Kenmore 110.6704 Series, 110.6707 Series, 110.6703 Series, 110.6705 Series, 110.6706 Series Quick Start Manual

Oasis

We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer. This

information covers several different models. Your dryer may vary from the model shown and may not have all the cycles and features described. Consult the
Use and Care Guide for more detailed instructions. To contact Sears Service, call 1-800-4-1VlY-HOME®(1-800469-4663).

S

STATUS

Wet

_aml

C_ollo_m

ClothesDry

WfirlkleGuard

C_eek[intScmen O

MODIFIERS OPTIONS _'_

M0 Hgh Dr_m Light

Mediur,-

FIgh

Damp Dry Si£nal

Normal Low Wrinkle Guard 150

E×trabw

less Air t_/

Dryness Temperature

Level ,,_,,t_l_,l,,_,c_s

Soft

Cycle Signal Volume

Models/Modelos 110.67035% 67045% 67055% 67065% 67075, 67085, 67095, 77035% 77045% 77055% 77065, 77075, 77085, 77095-

Explosion Hazard

Keep flammable materials and vapors, such as
gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in
death, explosion, or fire.

1. Clean the lint screen.

2. Place laundry in dryer.

3. Shut the door.

4. Press POWER.

5. Select Auto Dry Cycle,
* Turn cycle knob to recommended Auto Dry Cycle for type

of Ioadbeing dried.
* If desired, adjust the Dryness Level.
* Temperatures cannot be adjusted on Auto Dry Cycles.

or select Timed Cycle.

* Turn cycle knob to Timed Dry.
* Select drying time using More Time or Less Time buttons.

, Select temperature setting using Temperature button.

6. Select OPTIONS.
* To be alerted when cycle is complete, select the

Cycle Signal.

* During Auto Dry Cycles, to be alerted when clothes are

still damp, select the Damp Dry Signal.

* To help keep wrinkles from forming after drying is

complete, select Wrinkle Guard ®.

7. Press and hold the START button.

8576671

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in

death or fire.

This feature is a reminder to check whether the lint

screen needs to be cleaned. The Check Lint Screen light

will come on when the machine is turned on. The light will

flash until the cycle is started or the door is opened.

J

£1'l'ISIIil £I TIII£ l£1IIllllI

A preset time is displayed when an Auto Dry Cycle is

selected. During the first few minutes of the drying

process, the cycle time may automatically vary from the

preset time based on the size and fabric type of the load.

Toward the end of the drying process, the estimated time
display will adjust again, showing the final drying time. For

Timed Cycles, this time will count down from the start of the
cycle.

Continued on back

Auto Dry Cycles

Auto Dry Cycles may be used for most loads. These cycles

give the optimal drying in the shortest time. Drying time varies
according to the type of fabric, size of the load, and dryness
setting.

Auto Dry Cycles
All Auto Dry Cycles are preset to the Normal Dryness Level,

which is good for most fabrics. At the end of the cycle, you

may check the dryness of the load.

,, If the load is drier than you like, you may select the Less

Dryness Level the next time you dry a similar load.

,*If the load is not as dry as you like, you may select the More

Dryness Level the next time you dry a smiliar load. You may
complete drying using a Timed Cycle.

AUTO PRESET CYCLE SETrINGS

AUTO DRY CYCLES TIME*

TEMPERATURE

LOAD TYPE (Minutes)
HEAVY DUTY High 50

Heavyweight mixed loads,
cottons, jeans

COTTON/TOWELS High 45

Towels, sheets, cottons

NORMAL Medium 40
Corduroys, work clothes

Auto Moisture Sensing

Dryness is determined by an electronic sensor that "senses" the
amount of moisture in clothes as they pass over it. When the
dryness selected is reached, the dryer goes into a cool down period
of up to 10 minutes.

Timed Dry

This cycle may be used to get up to 80 - 90 minutes (depending on
the model) of heated drying time. The heating portion of the cycle is

followed by a cool down period of up to 10 minutes. Both time and
temperature levels can be adjusted.

i_x:prosS Dry TM

This cycle may be used for drying small loads that need a short

drying time. This setting provides 23 minutes of heated tumbling

with a cool down period.

Touch Up

This cycle may be used to help smooth synthetic and permanent

press clothes that are clean and dry, but wrinkled from being in
storage. This setting provides about 20 minutes of heated tumbling

followed by a cool down period of up to 10 minutes.

TIMED PRESET CYCLE SETTINGS

BULKY/BEDDING Medium 60

Jackets, comforters, cotton or

polyester fiber filled pillows
CASUAL Low 35

Business casual clothes, per-
manent press, synthetics

ULTRA DELICATE/DELICATE Extra Low 25
Lingerie, blouses, washable

knit fabrics
*Estimated Time with Auto Dry Level (Normal) setting.

Time will vary depending on load type and load size.

DEFAULT DEFAULT

TIMED CYCLES

TEMPERATURE TIME

LOAD TYPE (Minutes)

High 40

TIMED DRY

Heawweight, bulky items,
work clothes

EXPRESS DRY TM High 23

Small loads

20TOUCH UP Medium

Helps to smooth out wrinkles

%**_.

85766'71

© 2005 Sears

Options allow you to customize your cycle.

WR|HKLE GUARD ®(30, 60, 90, 150)

WRINKLE GUARD c'_helps smooth out wrinkles that may form when
clothes are not removed promptly at the end of a cycle. WRINKLE

GUARD ®periodically starts and stops the dryer, tumbling the load

without heat for 30, 60, 90 or 150 minutes (depending on your model)

unless you open the dryer door.
During WRINKLE GUARD _, the Cycle Signal will sound every

,5minutes unless the signal is turned off.

End of Cycle Signal Control

When it is selected, the Cycle Signal sounds when a cycle is
complete. On some models, the variable control lets you select a

volume of soft or loud.

Heated Dryer Rack

The dryer rack may be used to machine dry items you do not want to
tumble dry or that you would normally line dry. Items containing foam,

rubber or plastic must be dried on a clothesline or by using the Air Dry

temperature setting.

NOTE: This feature is to be used with Timed Dry Cycles only.

J

Before you call service...
check for the following.

Is the lint screen clogged with lint?
,,Clean the lint screen before each load.

Is the exhaust vent or outside exhaust hood
clogged with lint?

oLint should be cleaned out of the exhaust vent at

least once every 2 years.
Is the Auto Dry Cycle ending early?
oDo not use a dryer rack with an Auto Dry Cycle.
Are all your Auto Dry Cycle loads consistently not

as dry as you would like?

You may change the preset Dryness Level settings to

increase dryness for all Auto Dry Cycles. See

"Changing Cycles, Modifiers and Options" in the Use

and Care Guide.
See the Use and Care Guide for complete details.

Brands, LLC

® TM SM

RegisteredTrademark / Trademark/ Service Mark of Sears Brands, LLC

9/05

Printed in U.S.A