Kenmore 41724182300, 41764182300, 41774182300 Installation Guide

Meter Case Installation Hardware Contents: Tools Required:

3/8 x 16 lock nut (1) 9/16 socket and drive

Installation Instructions:

1. Remove meter case access door.

2. InstaII 3/8 lock nut onto security bolt and tighten securely.

3. InstaII meter case access door.

INSTRUCTIONS TO CHANGE THE NUMBER OF COIN SLIDE INSERTIONS TO START APPLIANCE,

/ >

1. Disconr_ect power from machine,

2. ]urn Shaft & Cam Assembly in a clockwise direction until switch lever arm drops into cam notch

3. Lift Adjusting -Iab away from cam with finger and turn -tab to desired number. Make sure Tab\

4. ]urn Shaft & Cam Assembly in a clockwise direction until switch lever arm is on top of ]ab to

5. Reconnect power to machine,

-,--CAM NOTCH

\ _ TAB

\ \

(Fig. 2),

locks into place in new position,

assure that both mechanism switches are open (Fig, 3)

AD0UST: NT

-- OSE FINGER TO LIFT

TAB

FIGURE 2

I CLOCKWISE

DIRECTION

FIGURE 3

P/N 134411800 (0403)