Kenmore 12233492411 Owner’s Manual

Use & Care Guide Manual de Uso y Cuidado

English/Español

Kenmore®

Liquid Propane Gas Grill

Parrilla a gas de propane liquido

Model/Modelo: 122.33492411-Stainless Steel/ Acero Inoxidoble Item/Artículo: 640-05861277-1-Stainless Steel/ Acero Inoxidoble

P/N 19000617A0 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com www.kmart.com

Table of Contents

Warranty-----------------------------------------------Safety Precautions-------------------------------Hardware Contents---------------------------------Package Parts List----------------------------Assembly Instructions--------------------------Lighting Instructions---------------------------Cooking Instruction---------------------------------Cooking Chart----------------------------------------Cleaning and Maintenance--------------------------

Troubleshooting--------------------------------------

Parts Diagram --------------------------------------Parts List-----------------------------------------------

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known

to the State of California to cause cancer. WARNING: This product contains one or more chemicals known

to the State of California to cause birth defects or other reproductive harm.

Wash hands after handling.

3 4 7 8 11 30 32 33 34 35

Installer please leave the instruction with the consumer; Please retain the instruction manual for future reference.

Repair Protection Agreements

Congratulations on making a smart purchase. Your new Kenmore product is designed and manufactured for years of

dependable operation. But like all products, it may require

repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation.

Here’s what the Repair Protection Agreement * includes:

 Expert service by our 10,000 professional repair specialists  Unlimited service and no charge for parts and labor on all

covered repairs

 Product replacement up to $1500 if your covered product can’t

be fixed

 Discount of 25% from regular price of service and related

installed parts not covered by the agreement; also, 25% off

regular price of preventive maintenance check  Fast help by phone - we call it Rapid Resolution - phone support from a Sears representative. Think of us as a “talking owner’s manual”

Once you purchase the Repair Protection Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online. The Repair Protection Agreement is a risk-free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Repair Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-488-1222

*Coverage in Canada varies on some items. For Full details call Sears Canada at 1-800-469-4663

Warranty

KENMORE LIMITED WARRANTY WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed, operated and maintained according to all supplied instructions. FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship. A defective appliance will receive free repair or replacement at option of seller.

FOR TEN YEARS from the date of sale, any stainless steel burner that rusts through or burns through will be replaced free of charge. If rust through or burn through occurs within the first year, a new burner will be installed at no charge. If rust through or burn through occurs after the first year, a new burner will be supplied but not installed at no charge. You are responsible for the labor cost of burner installation after the first year from the date of sale.

For warranty coverage details to obtain free repair or replacement, visit the web page:

www.kenmore.com/warranty All warranty coverage excludes ignitor batteries and grill part paint loss, discoloration or surface rusting, which are

either expendable parts that can wear out from normal use within the warranty period, or are conditions that can be the result of normal use, accident or improper maintenance.

All warranty coverage is void if this appliance is ever used for other than private household purposes. This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1.Expendable items that can wear out from normal use within the warranty period, including but not limited to batteries, screw-in base light bulbs and surface coatings or finishes.

2.A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation,

operation and maintenance.

3.Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.

4.Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents, including installation that was not in accord with electrical, gas or plumbing codes.

5.Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and maintained according to all supplied instructions.

6.Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration, abuse, misuse or use for other than its intended purpose.

7.Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents,

cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.

8.Damage to or failure of this appliance resulting from natural or other catastrophe, such as flood, fire or storm.

9.Damage to or failure of parts or systems resulting from unauthorized modifications made to this appliance.

10.Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the appropriate certification logo.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement as

provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year on the appliance and ten years on the burners, or the shortest period allowed by law. Seller shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state

to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

Precautions

WARNING

Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death, or property damage.

WARNING

Your grill will get very hot. Never lean over the cooking area while using your grill. Do not touch cooking surfaces, grill housing, lid or any other grill parts while the grill is in operation, or until the gas grill has cooled down after use.

Failure to comply with these instructions may

result in serious bodily injury.

WARNING

1. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.

2. An LP cylinder not connected for use

shall not be stored in the vicinity of this

or any other appliance.

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

Grill Installation Codes

The installation must conform with local codes or, in the absence of local codes, with either the national fuel gas code, ANSI Z 223.1/NFPA 54, Natural gas and propane installation code, CSA B149.1, or propane storage and

handling code, B149.2, or the standard for Recreational

vehicles, ANSI A 119.2, and CSA Z240 RV series recreational vehicle code, as applicable. LP gas grill models are designed for use with a standard 20 lb. Liquid Propane Gas tank, not included with grill. Never connect your gas grill to an LP gas tank that exceeds this capacity.

