TO THE INSTALLER: PLEASE LEAVE THIS INSTRUCTION BOOK WITH THE UNIT.
TO THE CONSUMER: PLEASE READ AND KEEP THIS BOOK FOR FUTURE REFERENCE.
PARA EL INSTALADOR: FAVOR DE DEJAR ESTE MANUAL DE INSTRUCCIONES CON LA UNIDAD.
PARA EL CONSUMIDOR: FAVOR DE LEER Y GUARDAR ESTE MANUAL PARA FUTURAS REFERENCIAS.
Super Capacity with ULTRABAKE™ System
Capacidad extra con el Sistema ULTRABAKE™
8274183
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
TABLE OF CONTENTS
WE SERVICE
WE SERVICE WHAT WE SELL......................................................2
Your purchase has added value because you can depend on
Sears Home Central
specialists and access to over 4.2 million parts and accessories,
we have the tools, parts, knowledge and skills to ensure our
pledge: We Service What We Sell.
Sears Maintenance Agreements
Your Kenmore appliance is designed, manufactured and tested
to provide years of dependable operation. Yet any major
appliance may require service from time to time. The Sears
Maintenance Agreement offers you an outstanding service
program, affordably priced.
The Sears Maintenance Agreement
■ Is your way to buy tomorrow’s service at today’s price.
■ Eliminates repair bills resulting from normal wear and tear.
■ Provides for non-technical and instructional assistance.
■ Even if you don’t need repairs, provides an annual Preventive
Maintenance Check, at your request, to ensure that your
appliance is in proper running condition.
Some limitations apply. For more information, call
1-800-827-6655.
®
for service. With over 12,000 trained repair
WARRANTY
FULL ONE-YEAR WARRANTY ON ALL PARTS
For one year from the date of purchase, when this range is
installed and operated according to instructions provided in the
Installation Instructions and Use & Care Guide, Sears will repair
this range, free of charge, if defective in material or workmanship.
WARRANTY RESTRICTION
If the range is subject to other than private family use, the above
warranty coverage is effective for only 90 days.
WARRANTY SERVICE
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE
NEAREST SEARS SERVICE CENTER IN THE UNITED STATES.
This warranty applies only while the product is in use in the
United States. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
For Sears warranty information in the United States call 1-800469-4663.
Sears, Roebuck and Co.
D/817WA, Hoffman Estates, IL 60179
PRODUCT RECORD
In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the
model and serial number label, located as shown in the Parts and
Features section of this book. Have this information available to
help you quickly obtain assistance or service when you contact
Sears concerning your appliance.
Model number 665._______________________________________________
Serial number ___________________________________________________
Purchase date ___________________________________________________
Save these instructions and your sales receipt for future
reference.
2
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can
happen if the instructions are not followed.
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
–
or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
–
Do not try to light any appliance.
•
Do not touch any electrical switch.
•
Do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
•
instructions.
If you cannot reach your gas supplier, call the fire department.
•
Installation and service must be performed by a qualified installer, service agency or
–
the gas supplier.
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list
of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and
requires businesses to warn of potential exposure to such substances.
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde,
carbon monoxide, toluene, and soot.
3
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door
without the anti-tip bracket fastened down properly.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns to children
and adults.
Anti-Tip Bracket
Range Foot
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip bracket.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical
shock, injury to persons, or damage when using the
range, follow basic precautions, including the
following:
WARNING:
■
TIPPING OF THE RANGE, THE RANGE MUST BE
SECURED BY PROPERLY INSTALLED ANTI-TIP
DEVICES. TO CHECK IF THE DEVICES ARE
INSTALLED PROPERLY, SLIDE RANGE FORWARD,
LOOK FOR ANTI-TIP BRACKET SECURELY
ATTACHED TO FLOOR, AND SLIDE RANGE BACK
SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
CAUTION:
■
children in cabinets above a range or on the
backguard of a range – children climbing on the
range to reach items could be seriously injured.
■
Proper Installation – The range, when installed, must
be electrically grounded in accordance with local
codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70.
range is properly installed and grounded by a
qualified technician.
