Kenmore 640-04005537-8 Owner’s Manual

Use & Care Guide

Manual de Uso y Cuidado

English / Espa_ol

Model / Modelo: 415.16106210
Item / Art[culo: 640-04005537-8

@ @ @

q@S

P/N 307010085
Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com

www.kmart.com

Model 464424312 " 464424512 " Aug-29-11

If you smell gas:
|. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open lld.

4. If odor continues, keep away from the appliance
and immediately call your gas supplier or your

fire department.

1. Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of

this or any other appliance.

2. An LP Tank not connected for use shall not

be stored in the vicinity of this or any other

appliance.

Call the Grill Information Center for Help and Paris

Missing Parts? Assembly Questions?Operation Problems?
Before returning grill to store, call 1-800-241-7548

Product Record
iMPORTANT: Fillout the product record informationbelow.

Model Number

Serial Number

See rating label on grill for serial number.

CALIFORNIA PROPOSITION 65

1. Combustion by-products produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, and other

reproductive harm.

2. This product contains chemicals, including lead
and lead compounds, known to the State of
California to cause cancer, birth defects or other
reproductive harm.

Wash your hands after handling this product.

Installation Safety Precautions

- Use grill, as purchased, only with LP (propane) gas and the
regulator/valve assembly supplied.

" Grill installation must conform with local codes, or in the

absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane

Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.

" All electrical accessories (such as a rotisserie) must be

electrically grounded in accordance with local codes, or

National Electrical Code, ANSI / NFPA 70 or Canadian
Electrical Code, CSA C22.1. Keep any electrical cords and/or

fuel supply hoses away from any hot surfaces.

" Grill is not for use in or on recreational vehicles and/or boats.
" This grill is safety certified for use in the United States and/or

Canada only. Do not modify for use in any other location.
Modification will result in a safety hazard.

Safety Symbols

The symbols and boxes shown below explain what each heading
means. Read and follow all of the messages found throughout

the manual.

Date Purchased

To Installer/Assembler: Leave these instructions with
consumer.

To Consumer: Keep this manual for future reference.

CAUTION

Some parts may contain sharp edges, especially
as noted in these instructions.

Wear protective gloves if necessar%

CAUT'O.

For resldentlal use only. Do not use for commercial

cooking.

© 2011 I<CD IP, LLC

2 ° 464424312 ° 464424512

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

WARNING: Be alert to the possibility of serious bodily injury
if the instructions are not followed. Be sure to read and

carefully follow all of the messages.

CAUTION

CAUTION: Indicates a potentially hazardous situation which

if not avoided, may result in minor or moderate injury.

Printed in China

For Your Safety ...................................... 2

Grill Information Center .............................. 2

KENMORE GRILL WARRANTY

Product Record Information........................... 2

Safety Symbols ...................................... 2

InstallationSafety Precautions......................... 2

Kenmore GrillWarranty .............................. 3

GrillingGuide ..................................... 4-7

Use and Care ..................................... 8-13

PartsList........................................... 14

Parts Diagram ...................................... 15

Assembly ....................................... 16-24

Troubleshooting ................................. 25-27

Repair Protection Agreements
Congratulations on making a smart purchase. Your new

Kenmore product is designed and manufactured for years of
dependable operation. But like all products, it may require

repair from time to time. That's when having a Repair Protection
Agreement can save you money and aggravation.

Here's what the Repair Protection Agreement _ includes:

[] Expert service by our 10,000 professional repair specialists
[] Unlimited service and no charge for parts and labor on all

covered repairs

[] Product replacement up to $1500 if your covered product

can't be fixed

[] Discount of 25% from regular price of service and related

installed parts not covered by the agreement; also, 25% off
regular price of preventive maintenance check

[] Fast help by phone - we call it Rapid Resolution -

phone support from a Sears representative. Think of us

as a "talking owner's manual."

Once you purchase the Repair Protection Agreement, a
simple phone call is all that it takes for you to schedule service.

You can call anytime day or night, or schedule a service
appointment online.

The Repair Protection Agreement is a risk-free purchase. If
you cancel for any reason during the product warranty period,

we will provide a full refund. Or, a prorated refund anytime after
the product warranty period expires. Purchase your Repair

Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827-6655.

_Coverage in Canada varies on some items. For full details
call Sears Canada at 1-800-361-6665.

Sears Installation Service
For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the
U.S.A. or Canada call 1-800-4-MY-HOME®.

One Year Full Warranty on Kenmore Grill
If this grill fails due to a defect in material or workmanship

within one year from the date of purchase, call 1-800-4-MY-
HOME ® to arrange for free repair (or replacement if repair

proves impossible).

Five-Year Limited Warranty on Burners
For five years from the date of purchase, any burner that

rusts through will be replaced free of charge. After the first
year from the date of purchase, you pay for labor if you wish

to have it installed.

