Kenmore 79092850300, 79092850302, 79092851300, 79092851302, 79092852300 Owner’s Manual

...
ELECTRIC RANGE
Use & Care Guide
/f
ESTUFA ELECTRICA
Guia para el Uso y Cuidado
Models, Modelos 790. 9285_, 9385_
= color number, nemero de color
®
Table of Contents Product Record
Free-Standing Range Warranty ......................................... 2
Product Record ................................................................. 2
IMPORTANT SAFETY INSTRUCTIONS ....................... 3-4
Protection Agreements ...................................................... 5
Range Features .................................................................. 6
Before Setting Oven Controls ............................................ 7
Setting Surface Controls .................................................... 8
Surface Cooking ................................................................. 9
Setting Oven Controls ................................................ 10-13
Setting Warmer Drawer Controls ............................... 14-15
Self Cleaning .............................................................. 16-17
General Care & Cleaning ........................................... 18-20
Adjusting Your Oven Temperature .................................... 20
Before You Make a Service Call ................................. 21-22
Notes ................................................................................ 22
Sears Service ................................................... Back Cover
EspaSol ...................................................................... 25-48
In this space below, record the date of purchase, model and serial number of your product. You wilt find the model and serial number printed on an identification plate. This serial plate is located on the right side of the oven front frame in the storage or warmer drawer compartment. See bottom of this page for the serial plate location.
Model No. 790.
Serial No..................................
Date of Purchase
Save these instructions and your sales receipt for future reference.
Free-Standing Range Warranty
FULL ONE YEAR WARRANTY ON ALL PARTS
If,within one year from the date of installation, any partfails to function properly due to a defect in material orworkmanship,
Sears will repair or replace it, at our option, free of charge. Your ceramic glass smoothtop is covered by an additional 2nd through 5th year limited warranty. This warranty provides for
replacement for any defective surface heating element, deteriorated rubberized-silicone seal, or glass smoothtop that cracks due to thermal breakage. Damage or breakage due to customer abuse is not covered by this warranty.
If the product is subjected to other than private residential use, the above warranty is effective for only 90 days.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179
Serial Plate Location
\
You wilt find the model and serial number printed on an serial plate. The serial plate is located on the right side of the oven front frame in the storage or warmer drawer compartment.
Please see the illustration for exact location.
Remeber to record the serial number for future reference (See top of this page under Product Record).
_i_!_ __, _ _'_i__
Serial plate location; Open the Warmer Drawer (some models) orstoragedrawer(somemodels).
Important Safety Instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
Remove all tape and packaging before using the range. Destroy
the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.
Proper Installation]Be sure your appliance is properly
installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFPA No. 70 latest
edition and local electrical code requirements. Install only per
installation instructions provided in the literature package for this range.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range atthe circuit breaker orfuse box in case of an emergency.
User servicing--Do not repair or replace any part of the
appliance unless specifically recommended in the manuals. All other servicing should be done only by a qualified technician. This may reduce the risk of personal injury and damage to the range.
Never modify or alter the construction of a range by removing
leveling legs, panels,wire covers, anti-tip bracketslscrews, or any other part of the product.
All ranges can tip.
Injury to persons could result. Install anti-tip device packed with range.
See installation Instructions.
To reduce the risk of tipping,
the range must be secured by properly installed
antktip bracket provided with the range. To check ifthe bracket is installed properly, visually check that rear leveling leg is inserted into and
fully secured by the anti-tip bracket by removing
lower panel or storage drawer. For models with awarmer drawer, grasp the top rear edge of the range and carefully attempt to tilt it forward.
Refer to the Installation instructions for proper antFtip bracket installation.
r!,','f-'1:t,'ll_[q Stepping, leaning or sitting on the doors or
drawers of this range can result in serious injuries and also cause damage to the range. Do not allow children to climb or play
around the range. The weight of a child on an open door may cause the range to tip, resulting in serious burns or other injury.
FIVJV_'I:I_II_[ell DO not use the oven or warmer drawer (if
equipped) for storage.