■
This range is equipped with a three-prong grounding
plug for your protection against shock hazard and
should be plugged directly into a properly grounded
receptacle. Do not cut or remove the grounding prong
from this plug.
TO REDUCE THE RISK OF
Do not store items of interest to
Be sure the
■
Disconnect the electrical supply before servicing the
appliance.
■
Never Use the Range for Warming or Heating the
Room.
■
Injuries may result from the misuse of appliance doors
or drawers such as stepping, leaning, or sitting on the
doors or drawers.
■
Maintenance – Keep range area clear and free from
combustible materials, gasoline, and other flammable
vapors and liquids.
■
Storage in or on the Range – Flammable materials
should not be stored in an oven or near surface units.
■
Top burner flame size should be adjusted so it does
not extend beyond the edge of the cooking utensil.
For self-cleaning ranges –
Before Self-Cleaning the Oven – Remove broiler pan
■
and other utensils. Wipe off all excessive spillage
before initiating the cleaning cycle.
SAVE THESE INSTRUCTIONS
4
PARTS AND FEATURES
This manual covers several different models. The range you have purchased may have some or all of the items listed. The locations and
appearances of the features shown here may not match your model.
Control Panel
Range
1
2
3
4
5
6
7
8
Surface Burner Indicator Light
1.
Left Rear Control
2.
Left Front Control (Power Burner)
3.
Right Front Control (Power Burner
4.
on some models)
11
12
13
14
15
16
17
Right Rear Control
5.
(SURESIMMER™)
18
19
9
10
Oven Vent
1.
Sealed Surface Burner
2.
Burner Grate System
3.
Power Burner
4.
STURDIGLIDE™ Half
5.
Rack with removable
insert (on some
models)
STURDIGLIDE Oven Rack
6.
with integrated handle (on
some models)
Anti-Tip Bracket
7.
Door Stop clip
8.
Model and Serial Number
9.
Plate (behind left side of
storage drawer)
Storage Drawer
10.
Electronic Oven Control
11.
SURESIMMER Burner
12.
Power Burner (on some
13.
models)
Control Panel
14.
Automatic Oven Light
15.
Switch
Broil Element (not shown)
16.
Gasket
17.
Self-Clean Latch
18.
Gas Regulator
19.
5
COOKTOP USE
Turn knob anywhere between HI and LO. Use the following
2.
chart as a guide when setting heat levels.
SETTINGRECOMMENDED USE
Control Knobs
WARNING
Fire Hazard
Do not let the burner flame extend beyond the
edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in
death or fire.
Electric ignitors automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or while the grate
is vacant.
To Set:
Push in and turn knob counterclockwise to LITE.
1.
All four surface burners will click. Only the burner with the
control knob turned to LITE will produce a flame.
LITE
HI
Mid-range
(between HI and LO)
LO
Power Burner
(left front burner)
SURESIMMER™
(right rear burner)
■ Light the burner.
■ Start food cooking.
■ Bring liquid to a boil.
■ Hold a rapid boil.
■ Quickly brown or sear food.
■ To fry chicken.
■ Maintain a slow boil.
■ Fry or sauté foods.
■ Cook soups, sauces and gravies.
■ Keep food warm.
■ To simmer.
■ Provide highest heat setting
■ Provide lowest simmer/heat
setting.
■ Melt chocolate or butter.
REMEMBER: When range is in use or during the
Self-Cleaning cycle, the entire cooktop area may
become hot.
Power failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to
setting.
Power Burner
The left front burner is designed to give ultra-high power when it
is fully on. It can be used to rapidly bring liquid to a boil and to
cook large quantities of food. On some models both front burners
are Power Burners.
6
Sealed Surface Burners
1
2
1
2
3
1. Burner cap
2. Burner base
3. Alignment pins
4. Ignitor
5. Gas tube opening
To Clea n :
IMPORTANT:
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
Remove the burner cap from the burner base and clean
1.
according to “General Cleaning” section.
Clean the gas tube opening with a damp cloth.
2.
Clean clogged burner ports with a straight pin as shown. Do
3.
not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a Sears
4
trained repair specialist.