All warranty coverage excludes ignitor batteries and grill part
paint loss, discoloration or surface rusting, which are either

expendable parts that can wear out from normal use within
the warranty period, or are conditions that can be the result

of normal use, accident or improper maintenance.

All warranty coverage isvoid if this grill is ever used for
commercial or rental purposes.

All warranty coverage applies only if this grill is used in the
United States.

This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

Sears Brands Management Corp.

Hoffman Estates, IL 60179

* Read and follow all Safety, Assembly,

and Use and Care Instructions in this

Guide before assembllng and cooking
with this grill.

" Failure to follow all instructions in this

Use and Care Guide may lead to fire or
exploslon, which could result in property
damage, personal injury or death.

This Grill is for Outdoor Use Only

Tools needed for assembly:

Adjustable wrench (not provided)
Screwdriver (not provided)

7/16" Combination wrench (not provided)

464424312 ° 464424512 ° 3

First Time Use
Read your Assembly Manual and ensure the grill is put

together properly. Remove all Point-of-Purchase advertising
material from all grill surfaces before first use. We

recommend operating your grill on its highest setting for 15-
20 minutes prior to your first use. This aids in removing the
oils used during manufacturing.

Lava Rock / Briquettes
This gas grill has been designed, engineered, and tested to
be used with flame tamers or heat diffuser plates to provide
more even heating, improve the cleaning process, and
reduce flare-ups. The addition of after market lava rocks,

charcoal, or briquettes of any type will cause poor
combustion and increase the likelihood of a grease fire, and
is not recommended. Using briquettes, lava rock, or
charcoal in this grill will void your warranty. For extra
smoke flavor, we recommend using a smoker box with wood

chips.

Temperature - Convective Grills ONLY.
The temperature gauge in the hood of your new grill

measures air temperature. The air temperature inside your

grill will never be as hot as the temperature at the cooking

surface.

Note: Since 1995, all regulators (the part that attaches to

the gas tank to regulate the flow of gas) have included a
safety feature that restricts gas flow in the event of a gas

leak. You can inadvertently activate this safety feature
without having a gas leak. This typically occurs when you
turn on the gas using the grill control knob before you turn

on the LP tank valve. If the gas regulator safety feature
activates, the grill will only reach temperatures between
250°F and 300°F even with all burners on the high setting.

Regulator Coupling Nut

If your grill is not getting hotter than 250°F to 300°F these
steps should be taken first to reset the gas regulator safety

device:

1+Open the grill lid+

2. Turn off all knobs on the control panel in front.
3+ Turn off the tank knob.

4. Disconnect the regulator from the LP tank.

5. Wait 30 seconds.

6. Reconnect the regulator to the LP tank.

Z Slowly open the LP tank knob all the way+ Do not put

excessive force on the valve at the full open position to
avoid damaging the valve.

8+ Turn on the appropriate control knob and light the grill

per the instructions on the control panel

An illustration of this process is included in this Use & Care
Guide. See Troubleshooting section for additional

information.

4 ° 464424312 ° 464424512

Pre-Heating Your Grill
Just like your home oven, your grill should be pre-heated to

provide optimum performance. Pre-heat the grill on high for

10-15 minutes - longer if weather conditions require. Please

refer to the lighting instructions inside the Use & Care Guide
if you have questions about how to light your grill+ A

match-light chain and hole is provided for your
convenience.

Outdoorgrillingisreallyquitesimple.You'llsucceedwith
burgers,dogs,orsteaksusuallyonyourveryfirsttry. With

experience,youwilllearnhowtoworkwithyourgrill,
creatingmoreimaginativemealsallthetime.This
knowledgemakesuptheartofgrilling.Beforeyoustart
grilling,organizeyourfoodaccordingtocookingtechnique
andrequiredcookingtime,andoptimizetheuseofyour

grillingarea.
DirectCooking

Directcookinginvolvesgrillingyourmeatdirectlyoverhigh
heat.Itisperfectforsearingsteaks,chops,andother

smallerpiecesofmeatandvegetablesthatquicklymake

theirwaytothetable.

RotisserieCooking

Rotisseriecookingisbestfor'round'meat,suchaslarge

roasts,wholepoultry,andpork.Itgenerallyrequiresan
accessorymotorandspitrodthatallowsthemeattobe
turnedata constantspeed.Rotisseriecookingisbestdone
infrontofaspecialrotisserieburner,orutilizinganindirect
cookingburnerarrangement.Apancanbeplaced

underneaththemeatto catchgreaseandfooddrippings,
andhelpsminimizeclean-up.

IndirectCooking
Indirectcookingutilizesselectburnerstocirculateheat

throughoutthegrill,withoutdirectcontactbetweenthe

meatandtheflame.Themeatisplacedovertheburner

thatis'off_.Thismethodisgenerallyusedtoslowcook

largecutsofmeatandpoultry.Apancanbeplaced
underneaththemeattocatchgreaseandfooddrippings,

andhelpsminimizeclean-up.

