establishing smart app connection)

Brace

Upper Guide

Cabinet

Front Grille

Air Filter

Air Discharge

Remote Control

Horizontal Air Deflector (Vertical Louver)

Air Intake (Inlet Grille)

Electrical Data

120 V

RESET

TEST

Power cord may include a current interrupter device. Test and reset buttons are provided on the plug case. Periodically test the device by first pressing TEST and then RESET. If the TEST button does not trip or if the RESET button will not stay engaged, stop using the air conditioner and contact a qualified service technician.

CAUTION

The conductors inside this cord are surrounded by shields, which monitor leakage current. These shields are not grounded. Periodically examine the cord for any damage. Do not use this product in the event the shields become exposed. Avoid shock hazard. This unit cannot be user-serviced. Do NOT open the tamperresistant sealed portion. All warranties and performance will be voided.

Evaporator

BTU & Wall Receptacle Power Supply

10000 BTU and 12000 BTU

Use 15 A, time-delay fuse

or 15 A circuit breaker. Standard 120 V, 3-wire grounding receptacle rated 15 A/120 VAC/60 Hz

WARNING

DO NOT USE EXTENSION CORDS RISK OF FIRE, SERIOUS INJURY OR DEATH.

xDo not use an extension cord with this

product.

xDo not use surge protectors or multi-outlet

adapters with this product.

WARNING

Never push the test button during operation. Doing so can damage the plug.

xDo not remove, modify, or immerse this

plug. If this device trips, the cause should be corrected before further use.

Compressor Condenser

Base Pan

Power Cord

INSTALLATION REQUIREMENTS

.H\'LPHQVLRQVDQG6SHFLoFDWLRQV

Description Window Air Conditioner Electrical Requirements See electrical rating plate on unit Dimensions

(without curtain panels) Net Weight 10000 BTU: 74 lb. (33.6 kg) / 12000 BTU: 81 lb. (36.7 kg)

Items Included

Foam-PE (2)

(adhesive-backed)

Foam strip

(non-adhesive)

23.6 in. (W) X 22.2 in. (D) X 15 in. (H) 60 cm (W) X 56.4 cm (D) X 38.1 cm (H)

Heatproof foam (2) (adhesive-backed)

Right curtain panel

Drain joint pipe

Left curtain panel

Sill bracket (2)

Frame guide (2)

Window locking bracket

Type A (14) Type B (3) Type C (5) Carriage Bolt (2) Lock Nut (4)

Tools Required

Phillips-head screwdriver Flat-blade screwdriver Adjustable wrench

Level Measuring tape Knife

Scissors Pencil

INSTALLATION INSTRUCTIONS

Window Requirements

Size

NOTE:

masonry, or metal.

Clearance

Proper clearance enhances the cooling efficiency of the product.

Secure all supporting parts to firm wood,

xThis room air conditioner is designed for installation in

standard double-hung windows with actual opening widths from 27” to 39”.

xThe upper and lower window sash must open

sufficiently to allow a clear vertical opening of 16” from the bottom of the upper sash to the inside sill.

xThe height offset between the inside sill and outside sill

must be less than 1 ¼".

27" to 39"

16" min

Preparation of Cabinet

Remove the 4 screws which fasten the cabinet at

both sides and at the back. (2 of the screws will be used later to refasten the sides of the cabinet to the unit.)

Shipping Screws

Slide the unit from the cabinet by gripping the base

pan handle and pulling forward while bracing the cabinet.

If a storm window presents interference, fasten a 2”

wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference by the storm window frame.

(See drawing.) The top of the wood strip on the

inside sill should be approximately ¾” higher than the storm window frame or wood strip on the outside sill to help condensation to drain properly to the outside.

If necessary, install a second wood strip (same

thickness as first strip) across the full width of the outer sill, flush against the back of the inner sill.

Wood Strip Mounted on Top of Inner Sill

Inner Sill

Wood Strip

¾"

Clearance

Storm Window Frame

Outer Sill

CAUTION

The unit is heavy. To prevent injury, use proper lifting techniques when pulling unit forward from cabinet. Obtain assistance from another person if possible.

Cut the window sash seals (Foam-PE) to the

proper length. Peel off the backing and attach the adhesive-backed foam to the underside of the window sash and the bottom of the window frame.