A tank of approximately 12 inches in diameter by 18-1/2 inches high is the maximum size LP gas tank to use.

You must use an OPD gas tank which offers an Overfill

Prevention Device.

This safety feature prevents the tank from being overfilled which can cause malfunction of the LP gas tank, pressure regulator and/or grill.

The LP gas tank must be constructed and marked in accordance with specifications of the U.S. Dept. of Transportation (DOT). In Canada, the LP gas tank must meet the National Standard of Canada ,CAN/CSA-B339 , Cylinders ,

spheres and Tubes for Transportation of Dangerous Goods

and Commission .

1. The LP gas tank must have a shutoff valve, terminating in an LP gas supply tank valve outlet, that is compatible with a Type 1 tank connection device. The LP gas tank must also have a safety relief device that has a direct connection with the vapor space of the tank.

2. The tank supply system must be arranged for vapor withdraw.

3. The LP gas tank used must have a collar to protect the tank valve.

Proper Placement and Clearance of Grill

Never use your gas grill in a garage, porch, shed, breezeway

or any other enclosed area. Your gas grill is to be used outdoors only, at least 36 inches from the back and side of any combustible surface. Your gas grill should not be used under overhead combustible construction . Do not obstruct the flow of ventilation air around the gas grill housing.

• Do not install this outdoor gas grill in or on recreational vehicles or boats

• Keep outdoor gas grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids

• Do not obstruct the flow of combustion and ventilation air. Check for this each time prior to using grill.

• Never connect an unregulated LP gas tank to your gas grill. The gas pressure regulator assembly supplied with your gas

grill is adjusted to have an outlet pressure of 11” water column

(W.C.) for connection to an LP gas tank.

• Only use the pressure regulator and the hose assembly

supplied with your gas grill. Replacement pressure regulators

and hose assemblies must be those specified in this manual.

• Have your LP gas tank filled by a reputable propane gas dealer and visually inspected and re-qualified at each filling.

• Do not store a spare LP gas tank under or near this appliance.

• Never fill the tank beyond 80 percent full . If this

information is not followed exactly a fire causing death

or serious injury may occur.

• Always keep LP gas tanks in an upright position.

• Do not store or use gasoline or other flammable vapors

and liquids in the vicinity of this gas grill.

• Do not subject the LP gas tank to excessive heat.

• Never store an LP gas tank indoors. If you store your

gas grill in the garage or other indoor location, always disconnect the LP gas tank first and store it safely outside.

• Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

• LP gas tanks must be stored outdoors in a wellventilated area and out of reach of children. Disconnected LP gas tanks must not be stored in a building, garage or any other enclosed area.

• When your gas grill is not in use the gas must be turned off at the LP gas tank.

• The pressure regulator and hose assembly must be inspected before each use of the grill. If there is

excessive abrasion or wear or if the hose is cut, it must

be replaced prior to the grill being used again.

• Keep the gas pressure regulator hose away from hot grill surfaces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect the hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call 1-844-553-6667 for a replacement hose.

• Never light your gas grill with the lid closed or before checking to ensure the burner tubes are fully seated

over the gas valve orifices.

• Never allow children to operate your grill.

Always keep the LP cylinder at 90° (upright) orientation to provide vapor withdraw.

WARNING

A strong gas smell, or the hissing sound of gas indicates a serious problem with your gas grill or the LP gas tank. Failure to immediately follow the steps listed below could result in a fire or explosion that could cause serious bodily injury, death, or property damage.

• Shut off gas supply to the gas grill.

• Turn the control knobs to OFF position.

• Put out any flame with a proper fire extinguisher.

• Open Grill Lid.

• Get away from the LP gas tank.

• Do not try to fix the problem yourself.

• If odor continues or you have a fire you can not

extinguish, call your fire department. Do not call near the LP gas tank because your telephone is a form of electrical device and could create a spark resulting in fire and/or explosion.

NOTE: The normal flow of gas through the pressure regulator and hose assembly can create a humming

noise. A low volume of noise is perfectly normal and

will not interfere with operation of the grill. If humming noise is loud and excessive you may need to purge air from the gas line or reset the pressure regulator excess gas flow device. This purging procedure should be done every time a new LP gas tank is connected to your grill. For help with this procedure refer to page 31, Item 4 of “If Grill Still Fails To Light”.