FoodSafety

Foodsafetyisaveryimportantpartofenjoyingthe
outdoorcookingexperience.Tokeepfoodsafefrom

harmfulbacteria,followthesefourbasicsteps=

Clean= Wash hands, utensils, and surfaces with hot soapy
water before and after handling raw meat.
Separate= Separate raw meats from ready-to-eat foods to
avoid cross contamination. Use a clean platter and utensils
when removing cooked foods.

Cook: Cook meat and poultry thoroughly to kill bacteria.

Use a thermometer to ensure proper internal food
tem peratu res.
Chill: Refrigerate prepared foods and leftovers promptly.

464424312 ° 464424512 ° 5

Cooking on your new grill is a hands-on experience, and it
is recommended to remain outside with your grill while

cooking. Grilling can be affected by many external
conditions. In cold weather, you will need more heat to
reach an ideal cooking temperature, and grilling may take
longer. The meat's internal temperature and thickness can
also affect cooking times. Cold and thicker meats will take
longer to cook.

Internal Meat Temperatures
Meat cooked on a grill often browns very fast on the

outside. Therefore, use a meat thermometer to ensure it has
reached safe internal temperatures.

USDA _ Recommended Safe Minimum internal Temperatures
Beef, Veal, Lamb and Pork - Whole Cuts _ 145 ° F
Fish 145 ° F
Beef, Veal, Lamb and Pork - Ground 160 ° F

Egg Dishes 160 ° F
Turkey, Chicken & Duck - Whole, Pieces & Ground 165 ° F

United States Department of Agriculture

_AIIow meat to rest three minutes before carving or consuming.

Please refer to the USDA for complete, up-to-date
information. Our internal temperature chart is based on

USDA standards for meat doneness. Check it out at

www.isitdoneyet.gov

Wood Chips

For extra smoke flavor when grilling, try adding wood
chips. Soak the chips in water for approximately 30

minutes before adding to a smoke box or pan. Place smoke

box or pan on top of the cooking grate above the flame.
Turn grill on high until the wood starts to smoke. Reduce

heat to desired temperature for cooking, and place food on
cooking grate as desired. Close lid to retain more smoke.

Hardwood varieties that work particularly well with grilled
foods include Alder, Apple, Cherry, Grapevines, Hickory,
Mesquite, Oak, Rosemary and Sassafras.

Skewers
Metal skewers should be flat, with long handles. Round

skewers allow food to roll when turned, so it may not cook
as evenly. Use metal skewers when cooking meat kabobs.

Wooden skewers should be soaked in water for an hour

before use, and are best used for quick cooking foods such
as vegetables and fruits.

Souces

Sauces containing sugars and fats can cause flare-ups, and

your food may burn. In general, apply these sauces during
the final 10 minutes of cooking. Keep in mind, use of

excessive sauces or glazes will also require extra cleaning
afterwards.

Marinades and Rubs

To enhance the flavor of grilled foods, a liquid marinade or
dry rub can be used prior to cooking. Meat can be either

soaked or injected with liquid marinade up to 24 hours
prior to grilling. Dry rubs can be applied directly to the
meat immediately before grilling.

Utensils

Use tongs or a spatula to handle the food instead of a fork,
and don't turn the food too

often. Piercing the food
with a fork will release

juices that you want in
the meat, and may

cause flare-ups.

6 ° 464424312 ° 464424512

Why Clean?
We've all heard the saying 'An ounce of prevention is worth
a pound of cure'. This is great advice when it comes to

keeping your grill clean.

Routine Care
Periodic cleaning of this grill is necessary

as grill fires can occur when grease and
food debris collect in the bottom of the q

After each use, remove any remaining

food particles from the cooking grate an.
inside of the grill using a grill brush. Do

this after the grill has cooled down, yet is

still warm. It is much easier to clean fooc
particles while warmth is still present, tha
after the food particles have completely

cooled and hardened. This grill is not
designed to be 'burned off' by closing th_
lid and turning the burners on High for ar

extended time. The excessive heat
generated can cause leftover grease to

catch fire, and can cause permanent
damage to your grill.

Cooking surfaces: If a bristle brush is used to clean any of
the grill cooking surfaces, ensure no loose bristles remain on
cooking surfaces prior to grilling. It is not recommended to
clean cooking surfaces while grill is hot.

Storing Your Grill
* Clean cooking grates.
* Store grill in dry location.

" When LP cylinder is connected to grill, store outdoors in a

well ventilated space and out of reach of children.

" Cover grill if stored outdoors. Choose from a variety of

grill covers offered by manufacturer.

" Store grill indoors ONLY if LP cylinder is turned off,

disconnected, and removed from grill. Never store LP
cylinder indoors.

" When removing grill from storage, follow the 'Cleaning

the Burner Assembly' instructions in the Use and Care
section of the Use and Care Guide.

General Cleaning

Plastic parts: Wash with warm soapy water and wipe dry.
Do not use abrasive cleaners, degreasers or a concentrated
grill cleaner on plastic parts. Damage to and failure of
parts can result.