Foam-PE (Adhesive backed)

Insert the lower curtain panel guides into the bottom

of the cabinet. Insert the guides so that the flange faces to the rear of the cabinet.

Indoors

Outdoors

Insert the top and bottom rails of the curtain panels

into the upper and lower panel guides.

Upper Guide

Left Curtain Panel

Right Curtain Panel

Lower Guide

CAUTION

The lower panel guides are easily broken. Be careful with them when installing the cabinet.

Fasten the curtain panels to the unit with 8 type A

screws.

INSTALLATION INSTRUCTIONS

Cabinet Installation

Inside Sill

Center Line

1 ¼" max.

Outside Sill

Open the window. Mark a line on the center of the

inside sill. Carefully place the cabinet in the window and align

the center hole on the cabinet bottom front with the center line marked on the window sills.

Screws (Type A)

Inside Sill

Center Hole

Pull the bottom window sash down behind the upper

guide until they meet.

Window Sash

Upper Guide

NOTE:

Do not pull the window sash down so tightly

that the movement of the curtain panels is restricted. Loosely assemble each sill support.

Sill Support

Nut

Bolt

NOTE:

If the distance to the outer window sill is not

that deep, you may not need the bolt and nut.

INSTALLATION INSTRUCTIONS

Use 2 type A screws to attach a sill support to the

cabinet track holes on one side. Use the cabinet track holes that will place the sill support nearest to the outer edge of the sill. Repeat with the second sill support on the opposite side of the cabinet.

Screws (Type A)

Outdoor

Indoor

Install the cabinet with a slight tilt (about ½”)

downward on the outside. Use the bolt and nut to adjust the tilt of the cabinet.

about

½”

Cabinet

CAUTION

Do not drill a hole in the bottom pan. The product is designed to operate with approximately ½” of water in the bottom pan. There is no need to add water if the pan is dry.

Pull each curtain panel out to the side until it meets

the window sash track. Pull the bottom window sash down behind the upper guide until it meets the top of the cabinet.

Upper Guide

Sash Track

Inside Window Sill

Front Angle

NOTE:

that the movement of the curtain panels is restricted. Use a screwdriver or power drill to attach the

curtain panels to the window sashes by driving type C screws into the sashes through the cabinet holes shown in the figure below.

Do not pull the window sash down so tightly

Screws (Type C)

Attach the cabinet to the inside sill by driving 3 type

B screws through the cabinet front angle and into the sill.

Sash Track

Front Angle

Screws (Type B)

NOTE:

cabinet and the inside sill is too great, install a wood strip to make up the difference. See the Clearance instructions for details.

If the gap between the bottom of the

With the aid of an assistant, slide the unit into the

cabinet. Reinstall the screws removed from the cabinet sides in step 1.

CAUTION

xThe unit is heavy. Use an assistant to help lift the

unit and set it in place. Lifting and maneuvering the unit by yourself could result in injury.

xHold the unit firmly in place until the window

frame is lowered to meet the top surface of the unit directly behind the upper guide. If the unit falls from the window, it could cause personal injury or property damage.

INSTALLATION INSTRUCTIONS

Cut the non-adhesive foam strip to the proper length

and insert it between the upper window sash and the lower window sash.

Foam Strip (Not adhesive backed)

Attach the window locking bracket with a type C

screw.

Window Locking Bracket

Connect the wire harness from the front grille

assembly to the air conditioner.

Attach the front grille assembly to the cabinet by

inserting the grille tabs into the slots on the front of the cabinet. Push the grille in until it snaps into place.

Before installing the front grille, fold out the vent

control lever located to the left of the control panel as shown.

Cut the adhesive-backed heatproof foam to match

the size of the curtain panels. Remove the backing from the heatproof foam and attach it to the curtain panels.

Heatproof foam

NOTE:

capability of the air conditioner.

The heatproof foam improves the cooling

NOTE:

the grille as you push the grille in. Open the air inlet grille and secure the front grille

assembly with 1 type A screw through the bottom of the front grille. (There are 2 type A screws packed in a small bag. Use one and store one as a spare.)

The window installation of the room air conditioner is now complete. See the Electrical Data section for information on attaching the power cord to an electrical outlet.