CAUTION: Beware of Flash-Back Burner Flame Check

CAUTION: Spiders and small insects occasionally spin webs or make nests in the grill burner tubes during transit and warehousing. These webs can lead to gas flow obstruction which could result in a fire in and around burner tubes. This type of fire is known as “FLASH-BACK” and can

cause serious damage to your grill and create an unsafe

operating condition for the user.

Although an obstructed burner tube is not the only cause of

“FLASH-BACK”, it is the most common cause.

To reduce the chance of “FLASH-BACK”, you must clean

the burner tubes before assembling your grill, and at least once a month in late summer or early fall when spiders are most active. Also perform this burner tube cleaning procedure if your grill has not been used for an extended

period of time.

See Cleaning Burner Tubes and Ports on page # 36.

Visually check the burner flames prior to each use. The flames should look like picture, if they do not, refer to the cleaning burner tubes and ports, see page 36 of this manual.

Checking for LP gas leaks

Never test for leaks with a flame. Prior to first use, at the beginning of each season, or every time your LP gas tank is changed, you must check for gas leaks.

1. Make a 50/50 (soap/water) mild soap solution.

2. Turn the control knobs to full OFF position; then turn gas ON at

supply tank.

3. Apply the soap solution with a clean brush to all gas connections. See below. If growing bubbles appear in the solution the connections are not properly sealed. Check each fitting and tighten or repair as necessary.

4. If you have a gas connection leak you cannot repair, turn gas OFF at supply tank, disconnect fuel line from your grill and call 1-844-553-6667 or your gas supplier for repair assistance.

5. Also apply soapy solution to the tank seams. See below. If growing bubbles appear, shut tank OFF and do not use or move it! Contact an LP gas supplier or your fire department for assistance.

Gas Connection Leak Check

Gas Tank Leak Check

Tools Needed / Herramientas necesarias

Hardware package list/ Lista de tornillos del paquete

Truss head screw with locking washer 1/4-20x 5/8 " Tornillo de cabeza ovalada 1/4-20x 5/8 "

A x18 B

Some parts come with Screws preinstalled. Loosen and tighten for final assembly.

Truss Head Screw 1/4-20x 5/8 " Tornillos de cabeza reforzada con la arandela 1/4-20x 5/8 "

X21

Algunas partes vienen con los tornillos pre instalados. Afloje y apriete para el ensamble final.

Truss Head Screw 1/4-20x 5/16 " Tornillos de cabeza reforzada con la arandela 1/4-20x 5/16 "

C x2

Flat Head Screw 5/32-32 x 3/8 " Tornillo de cabeza plana 5/3232 x 3/8 "

D x6

Flat Washer 1/4"

Arandela plana 1/4"

x20

Flat Washer 5/32"

Arandela plana 5/32"

F x4

Package parts List

Lista de contenido del paquete

3 4

Tank Bolt Tornillo para la bandeja del tanque

Bottom Panel Trim Piece Moldura del panel inferior

5 6

Side Panel, left Panel lateral izquierdo

Bottom panel Panel inferior

Back Panel

Estante del mechero lateral

Side Panel, right Panel lateral derecho

Triangle Bracket,right

Abrazadera triangular, derecha

9 10

Cart Beam Armazón del carro

Triangle Bracket,left

Abrazador triangular, izquierda

Door Handle

Mango de la puerta

Package parts List

Lista de contenido del paquete

Door,left

11 12

Puerta, lado izquierdo

Grease Tray Bandeja para grasa

Grease tray bracket Recipiente para grasa abrazadera-

Door, right Puerta, lado derecho

Grease cup baffle Listón de barrera diagonal

Main lid handle Mango de la tapa principal

17 18

19 20

Handle bezel Asiento del mango

Side shelf Estante lateral

Grease cup Recipiente para grasa

Sear burner with side shelf front panel Mechero de marcado con estante lateral del panel delantero

Package parts List

Lista de contenido del paquete

25 26

Warming Rack Rejilla de calentamiento

Cooking Grids Rejilla de cocción con agujero

Grill Head Cabezal de la parrilla

Control Knob Perlilla de control

Sear Burner Grease Tray Bandeja para grasa del mechero de marcado

Flame Tamer Domador de llamas

27 28

Stationary casters with brake

Rueda estacionario

Sear Burner Cooking Grid Parrilla del mechero de marcado

Stationary Casters Rueda estacionario con freno

Battery Batería

If you are missing hardware or have damaged parts after unpacking grill, call 1-800-913-8999 for replacement. To order

replacement parts after using grill, call 1-844-553-6667.

Si le falta hardware o ha dañado partes después de desembalar la parrilla, llame al 1-800-913-8999 para repuesto. Para ordenar partes de repuesto después de usar la parrilla, llame al 1-844553-6667.