Porcelain surfaces: Because of glass-like composition, most
residue can be wiped away with baking soda/water

solution or glass cleaner. Use non-abrasive scouring powder
for stubborn stains.

Painted surfaces: Wash with mild detergent or non-abrasive
cleaner and warm water. Wipe dry with a soft non-

abrasive cloth.

Stainless steel surfaces: Stainless steel can rust under certain
conditions. This can be caused by environmental conditions
such as chlorine or salt water, or improp_

cleaning tools such as wire or steel
wool. It can also discolor due to heat,
chemicals, or grease build-up. To
maintain your grill's high quality

appearance, wash with mild detergent
and warm water, or use a stainless

steel grill cleaner. Baked-on grease
deposits may require the use of an
abrasive plastic cleaning pad. Use only

in direction of brushed finish to avoid
damage. Do not use abrasive pad on
areas with graphics.

Critters
Spiders like to make their homes in the burner tubes of

grills. These must be inspected and cleaned regularly to
ensure there are no blockages. Refer to the Use and Care

portion of this Use and Care Guide for complete
information.

464424312 ° 464424512 ° 7

f x,II _I

• NEVER store a spare LP cylinder under or near the
appliance or in an enclosed area.

• Never fill a cyllnder beyond 80°/0 full.

• if the information in the two points above is not
followed exactly, a fire causing death or serious
injury may occur.

• An overfilled or improperly stored cylinder is a
hazard due to possible gas release from the safety

relief valve. This could cause an intense fire with
risk of property damage, serious injury or death.

• if you see, smell or hear gas escaping, immediately
get away from the LPcylinder and appllance and

call your fire department.

LP Tank

* The LP Tank used with your grill must meet the following

requirements:

= Use LP Tanks only with these required measurements: ]2"

(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.)

capacity maximum.

" LP Tanks must be constructed and marked in accordance with

specifications for LP Tanks of the U.S. Department of
Transportation (DOT) or for Canada, CAN/CSA-B339, tanks,

spheres and tubes for transportation of dangerous goods.
Transport Canada (TC). See LP Tank collar for marking.

" LP Tank valve must have:

* Type 1 outlet compatible with

regulator or grill.

* Safety relief valve.
* UL listed Overfill Protection

Device (OPD). This OPD safety OPD Hand Wheel
feature is identified by a unique triangular hand wheel. Use

only LP Tanks equipped with this type of valve.

" LP Tank must be arranged for vapor withdrawal and include

collar to protect LP Tank valve. Always keep LP Tanks in

upright position during use, transit or storage.

LP Tank in upright position for vapor withdrawal

LP Tank Removal, Transport And Storage

"Turn OFF all control knobs and LP cylinder valve. Turn coupling

nut counterclockwise by hand only - do not use tools to
disconnect. Loosen cylinder screw beneath bottom shelf or

disconnect other retention means, then lift PL cylinder up and

and out of cart. Install safety cap onto LP cylinder valve.
Always use cap and strap supplied with valve.

Failure to use safety cap as directed may result in serious
personal injury and/or property damage.

LP

Safety Cap

Retainer Strap

" A disconnected LP tank in storage or being transported must

have a safety cap installed (as shown). Do not store an LP
tank in enclosed spaces such as a carport, garage, porch,
covered patio or other building. Never leave an LP tank
inside a vehicle which may become overheated by the sun.

* Do not store an LP tank in an area where children play.

8 ° 464424312 ° 464424512

LP (Liquefied Petroleum Gas)

* LP gas is nontoxic, odorless and colorless when produced. For

Your Safety, LP gas has been given an odor (similar to rotten

cabbage) so that it can be smelled.

" LP gas is highly flammable and may ignite unexpectedly when

mixed with air.

LP Tank Filling
* Use only licensed and experienced dealers.
" LP dealer must purge new tank before filling.

" Dealer should NEVER fill LP Tank more than 80% of LP Tank

volume. Volume of propane in tank will vary by temperature.

" A frosty regulator indicates gas overfill. Immediately close LP

Tank valve and call local LP gas dealer for assistance.

" Do not release liquid propane (LP) gas into the atmosphere.

This is a hazardous practice.

" To remove gas from LP Tank, contact an LP dealer or call a

local fire department for assistance. Check the telephone
directory under "Gas Companies" for nearest certified LP

dealers.

LP Tank Exchange

" Many retailers that sell grills offer you the option of

replacing your empty LP tank through an exchange service.
Use only those reputable exchange companies that inspect,

precision fill, test and certify their tanks. Exchange your

tank only for an OPD safety feature-equlpped tank as

described in the "LP Tank" section of this manual.

" Always keep new and exchanged LP tanks in upright

position during use, transit or storage.

• Leak test new and exchanged LP tanks BEFORE
connecting to grlll.