_F_!_'I'_'_ Do not store items of interest to children in the
cabinets above a range or on the backguard of a range. Children
climbing on the range to reach items could be seriously injured.
Never Use Your Appliance for Warming or
Heating the Room.
Storage in or on Appliance]Flammable materials should not
be stored in an oven, warmer drawer, near surface units or in
the storage drawer. This includes paper, plastic and cloth items,
such as cookbooks, plasticware and towels, as well as flammable
liquids. Do not store explosives, such as aerosol cans, on or near _
the range.
Do Not Leave Children Alone--Children should not be left V_'_
alone or unattended in the areawhere appliance ]sin use.They _ should never be allowed to sit or stand on any part of the
appliance.
DO NOT TOUCH SURFACE UNITS, AREAS NEAR THESE UNITS, HEATING ELEMENTS OR INTERIOR SURFACES OF
THE OVEN. Both surface units and oven heating elements may
be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these
areas until they have had sufficient time to cool. Among these areas are the cook top, surfaces facing the cook top, the oven vent
openings and surfaces near these openings, oven door and window.
Wear Proper Apparel--Loose-fitting or hanging garments
should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces.
Do Not Use Water or Flour on Grease Fires--Smother the fire
with a pan lid, or use baking soda, adry chemical or foam-type extinguisher.
When heating fat or grease, watch it closely. Fat or grease may
catch fire if allowed to become too hot.
Use Only Dry Potholders--Moist or damp pothelders on hot
surfaces may result in burns from steam. Do not let potholders touch hot heating elements. Do not use a towel or other bulky cloth
instead of a potholder.
Do Not Heat Unopened Food Containers--Buildup of pressure
may cause container to burst and result in injury.
Remove the oven door from any unused range if it is to be
stored or discarded.
IMPORTANT]Do not attempt to operate the range during a power failure. If the power fails, always turn off the range. If the
range is not turned off and the power resumes, the range will begin to operate again. Once the power resumes, reset the clock and
oven function.
3
Important Safety Instructions
IMPORTANT INSTRUCTIONS FOR USING YOUR
COOKTOP
Know which knob controls each surface heating unit, Place a
pan of food on the unit before turning iton, and turn the unit off before removing the pan.
Use Proper Pan Size--Th isappliance isequipped with one or more surface units of different sizes. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result inignitionof clothing. Proper relationship
of utensil to element will also improve efficiency.
Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Elements--To reduce the risk of burns,
ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned
so that it is turned inward, and does not extend over adjacent surface units.
Never Leave Surface Elements Unattended at High Heat Settings--Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.
Do Not Immerse or Soak Removable Heating Elements i Heating elements should never be immersed in water. Heating elements clean themselves during normal operation.
Glazed Cooking Utensils--Only certain types of glass, glass/ ceramic, ceramic, earthenware, or other glazed utensils are suitable
for cook top service without breaking due to the sudden change in temperature. Checkthe manufacturer's recommendations for cook top use.
When flaming foods under a ventilating hood, turn the fan on.
IMPORTANT INSTRUCTIONS FOR USING YOUR
OVEN
Use Care When Opening Oven Door or Warmer Drawer (if
equipped)--Stand to the side ofthe range when opening the door of a hot oven, Let hot air or steam escape before you remove or
replace food in the oven,
Keep Oven Vent Ducts Unobstructed. The oven vent is located
underthe left rear surface element ifyour model is equipped with coil elements, Theoven vent islocated belowthe backguard for models equipped with ceramic-glass cook tops, Touching the surfaces in
this area when the oven isoperating may cause severe burns, Also, do notplace plastic orheat-sensitive items onor near the oven vent,
These items could melt or ignite,
Placement of Oven Racks. Always place oven racks in desired location while oven is cool, if rack must be moved while oven is hot
use extreme caution, Use potholders and grasp the rack with both hands to reposition, Do not let potholders contact the hot heating
elements in the oven, Remove all utensils from the rack before
moving.
Do not use the broiler pan without its insert. The broiler pan and itsinsert allow dripping fat to drain and be kept away from the high
heat of the broiler.