Screw the tank bolt to bottom panel by turning to the right. Atornillar el tornillo del tanque al panel inferior girando a la derecha.

Loosen but do not remove the five screws on the bottom panel trim piece. Slide the trim panel screw heads up into the keyhole slots in the bottom panel and tighten the screws.

Afloje pero no retire los cinco tornillos en la pieza de adorno de panel de fondo. Deslice la cabeza del tornillo panel de tapizado para arriba en las ranuras en el panel inferior y apriete los tornillos.

x16

Attach each of the four casters to bottom panel using (4) 1/2-20x5/8" screws with locking washers (A) and (4) 1/4" flat washers (E).

Hint: For ease of caster assembly, turn bottom panel upside down. Attach the two casters with brakes to the rear side of the panel, opposite to the panel trim piece.

Coloque cada una de las cuatro ruedas al panel inferior con tornillos de 1/2-20 x 5/8"(4) con la fijación de las arandelas (A) y (4) 1/4 plana (E).

Sugerencia: Para facilitar el ensamble de las ruedas, ponga el panel inferior boca abajo. Fije las dos ruedas con frenos al lado trasero del panel, del lado opuesto al de la moldura.

Loosen but do not remove the three screws that are pre-assembled on left side bottom panel. Slide slots in bottom of left side panel beneath the protruding screw heads of bottom panel as shown below, and then tighten screws.

Afloje pero no retire los tres tornillos que están premontados en el lado izquierdo del panel inferior. Deslice las ranuras de la parte inferior del panel de la izquierda debajo de la cabeza del tornillo que sobresale del panel inferior como se muestra abajo y luego apriete los tornillos.

Loosen but do not remove the three screws that are pre-assembled on right side bottom panel. Slide slots in bottom of right side panel beneath the protruding screw heads of bottom panel as shown below, and then tighten screws.

Afloje pero no retire los tres tornillos que están premontados en el panel inferior del lado derecho. Deslice las ranuras de la parte inferior del panel del lado derecho debajo de la cabeza del tornillo que sobresale del panel inferior como se muestra abajo y luego apriete los tornillos.

Attach back panel bottom edge to bottom panel using three Truss Head Screws 1/4-20x5/8" (B). Loosen the two preassembled screws on each side panel. Slide the two slots on each side edge of back panel beneath the protruding side panel screw heads as shown below, and then tighten the screws.

Fije el borde inferior de la trasera al panel inferior utilizando tres tornillos de cabeza segmental 1/4-20 x 5/8"(B). Afloje los dos tornillos preensamblados en cada panel lateral. Deslice los dos ranuras en cada borde lateral de panel debajo de la cabeza del tornillo que sobresale lado panel posterior como se muestra abajo y luego apriete los tornillos.

Bx3

Loosen but do not remove the four screws on the left side panel and bottom panel. Slide the four slots in the bracket under the four screw heads and tighten the screws.

Afloje sin retirar los cuatro tornillos del panel izquierdo y del inferior. Deslice las cuatro ranuras en la abrazadera

abajo de la cabeza de los cuatro tornillos y apriete los tornillos.

Loosen but do not remove the four screws on the right side panel and bottom panel. Slide the four slots in the bracket under the four screw heads and tighten the screws.

Afloje sin retirar los cuatro tornillos del panel derecho y del inferior. Deslice las cuatro ranuras en la abrazadera abajo de la cabeza de los cuatro tornillos y apriete los tornillos.

Use four Truss Head Screws 1/4-20x 5/8 " (B) to attach the cart beam to the right and left side panels.

Utilice cuatro tornillos (B) de Truss Head Screw 1/4-20x 5/8 " para conectar el bastidor del carro a los paneles laterales derecho e izquierdo.

With the aid of an assistant, carefully place the grill head onto the grill cart.

Con la ayuda de un asistente coloque cuidadosamente el cabezal en el carro del asador.

Attach grill head to left and right side panels using two Truss Head Screws 1/4-20x 5/8 " (B) for each side.

Fije el cabezal en los paneles izquierdo y derecho con dos tornillos de Truss Head Screw 1/4-20x 5/8 " (B) en cada lado

Attach a door handle to left door using two Truss Head Screws 1/4-20x 5/8 " (B). Be careful not to drop screws into door interior when attaching handles.

Fije la manija de una puerta a cada puerta usando dos tornillos 1/4-20 x 5/8"(B). Tenga cuidado de no soltar tornillos en el interior de la puerta cuando maneja.

+ 36 hidden pages