" Place dust cap on cylinder valve outlet whenever the

cylinder is not in use. Only install the type of dust cap on
the cylinder valve outlet that is provided with the cylinder
valve. Other types of caps or plugs may result in leakage

of propane.

LP Tank Leak Test
For your safety

" Leak test must be repeated each time LP tank is exchanged

or refilled.

" Do not smoke during leak test.
" Do not use an open flame to check for gas leaks.
" Grill must be leak tested outdoors in a well-ventilated area,

away from ignition sources such as gas fired or electrical

appliances. During leak test, keep grill away from open

flames or sparks.

" Use a clean paintbrush and a 50/50 mild soap and water

solution. Brush soapy solution onto areas indicated by

arrows in figure below. Leaks are indicated by growing

bubbles.

Connecting Regulator To The LP Tank

1. LP tank must be properly secured onto grill. (Refer to
assembly section.)

2. Turn all control knobs to the OFF position.

3. Turn LP tank OFF by turning OPD hand wheel clockwise to a
full stop.

4. Remove the protective cap from LP tank valve. Always use
cap and strap supplied with valve.

OPD Hand Wheel

j Type I outlet with

thread on outside

Do not insert a POL transport plug
(plastic part with external threads)

into the Type 1 tank valve outlet.
It will defeat the Safety Relief Valve

feature.

If "growing" bubbles appear do not use or move the LPtank.
Contact an LP gas supplier or your fire department!

A Do not use household cleaning agents. Damage to gas

valve/hose/regulator components can result.

5. Hold regulator and insert nipple into LP!
tank valve. Hand-tighten the coupling

nut, holding regulator in a straight line
with LP tank valve so as not to cross-

thread the connection.

464424312 ° 464424512 ° 9

Hold coupling nut and regulator
as shown for proper connection

to LP tank valve.

6. Turn the coupling nut clockwise and tighten to a full stop. The

regulator will seal on the back-check feature in the LP tank
valve, resulting in some resistance. An additional one-half to
three-quarters turn is required to complete the

connection. Tighten by hand only - do not use tools.

NOTE:

Leak Testing Valves, Hose and Regulator

1. Turn all grill control knobs to OFF.

2. Be sure regulator is tightly connected to LP tank.

.

Completely open LP tank valve by turning OPD hand wheel
counterclockwise. If you hear a rushing sound, turn gas off
immediately. There is a major leak at the connection. Correct

before proceeding by calling for replacement parts at
1-800=4-MY-HOME °.

4. Brush soapy solution onto areas where bubbles are shown in
picture below:

Never remove threaded

orifice at end of valve.

If you cannot complete the connection, disconnect regulator and
repeat steps 5 and 6. If you are still unable to complete the

connection, do not use this regulator!

®

Call 1-800-4-MY-HOME for identical replacement parts.

* Do not insert any tool or foreign objects into the valve

outlet or safety relief valve. You may damage the
valve and cause a leak. Leaking propane may result in
explosion, fire, severe personal injury, or death.

" If a leak is detected at any time, STOP and call the fire

department.

* If you cannot stop a gas leak, immediately close LP tank

valve and call LP gas supplier or your fire department!

* Never attempt to attach this grill to the self-contained LPgas

system of a camper trailer or motor home.

5. If "growing" bubbles appear, there is a leak. Close LP tank

valve immediately and retighten connections. If leaks cannot

be stopped do not try to repair. Call for replacement
parts at 1-800-4-MY-HOME. ®

6. Always close LP tank valve after performing leak test by

turning hand wheel clockwise.

" Do not use grill until leak-tested.

10 ° 464424312 ° 464424512

For Safe Use of Your Grill and to Avoid Serious

Injury:

• Do not let children operate or play near grill.

• Keep grill area clear and free from materials that burn
Do not block holes in sides or back of grill.

Check burner flames regularly.
Use grill only in well-ventilated space. NEVER use in

enclosed space such as carport, garage, porch,
covered patio, or under an overhead structure of any

kind.

Do not use charcoal or ceramic briquets in a gas grill.

(Unless briquets are supplied with your grill.)

, Do not cover grates with aluminum foil or any othe_

material. This will block burner ventilation and creat,
a potentially dangerous condition resulting in
property damage and/or personal injury.

' Use grill at least 3 ft. from any wall or surface.

Maintain 10 ft. clearance to objects that can catch fire
or sources of ignition such as pilot lights on water

heaters, live electrical appliances, etc.

Safety Tips
A Before opening LP cylinder valve, check the coupling nut for

tightness.

A When grill is not in use, turn off all control knobs and LP

cylinder valve.

A Never move grill while in operation or still hot.

A Use long-handled barbecue utensils and oven mitts to avoid

burns and splatters.

A Maximum load for sideburner and side shelf is 10 Ibs.

A The grease tray must be inserted into grill and emptied after

each use. Do not remove grease tray until grill has
completely cooled.