Before cleaning, make sure all controls are off and
5
Replace the burner cap, making sure the alignment pins on
4.
the cap are properly aligned with the burner base.
IMPORTANT:
ventilation air around the burner grate edges.
Burner cap:
surface burner. A clean burner cap will help prevent poor ignition
and uneven flames. Always clean the burner cap after a spill-over
and routinely remove and clean the caps according to the
“General Cleaning” section.
Gas tube opening:
opening for the burner to light properly.
soil and do not allow spills, food, cleaning agents or any
other material to enter the gas tube opening.
spillovers by always using a burner cap.
Do not obstruct the flow of combustion and
Always keep the burner cap in place when using a
Gas must flow freely throughout the gas tube
Keep this area free of
Protect it from
1
2
1. 1-1¹⁄₂" (25-38 mm)
2. Burner ports
Burner ports:
and shape as shown above. A good flame is blue in color, not
yellow. Keep this area free of soil and do not allow spills, food,
cleaning agents or any other material to enter the burner ports.
Check burner flames occasionally for proper size
1. Incorrect
2. Correct
Turn on the burner. If the burner does not light, check cap
5.
alignment. If the burner still does not light, do not service the
sealed burner yourself, but contact a Sears trained repair
specialist.
7
SURESIMMER™
The SURESIMMER burner is an adjustable heat setting for more
precise simmering and low temperature cooking. It is the right
rear burner. When the SURESIMMER burner is not on, the right
rear burner will function as usual.
Cookware
IMPORTANT:
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides, a well-
fitting lid and the material should be of medium-to-heavy
thickness.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A non-stick finish has
the same characteristics as its base material. For example,
aluminum cookware with a non-stick finish will take on the
properties of aluminum.
Use the following chart as a guide for cookware material
characteristics.
Never leave empty cookware on a hot surface
To Use :
Push the right rear knob in and turn counterclockwise to
1.
“SURESIMMER”.
Push in and turn knob to OFF when finished.
2.
Home Canning
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
■ Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than 1 in.
(2.5 cm) outside the cooking area.
■ Do not place canner on two surface cooking areas, elements
or surface burners at the same time.
■ On ceramic glass models, only use flat-bottomed canners.
■ On coil element models, the installation of a Canning Unit Kit
is recommended. If not installed, the life of the coil element
will be shortened. See back cover for ordering instructions.
■ For more information, contact your local U.S. Government
Agricultural Department Extension Office. Companies who
manufacture home canning products can also offer
assistance.
COOKWARECHARACTERISTICS
*Aluminum
■ Heats quickly and evenly.
■ Suitable for all types of cooking.
■ Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Ceramic or
Ceramic glass
■ Heats slowly and evenly.
■ Good for browning and frying.
■ Maintains heat for slow cooking.
■ Rough surfaces may scratch cooktop.
■ Follow manufacturer’s instructions.
■ Rough surfaces may scratch cooktop.
■ Heats slowly, but unevenly.
■ Ideal results on low to medium heat
settings.
*Copper
Earthenware
Porcelain
■ Heats very quickly and evenly.
■ Follow manufacturer’s instructions.
■ Use on low heat settings.
■ See stainless steel or cast iron.
enamel-onsteel or cast
iron
Stainless steel
■ Heats quickly, but unevenly.
■ A core or base of aluminum or copper
on stainless steel provides even
heating.
*Aluminum and copper may be used as a core or base in
cookware. When used as a base it can leave permanent marks
on the cooktop or grates.
8
ELECTRONIC OVEN CONTROL
LIGHT
AVERAGE
HEAVY
Display
1.
CLOCK
2.
TIMER
3.
Oven Light/Oven Lockout
4.
5
6
5.
6.
7.
8.
7
Oven Selectors
SELECT CLEAN™ Self-Clean
(on some models)
Temperature Setting
Timed Cooking
Display
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 5 seconds. Then the time, “PF” and a picture of a
cooktop will appear on the display.
Any other time “PF” and a picture of a cooktop appears, a power
failure occurred. To remove “PF” and to reset the clock, press
OFF/CANCEL.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
Start/Enter
The START/ENTER pad begins any oven function except the
Timer. If not pressed within 5 seconds after pressing a pad,
“START?” will appear on the display as a reminder. If not pressed
within 5 minutes after pressing a pad, the display will show the
time of day and the programmed function will be cancelled.