Do not cover the broiler insert with aluminum foil. Exposed fat
and grease could ignite.
Protective Liners--Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended inthis manual.
Improper installation of these liners may result in risk of electric
shock, or fire.
SELF CLEANING OVENS
Clean in the self*cleaning cycle only the parts listed in this Use & Care Manual. Before self cleaning the oven, remove the broiler pan and any utensils or foods from the oven,
Do Not Use Oven Cleaners--No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.
Do Not Clean Door Gasket--The door gasket is essential for agood seal. Care should be taken not to rub, damage or move the gasket.
The health of some bird s is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well- ventilated room.
IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE
Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area underneath each surface element. Do not allow grease to accumulate.
Kitchen cleaners and aerosols--Always follow the manufacturer's recommended directions for use. Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.
Clean Ventilating Hoods Frequently--Grease should not be allowed to accumulate on the hood or filter. Follow manufacturer's
instructions for cleaning.
COIL COOK TOP MODELS
Make Sure Reflector Pans or Drip Bowls Are in Place--Absence of these pans or bowls during cooking may subject wiring or components underneath to damage,
Protective Liners--Do not use aluminum foil to line surface unit drip bowls, or reflector pans. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock, or fire. improper installation of these liners may result
in risk of electric shock, or fire.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.
4
PROTECTION AGREEMENTS
In the U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore® appliance is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money and aggravation.
Purchase a Master Protection Agreement now and protect yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life of your new appliance. Here's what's included in the Agreement:
_Expert service by our 12,000 professional repair
specialists
5i(Unlmited service and no charge for parts and labor on
all covered repairs
5/("No-lemon" guarantee - replacement of your covered
product if more than three product failures occur within twelve months
5_Product replacement if your covered product can't be
fixed
_Annual Preventive Maintenance Check at your request
- no extra charge
_Fast help by phone -non-technical and instructional
assistance on products repaired in your home, plus convenient repair scheduling
_Power surge protection against electrical damage due
to power fluctuations
_Rental reimbursement if repair of your covered product
takes longer than promised
In Canada
Maintenance Agreements
Your purchase has added value because you can depend on Sears HomeCentral® for service. With over 2400
Service Technicians and access to over 900,000 parts and accessories, we have the tools, parts, knowledge and
skills to ensure our pledge: We Service What We Sell.
Your Kenmore® appliance is designed, manufactured and tested to provide years of dependable operation. Yet any
major appliance may require service from time to time. The Sears Maintenance Agreement offers you an
outstanding service program, affordably priced.
The Sears Maintenance Agreement
is your way to buy tomorrow's service at today's price.
Eliminates repair bills resulting from normal wear and tear.
Provides for non-technical and instructional assistance. F_;
Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your appliance is in proper running F_ condition. U_
Some limitations apply. For information concerning Sears Canada Maintenance Agreements, call
1-800-361-6665.
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment
online.
Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Master Protection Agreement today!
Some limitations and exclusions apply.
For prices and additional information,
call 1-800-827-6655.
Sears Installation Service
For Sears guaranteed professional installation of home
appliances and items like garage door openers and water heaters, in the U.S.A. call 1-800-4-MY-HOME®
5
Range Features
Your
Electric Range
Features
At a Glance
Manual Warm & Ready" ElectronicOven Control Oven Single Drawer Control and with Cloak and
Light Element Indicator Light Kitchen"Rmer Single Switch Control (some models) I Control Indicator Light
Simmer Select _ \ _ [
Element Contro ( % --\ _ ............................J
(some models).._,_ _ I1_1 _ ;',_
Simmer Select. _ __ : m ...............
PushButton ......::
(some models) :
oo,,+m°n,.... --
Cooktop ......_. ......... .........................................
Automatic Oven
Door Light Switch" (some models)
Interior Oven
Light
V W_ + "
illl \ J m _ll
Element "Element On"
Single
Element
Control
-- Easy to Clean Cooktop
Self-Clean Door Latch
Self-Gleaning Oven Interior
Adjustable
Oven Racks
Large1Piece DoorHandle
(sty_vadas withmodel)
Full Width Oven Door with
Window
(stylevaries
with model)
(1)BroilPen and (1) Broil PanInsert
Note: The features of your range will vary according
to model.