A Clean grill often, preferably after each cookout. If a bristle

brush is used to clean any of the grill cooking surfaces,

ensure no loose bristles remain on cooking surfaces prior to
grilling. It is not recommended to clean cooking surfaces

while grill is hot.

A If you notice grease or other hot material dripping from grill

onto valve, hose or regulator, turn off gas supply at once.
Determine the cause, correct it, then clean and inspect valve,

hose and regulator before continuing. Perform a leak test.

A Keep ventilation openings in cylinder enclosure (grill cart) free

and clear of debris.

A Do not store objects or materials inside the grill cart

enclosure that would block the flow of combustion air to the
underside of either the control panel or the firebox bowl.

A The regulator may make a humming or whistling noise during

operation. This will not affect safety or use of grill.

A If you have a grill problem see the "Troubleshooting Section".

A If the regulator frosts, turn off grill and LP cylinder valve

immediately. This indicates a problem with the cylinder and it
should not be used on any product. Return to supplier!

* Apartment Dwellers:

Check with management to learn the requirements
and fire codes for using an LPgas grill in your

apartment complex. If allowed, use outside on the
ground floor with a three (3) foot clearance from

walls or rails. Do not use on or under balconies.

" NEVER attempt to light burner with lld closed. A

buildup of non-ignlted gas inside a closed grill is
hazardous.

* Never operate grill with LP cylinder out of correct

position specified in assembly instructions,

* Always close LPcylinder valve and remove

coupling nut before moving LP cylinder from

specified operation position.

cAuT,o.

' Putting out grease fires by closing the lld is not

possible. Grllls are well ventilated for safety
reasons.

' Do not use water on a grease fire. Personal injury

may result. If a grease fire develops, turn knobs
and LP cylinder off.

' Do not leave grill unattended while preheating or

burning off food residue on HIGH. if grill has not
been regularly cleaned, a grease fire can occur
that may damage the product. Follow instructions

on General Grill Cleaning and Cleaning The Burnel

Assembly to prevent grease fires.

Ignitor Lighting the Grill

Do not lean over grill while lighting.

1. Turn OFF gas burner control valves.

2. Turn ON gas at LP cylinder.

3. Open lld during lighting.

4. To ignite, push and turn the IGNITION BURNER knob to HI.

5. Push and hold ELECTRONIC IGNITION button until the
IGNITION BURNER lights.

6. If ignition does NOT occur in 5 seconds, turn the burner
controls OFF, wait 5 minutes and repeat the lighting

procedure.

7. To ignite remaining burners, turn each burner knob in
sequence to the HI position, starting with the burner closest

closest to the IGNITION BURNER.

464424312 ° 464424512 ° 11

Ignitor Lighting (continued)

8. Once each burner has ignited, turn knobs to desired setting.

9. If ignitor does not work, follow match lighting instructions.

Turn controls and gas source or tank OFFwhen not
in use.

Burner Flame Check

= Remove cooking grates and Heat Diffusers. Light burners, rotate

knobs from HI to LOW. You should see a smaller flame in
LOW position than seen on Hk Perform burner flame check

on sideburner, also. Always check flame prior to each use. If
only low flame is seen refer to "Sudden drop or low flame" in

the Troubleshooting Section.

_W

CAUTIo.

If ignition does NOToccur in 5seconds, turn the
burner controls OFF,wait 5 minutes and repeat the
lighting procedure. If the burner does not ignitewith

the valve open, gas will continue to flow out ofthe
burner and could accidently ignite with risk of injury.

Match-Lighting
Do not lean over grill while lighting.

1. Open lld. Turn ON gas at LP cylinder.

2. Place match into match holder (hanging from side panel of
grill). Light match; then light burner by placing match through

the match light hole on right or left side of grill.

3. Push in and turn far right or far left burner knob to the Hi

position, depending on match light hole selected. Be sure
burner lights and stays lit.

4. Light adjacent burners in sequence by pushing knobs in and

turning to the HI position.

Sideburner Ignitor Lighting

Do not lean over grlll while lighting.

1. Open sideburner lld. Turn ON gas at LP cylinder.

2. Turn sideburner knob to the HI position, push and hold

ELECTRONIC iGNiTiON button.

3. If sideburner does NOT light within 5 seconds, turn knob to

OFF, wait 5 minutes, then
repeat lighting procedure.

Sideburner Match Lighting

1. Open sldeburner lld. Turn ON
gas at LP cylinder.

2. Place lit match near burner.

3. Turn sideburner knob to the

Hi position.
Be sure burner lights and

stays lit.

12 ° 464424312 ° 464424512

Turning Grill Off

* Turn all knobs to the OFF position. Turn LP cylinder OFF by

turning hand-wheel clockwise to a full stop.

Ignitor Check

* Turn gas off at LP cylinder. Press and hold electronic ignitor

button. A "Click" should be heard and spark seen each time
between each collector box or burner and electrode. See

"Troubleshooting" if no click or spark.