Off/Cancel
The OFF/CANCEL pad stops any oven function except for the
Clock, Timer and Cooktop or Oven Lockouts.
After pressing OFF/CANCEL, the display will show the time of
day or, if the minute timer is also being used, the time remaining.
1
8
3
2
9
101112
4
HOUR
9.
MINUTE
10.
START/ENTER
11.
OFF/CANCEL
12.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
Press CLOCK.
1.
Press the HOUR/MIN “up” or “down” arrow pads until the
2.
correct time of day shows on the display.
Press CLOCK or START/ENTER.
3.
To n e s
Tones are audible signals, indicating the following:
One tone
■ Valid pad press
■ Oven is preheated
■ Function has been entered
Three tones
■ Invalid pad press
Four tones
■ End-of-cycle
■ Reminder, repeating each minute after the end-of-cycle tones
9
Error Tones
Error tones indicate a problem with the electronic oven control.
An error code will appear in the display.
Tone Volume
The volume can be adjusted between high and low.
To Cha ng e:
tone will sound and either “Snd HI” or “Snd Lo” will appear on the
display. Press and hold DELAY START again for 5 seconds to
change to desired setting.
To remove “Snd on”, “Snd OFF”, “rEP on”, “Snd HI” or “Snd Lo”
press any pad, and the time of day will appear on the display.
Press and hold DELAY START for 5 seconds. A short
Reminder Tones
Reminder tones are four 1-second tones which indicate that the
set time has expired for a timer or a timed oven control function.
Oven Lockout
The Oven Lockout prevents unintended use of the control panel
command keypads. The oven can only be locked out when the
oven is not in use or the oven control has not been set.
The oven will remain locked out after a power failure if it was
locked before the power failure.
To Lock/Unlock Oven:
Press and hold OVEN for 5 seconds. A single tone will sound and
“Loc” and a picture of a lock will appear on the display.
Three tones will sound when the oven is locked and any
command pad other than CLOCK, TIMER, START/ENTER, OFF/
CANCEL, TOP or OVEN has been pressed.
To unlock oven, press and hold OVEN for 5 seconds. "Loc” and a
picture of a lock will disappear from the display.
Timer
To Turn Ton es Of f/On :
short tone will sound and “rEP OFF” will appear on the display.
Repeat to turn back on.
Press and hold SET/OFF for 5 seconds. A
Timed Cooking
To Turn Ton es Off /On:
will sound and “Snd OFF” will appear on the display. Repeat to
turn back on.
Press and hold COOK TIME. A short tone
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change:
will sound and the temperatures displayed will switch to “C°”.
Repeat to change back to Fahrenheit.
Press and hold BROIL for 5 seconds. A short tone
Timer
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time. The Timer does not start
or stop the oven.
To Set:
Press TIMER SET.
1.
Press the HOUR/MIN “up” or “down” arrow pads until the
2.
correct length of time shows on the display.
Press START/ENTER or TIMER SET.
3.
The Timer will begin counting down after the Timer is started.
The display will count down in hours and minutes if remaining
time is one hour or more, and in minutes and seconds if
remaining time is less than one hour.
When the set time ends, four 1-second tones, if enabled, will
sound, then reminder tones will sound every minute.
Press TIMER OFF anytime to cancel the Timer and/or stop
4.
reminder tones.
Oven Temperature Control
IMPORTANT:
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will cook cooler by the adjustment
amount. No sign means the oven will cook warmer by the
adjustment amount. Use the following chart as a guide.
ADJUSTMENT °F
(ADJUSTMENT °C)
10°F (6°C)...a little more
20°F (12°C)...moderately more
30°F (18°C)...much more
-10°F (-6°C)...a little less
-20°F (-12°C)...moderately less
-30°F (-18°C)...much less
To Adju s t Oven Te m peratu re Calib ration:
Press and hold BAKE for 5 seconds until the oven display
1.
shows the current calibration, for example, “0° CAL”.
