Kenmore 11097469800, 11097469100, 11096469800, 11096469100 Owner’s Manual

I m

13rlDRYEROPE.ATING,NSTRUCTIONS

END-OF-CYCLE

SIGNALFEATURE

CYCLE SELECTOR

CI_TROL

OPERATINGSTATUS
SYMBOLS

I UNTSCREEN

B ERFORMANCE

GUIDE LABEL

_1 MODEL NO, PLATE

I
i

m m

If you need SERVICE or PARTS for your Kenmore dryer:

Be ready to give your Sears Service Department the model number, serial number and date of
purchase. Write in below. The plate [] with model and serial numbers is located behind the

dryer door.

1,0. IM I

_ MODEL NO. SERIAL NO. DATE OF PURCHASE

i i

ELECTRIC

MODEL 64691

GAS

MODEL 74691

How to dry a load of laundry

_ Clean lint screen before each load. (_ SetCycleSelectorControll!

_'I Put laundryinto dryerand shut [-_ Push the Start Control Ill to start

the door. _ your dryer.

J OUl"f _ 14L(IT

Ill Cycle Selector Control

Use this control to select the properdrying method forthetype of
items in the load. The control can be set for Automatic or Timed

Drying, Touch Up or Air. You can turnthe control at any time to
make drying time longer or shorteror you can turnthe control to

an OFF position to shut the dryeroff.

OPERATING STATUS SYMBOLS
Color coordinated keys indicate in which portion of the cycle the

dryer is operating.

E1 Start Control

Use this control to start the dryer after cycle is selected. Be sure
the door is closed.

Opening the door stops the dryer. It will not start again until you
close the door and push the START control. Be sure the Cycle
Selector Control is on a dry setting.

-_ Remove load when dry.

!!

man

tri'_Llrf

El End-of-Cycle Signal

This signal buzzes to tell you the drying cycle is over. The dryer
should be unloaded as soon as the cycle is over to get the best

wrinkle free results.

During Wrinkle Guard Ithe buzzer will sound every 5 minutes.

Part No. 3392339