Valve Check
* Important: Make sure gas is off at LP cylinder before

checking valves. Knobs lock in OFF position. To check
valves, first push in knobs and release, knobs should spring

back. If knobs do not spring back, replace valve assembly
before using grill. Turn knobs to LOW position then turn back to

OFF position. Valves should turn smoothly.

Hose Check
" Before each use, check to see if hoses are cut or worn.

Replace damaged hoses before using grill. Use only

identical replacement part valve/hose/regulator as
specified in the Parts List of this Use and Care Guide.

General Grill Cleaning
* Do not mistake brown or black accumulation of grease and

smoke for paint. Interiors of gas grills are not painted at the
factory (and should never be painted). Apply a strong solution

of detergent and water or use a grill cleaner with scrub brush
on insides of grill lid and bottom. Rinse and allow to completely

air dry. Do not apply a caustic grill/oven cleaner to painted

surfaces.

" Plastic parts: Wash with warm soapy water and wipe dry.

Do not use citrisol, abrasive cleaners, degreasers or a
concentrated grill cleaner on plastic parts. Damage to and
failure of parts can result.

* Porcelain surfaces: Because of glass-like composition, most

residue can be wiped away with baking soda/water solution or
specially formulated cleaner. Use nonabrasive scouring powder

for stubborn stains.

* Painted surfaces: Wash with mild detergent or nonabrasive

cleaner and warm soapy water. Wipe dry with a soft
nonabrasive cloth.

* Stainless steel surfaces: To maintain your grill's high quality

appearance, wash with mild detergent and warm soapy water
and wipe dry with a soft cloth after each use. Baked-on grease

deposits may require the use of an abrasive plastic cleaning
pad. Use only in direction of brushed finish to avoid damage.

Do not use abrasive pad on areas with graphics.

" Cooking surfaces: If a bristle brush is used to clean any of

the grill cooking surfaces, ensure no loose bristles remain on
cooking surfaces prior to grilling. It is not recommended to

clean cooking surfaces while grill is hot.

CAUTION

3. Remove carryover tubes and burners.

4. Detach electrode from burner.

f

SPIDER ALERT!

Important: Always ensure that the venturi burner tubes are clean. A

venturi burner tube has a narrow area in which spiders tend to build

nests.

if you notice that your grill is getting hard to light or that the

flame isn't as strong as it should be, take the time to check and

clean the burner tubes.

CONTROL PANEL iNSiDE VENTURI TUBE

Spiders or small insects have been known to create "flashback"
problems. The spiders spin webs, build nests and lay eggs in the
grill's venturi tube(s) obstructing the flow of gas to the burner.
The backed-up gas can ignite in the burner tube behind the
control panel. This is known as a flashback and it can damage
your grill and even cause injury.

To prevent flashbacks and ensure good performance the burner
and venturi tube assembly should be removed from the grill
and cleaned before use whenever the grill has been idle for an

SPIDER WEBS

NOTE: Removal/Detachment method will depend on the
burner configuration. See different configurations in

illustrations below.

.

Carefully lift each burner up and away from valve openings.

We suggest three ways to clean the burner tubes. Use the one
easiest for you.

(A) Bend a stiff wire (a light weight coat hanger works well)

into a small hook. Run the hook through each burner
tube several times.

(B) Use a narrow bottle brush with a flexible handle (do not

use a brass wire brush), run the brush through each
burner tube several times.

(C) Wear eye protection: Use an air hose to force air into

the burner tube and out the burner ports. Check each
port to make sure air comes out each hole.

6. Wire brush entire outer surface of burner to remove food
residue and dirt.

7. Clean any blocked ports with a stiff wire such as an open
paper clip.

8. Check burner for damage, due to normal wear and corrosion
some holes may become enlarged. If any large cracks or
holes are found replace burner.

VERY iMPORTANT: Burner tubes must reengage valve

openings. See illustration at right. Correct

9. Attach electrode to burner, burner-to-valve

10. Carefully replace burners, engagemel

11. Attach burners to brackets on firebox.

12. Reposition carryover tubes and attach
to burners. Replace heat diffusers and

cooking grates.

Storing Your Grill

" Clean cooking grates.
" Store in dry location.

" When LP cylinder is connected to grill, store outdoors in a

well ventilated space and out of reach of children.

" Cover grill if stored outdoors. Choose from a variety of grill

covers offered by manufacturers.

" Store grill indoors ONLY if LP cylinder is turned off and

disconnected, removed from grill and stored outdoors.

" When removing grill from storage, follow "Cleaning the

Burner Assembly" instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of
burner assembly or if you have trouble igniting grill.