Press the TEMP “up” or “down” arrow pad to increase or to
2.
decrease the temperature in 10°F (6°C) amounts. The
adjustment can be set between 30°F (18°C) and -30°F
(-18°C).
Press START/ENTER.
3.
Do not use a thermometer to measure oven
COOKS FOOD
10
OVEN USE
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 2 in.
(5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
Aluminum Foil
IMPORTANT:
liners or cookware because permanent damage will occur to the
oven bottom finish.
■ Do not block or cover the oven bottom vents.
■ Do not cover entire rack with foil because air must be able to
move freely for best cooking results.
■ To catch spills, place foil on rack below dish. Make sure foil is
at least 1 in. (2.5 cm) larger than the dish and that it is turned
up at the edges.
Do not line the oven bottom with any type of foil,
Positioning Racks and Bakeware
IMPORTANT:
door or bottom. Permanent damage will occur to the porcelain
finish.
RACKS
Position racks before turning the oven on. Do not move racks
with bakeware on them. Make sure racks are level. To move a
rack, pull it out to the stop position, raise the front edge, then lift
out. Use the following illustration and chart as a guide.
Never place food or bakeware directly on the oven
NUMBER OF
PA N ( S )
1Center of rack.
2Side by side or slightly staggered.
3 or 4Opposite corners on each rack. Make sure
POSITION ON RACK
that no bakeware piece is directly over
another.
STURDIGLIDE™ Oven Racks
Rack with Integrated Handle
The integrated handle area makes pulling out the rack easy. The
opening is large enough for a potholder or oven mitt.
Half-Rack with Removable Insert
The half-rack with removable insert is a space maximizer. When
the two are attached, they make a full rack. The insert can also be
used on the counter for a cooling rack.
Do not place more than 25 pounds on the half-rack.
FOODRACK POSITION
Frozen pies, large roasts, turkeys,
angel food cakes
Bundt cakes, most quick breads, yeast
breads, casseroles, meats
Place a full rack on position 1 or 2, and the half-rack on
1.
position 3 or 4.
Place large items on the right side of the full rack.
2.
Place deeper, covered dishes on the left side of the full rack.
3.
Place shallow dishes on the half-rack.
4.
When finished cooking, carefully remove items.
5.
2
11
Bakeware
1
The bakeware material affects cooking results. Follow
manufacturer’s recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
Oven Vent
BAKEWARE/
RESULTS
Light colored
aluminum
■ Light golden
crusts
■ Even browning
Dark aluminum
and other
bakeware with
dark, dull and/or
non-stick finish
■ Brown, crisp
crusts
Insulated cookie
sheets or baking
pans
■ Little or no
bottom
browning
Stainless steel
■ Light, golden
crusts
■ Uneven
browning
Stoneware
■ Crisp crusts
Ovenproof
glassware,
ceramic glass or
ceramic
■ Brown, crisp
crusts
RECOMMENDATIONS
■ Use temperature and time
recommended in recipe.
■ May need to reduce baking
temperatures 25°F (15°C).
■ Use suggested baking time.
■ For pies, breads and casseroles, use
temperature recommended in
recipe.
■ Place rack in center of oven.
■ Place in the bottom third of oven.
■ May need to increase baking time.
■ May need to increase baking time.
■ Follow manufacturer’s instructions.
■ May need to reduce baking
temperatures 25°F (15°C).
1. Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Doing so will cause poor air
circulation, affecting cooking and cleaning results. Never set
plastics, paper or other items that could melt or burn near the
oven vent.
Baking and Roasting
1
2
1. Broil element
2. Bake element
ULTRABAKE™
The ULTRABAKE system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. This feature is automatically
activated when the oven is in use.
If the oven door is opened during baking and roasting, the broil
element will turn off immediately and the bake element will turn
off in 2 minutes. They will come back on once the door is closed.
To Bake or Roast:
Before baking and roasting, position the racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven to preheat before putting food
in, unless recommended in the recipe.
Press BAKE.
1.
Press the TEMP “up” or “down” arrow pad to enter a
temperature other than 350°F (177°C). The bake range can be
set between 170°F and 500°F (77°C and 260°C).
Temperature Management System
12
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.