Carefully guide the vent control lever through

HOW TO USE

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Use & Care Guide, including the Important Safety Instructions, before operating this air conditioner.

Control Panel and Remote Control

Remote Control

POWER

Press to turn the air conditioner ON or OFF.

FAN SPEED BUTTON

Press to set the fan speed to Low, Medium, or High. The display will show one, two or three bars.

DELAY ON/OFF TIMER

Delay ON

automatically turn on from 1 to 24 hours later, at its previous mode and fan settings.

Delay OFF

automatically turn off from 1 to 24 hours later. Each press of the Timer button advances the timer

by 1 hour. After the last press the display returns to the temperature setting.

OPERATION MODE BUTTON

xPress the Mode button to cycle between 4 types

of air conditioner operation: Cool / Energy Saver / Fan Only / Dry.

Cool

dehumidify the room quickly. Use the Temp buttons to set the desired room temperature and use the Fan Speed button to set the desired fan circulation speed.

Energy Saver

fan turn off when the set temperature is achieved. Approximately every 3 minutes the fan turns on to allow the unit sensor to accurately determine if more cooling is needed.

Fan Only

the compressor does not run. Use the Fan Speed button to set fan speed to High, Medium or Low. In this mode, you can not adjust the set temperature.

- This mode is ideal for rainy and damp days

Dry

to dehumidify the room rather than cooling it significantly. Humidity is removed from the room by the combination of compressor operation and the fan speed fixed at Low. The compressor and fan turn off once the set temperature is reached. Fan speed cannot be adjusted in Dry mode.

- When the air conditioner is off, set it to

- When the air conditioner is on, set it to

- This mode is ideal on hot days to cool and

- In this mode the compressor and

- In this mode the fan circulates air but

TEMPERATURE CONTROL

The thermostat monitors room temperature to maintain the desired temperature. The thermostat can be set between 60 °F–86 °F (16 °C–30 °C). Press temperature setting.

REMOTE CONTROL SENSOR

Receives signal from Remote Control.

FILTER RESET

The Filter Reset LED lights up to notify you that the filter needs to be cleaned. After cleaning the filter, press Temp to turn off the Filter Reset light. (The filter reset must be done using the control panel, not the remote control.)

NOTE:

filter for more efficient operation. The LED light turns on after 250 hours of operation.

SMART CONNECT FUNCTION

SMART icon LED turns ON when unit is successfully connected to the internet.

AUTO RESTART

If the air conditioner turns off due to a power outage, it will restart automatically once the power is restored, with the same settings as were set before the unit turned off.

ENERGY SAVER

The unit defaults to the Energy Saver mode each time the unit is switched on except in Fan mode or when power is restored after an electrical power outage.

or arrows to increase or decrease

and together on the control panel

This feature is a reminder to clean the air

CAUTION

The remote control will not function properly if the AC infrared sensor is exposed to direct light or if there are obstacles between the remote controller and the air conditioner.

HOW TO USE

Inserting the Remote Control Battery

Push the release in with your thumb and remove the

cover on the back of the remote control.

Insert one new AAA 1.5 V battery, paying attention

to the polarity.

NOTE:

conditioner for use in the remote control.

Reattach the cover on the remote control.

NOTE

xDo not use a rechargeable battery. Make sure that the

battery is new.

xIn order to prevent discharge, remove the battery from

the remote control if the air conditioner is not going to be used for an extended period of time.

xKeep the remote control away from extremely hot or

humid places.

xTo maintain optimal operation of the remote control,

the remote sensor should not be exposed to direct sunlight.

One new battery is supplied with the air

Air Direction

Airflow can be adjusted by changing the direction of the air conditioner’s louvers.

$GMXVWLQJ+RUL]RQWDO$LUpRZ'LUHFWLRQ

The horizontal airflow is adjusted by moving the lever to the left or right.

$GMXVWLQJ9HUWLFDO$LUpRZ'LUHFWLRQ

Touch the horizontal louvers to adjust the airflow up or down.

Ventilation

Push the ventilation lever in to the closed position to maintain the best cooling performance. Pull the ventilation lever out to open the vent and draw fresh air into the room.

Close Open

NOTE:

turn off automatically to protect the compressor.

When the weather is extremely hot, the unit may

+ 29 hidden pages