1. Turn gas OFF at control knobs and LP cylinder.

2. Remove cooking grates and heat diffusers.

burner Electrode

bracket

a fiat blade
screwd river

464424312 ° 464424512 ° 13

1 1 LEFTFRONT LEG SH101002725 33

2 1 LEFTREAR LEG SH101002726
3 2 LEG EXTENDER 302470076
4 1 RIGHT FRONT LEG SH101002723

5 1 RIGHT REAR LEG SH101002724
6 1 MATCH HOLDER SH101002728

7 1 BOTTOM SHELF SH101002720 40

8 2 WH EEL 302450005 41
9 1 AXLE ROD 302460003 42

10 2 WHEEL SPACER 302470077 43

11 2 SIDE BRACE, F/CART SH101002722 44
12 2 FRONT PANEL 204060004 45

13 1 TANK EXCLUSION 302470136 46

14 1 GRILL LID SH101002701

15 1 BEZEL,F/ TEMPERATURE 201150002 48

16 1 TEMPERATURE GAUGE SH302020010
17 1 HANDLE, F/ LID SH101002703

18 2 HANDLE END, F/ LID 201090001 ...

19 4 LID BUMPER 302060001

20 1 TOP LID HARDWARE SH101002704

21 1 FIREBOX, GRILL BOTTOM SH101002705

22 4 MAIN BURNER 302120027
23 1 ELECTRODE, MAIN BURNER SH101002706

24 1 BURNER CARRY OVER TUBE SH101002707

25 1 BRACKET, F/CONTROL SH101002708

26 1 BRACKET, F/CONTROL SH101002709

27 1 CONTROL PANEL, MAIN SH101002710

28 1 ELECTRONIC IGNITION 302260011

29 1 BUTTON, F/ IGNITION 302260011-1

30 1 HOSE VALVE REGULATOR SH101002727

31 5 BEZEL F/CONTROL KNOB 302240001

32 5 CONTROL KNOB 302230015-3

GAUGE

HANDLE ...

PANEL, LEFT

PANEL, RIGHT

MODULE

MODULE

ASSEMBLY

If you are missing hardware or have damaged
parts after unpacking grill, call 1-800-241-7548

for replacement.
To order replacement parts after using grill,

call 1-800-4-MY-HOME. °

1 LEFT FASCIA SH101002718

34

35
36

37

38
39

47

1 LEFT SIDE SHELF SH101002717
1 RIGHT FASCIA SH101002716

1 RIGHT SIDE SHELF SH101002712
1 DRIP PAN, F/SB SH101002729

1 SIDE BURNER LID SH101002715
1 ELECTRODE, F/SB SH101002714

1 SIDEBURNER 302140010
1 SIDEBURNER GRATE 302080010

1 GREASE TRAY SH101002711
1 HEAT SHIELD, F/TANK SH101002719

1 GREASE PAN 202140010

4 HEAT DIFFUSER 202150009

2 COOKING GRATE 302110024

1 WARMING RACK 302070017
1 WING SCREW TANK SH101002721

Not Pictured

1 HARDWARE PACK 505000026
1 ASSEMBLY MANUAL, ENGLISH/ 307010085

SPANISH

14 "464424312 " 464424512

@

© ®

\ I®

®

@

®

\

®

%

@

464424312 " 464424512 " 15

D Bottom Shelf and Legs

[] Attach legs to bottom shelf with 1/4-20x2-3/8" machine screws. Be sure that metal tabs on legs

face to cart interior as shown.

Left Rear Leg

Left Front Leg

Right legs are shorter and have

wheel axle holes at base.

\

Right Rear Leg

/

Metal Tabs

Metal Tabs_

Right Front Leg

\

Bottom Shelf

1/4-20x2-3/8"

Machine Screws

Qty. 8

D Wheels and Leg Extenders

Hitch Pin

[] Turn cart upside down.
[] Slide leg extenders onto left legs as shown.
[] From front side of cart, insert axle rod through wheel, wheel spacer, right legs, another wheel

spacer and wheel. Secure with one axle washer and hitch pin. Be sure that cone side of each
wheel is against leg.

Leg Extenders

Qty. 1

0

Axle Washer

Qty. 1

Hitch Pin

Wheel Axle Rod

[_ Wheel Spacer_ 'x_

"Cone" side of wheel against leg

16 " 464424312 " 464424512

Axle Washer

Side Braces

[] Turn cart upright.
[] Attach side braces to legs using four 1/4-20xl/2" machine screws on each side. Make sure that

flat side of brace faces to cart interior. Orient side braces so that the threaded inserts are at the

top.

_',....

Side Brace

Side Bra_ce

D Front Panels

[] Fit one front panel between front legs and attach with two #8-32x3/8"machine screws each side.

Then attach the front panel to bottom shelf with two #8-32x3/8"machine screws.

[] Fit the other front panel between front legs and attach with two #8-32x3/8"machine screws each

side. Then use one #8-32x3/8"machine screw and Keps Nut to secure two front panels in the

middle hole as shown.

1/4-20xl/2"

Machine Screws

Qty. 8

#8-32x3/8"

Machine Screws

Front Panels

#8-32x3/8"

Machine Screws

Qty. 11

#8 -32

Keps Nut

Qty. 1

Bottom Shelf

464424312"464424512"17