Removable
6" Coil Surface
Element
Removable Element Drip Bowls (colors
may varyby model)
Removable
8' Coil Surface
Element
Coil Element Cooktop
Drawer (some models) or Storage Drawsr
with Integrated Handle
LevelingLegs and
Anti-tipBracket (included)
Removable 8"Coil Surface
" Element
6' Coil Surface Element
6
Before Setting Oven Controls
Oven Vent Location For models equipped with coiled surface elements, the oven vent is located
under the left rear surface element. When the oven is on, warm air flows
through the left rear element. This venting is necessary for proper air circulation in the oven and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Removing & Replacing Oven Racks
To remove, pullthe rack forward until itstops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.
Rack
Food Rack Position Broiling meats, chicken or fish 1,2 or 3
Cookies, cakes, pies, biscuits& muffins 3 or 4 Frozen pies, angel food cake, yeast, bread, 5
casseroles, small cuts of meat or poultry Turkey,roast or ham Roasting shelf
'Roasting
Shelf
(somemodels)
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
ELEMENT ON Indicator Light(s)
Your range is equipped with one or more control lights that will glow on your range-- the
Element On indicator light(s). The ELEMENT ON indicator light(s) are located on the control panel and will glow when any surface element is turned on. A quick glance at these lights after cooking is an easy check to be sure all surface controls are turned off.
7
Setting Surface Controls
To Operate Single Radiant Surface Elements (all models)
To Operate the Surface Elements:
1. Place cooking utensil on the surface element.
2.
Push in and turn the surface control knob in either direction to the desired
setting. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The control knobs do not have to be set exactly on a particular setting. Use the settings as a guide and adjust the control knob as
needed.
.
When cooking is completed, turn the surface element off before removing the pan. Note: The surface "Element On" indicator light(s) will glow when one or more elements are turned on. A quick glance at these indicator light(s) when cooking is finished is an easy check to be sure all surface elements are turned
iiiiiiOOiSeAS!i
To Operate Simmer Select Surface Element (some models
off. See chart below for recommended control settings for different types of foods.
The left front element control may be used as a normal element or as a simmer element. The "Simmer Select" feature heats the element at a much lower temperature and more precisely than when used as a normal surface element. You
may switch between normal cooking and the Simmer Select feature at any time during the cooking process. When using the element control for normal cooking, all of the settings on the control knob (LO to HI) function as normal.
1. To activate the Simmer Select feature, push in the Simmer button located below the left front control knob. The Simmer Select indicator light will glow and remain on while simmering.
2. Turn the surface control knob to the desired simmer setting within the dark band on the control knob (LO to 4). Use the marks as a guide and adjust the control knob from LO to 4 as needed (see illustration below).
3. To return to normal cooking, push in and release the "Simmer Select" button and the indicator light will turn off. When cooking is completed, be sure to set the control knob to the OFF position.
The suggested settings found in the chart below are based on cooking in medium-weight aluminum pans with lids. Settings may vary when using other types of pans.
STANDARD SURFACE ELEMENTS
Setting Type of Cooking HIGH (HI - 9) Start most foods, bring water to a boil, pan broiling MEDIUM HIGH (7 - 8) Continue a rapid boil, fry, deep fat fry MEDIUM (5 - 6) Maintain a slow boil, thicken sauces and gravies, steam vegetables MEDIUM LOW (2 - 4) Keep foods cooking, poach, stew
OBl[/Ot_
Simmer SelectSurface Control
LOW (LO - 1) Keep warm, melt, simmer
SIMMER SELECT SURFACE ELEMENT (some models)
shownin LO setting
Max. Simmer (4)
Larger quantities of food, stews and soups
Min. Simmer (LO) Smaller quanitites of food, delicate foods, melting chocolate
or butter
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the surface elements.
8
Loading...
+ 16 hidden pages