Kawasaki WORKHORSE KLF250 User Manual
Quad Link Rear Suspension
KLF250ABF
Engine Type 4-Stroke, Single Cylinder, Air-Cooled, SOHC, 2-Valve
Displacement 228.0 cm³
Bore & Stroke 69.0 x 61.0 mm
Maximum Torque 17.9 N•m / 5,500 rpm
Starting Electric with Back-up Recoil Starter
Transmission 5-Speed Semi-automatic with Reverse
Front Tyre Size Tubeless AT21 X 8-9
Rear Tyre Size Tubeless AT22 X 10-10
Wheelbase 1,115 mm
Front Brake Type 140 mm Dual Drums
Rear Brake Type 160 mm Single Drum (right side)
Front Suspension Single A-arm with twin shock absorbers
Rear Suspension Quad-Link with twin shock absorbers
Front Wheel Travel 115 mm
Rear Wheel Travel 125 mm
Fuel Tank Capacity 10.0 Litres
Towing Capacity 204 kg (Includes Trailer and Cargo)
Vehicle Load Capacity 130 kg (Includes Occupant and Cargo)
Front & Rear Rack
Max Load
Front 20 kg
Rear 30 kg
Seating Capacity 1
Curb Mass 195.0 kg
(includes full tank of fuel and all uids at correct levels)
Colour Woodsman Green
(Specications subject to change without notice.) (Images may show overseas model)
Key Features:
Gutsy 4-stroke SOHC air cooled engine
Compact Size, Easy to Operate Controls
Specications:
WORKHORSE KLF250
ENGINE
* An engine balancer reduces vibration, minimising wear, noise
and rider fatigue.
* Direct Current Capacitor Discharge Ignition (DC-CDI) with
electronic advance ensures accurate ignition timing with no
maintenance.
* Electric starter with recoil backup allows you to start the ATV
even if the battery is low.
* Manually operated compression release.
Fuel System
* Mikuni VM24SS carburettor provides excellent throttle re-
sponse, power and torque across the rpm range.
* Adjustable throttle limiter allows new users to ride at re-
duced speed and power levels.
* Conveniently located handlebar mounted choke makes
starting and warm-up easier.
* A two stage foam air lter helps to minimise wear.
Transmission
* Semi-automatic transmission. Just shift and go, no clutch
lever to pull or cable to adjust.
* A gear for every type of load or terrain.
* Indicator light shows when reverse is engaged.
Rear Shaft Drive
* A protective plate covers the drive shaft U-joint for service
durability.
* A reliable and quiet, low maintenance system.
CHASSIS
* Double cradle frame provides strength and reliability while
adding extra protection for vital engine parts.
Single A-arm Independent Front Suspension
* Single A-arm design for less unsprung weight and tighter
turning radius.
* Independent front suspension allows each wheel to track
over uneven ground for maximum traction with light steering
effort.
* Twin dampers with coil springs.
Quad-Link Semi-Independent Rear Suspension
* Multi-link, semi-independent, built to easily handle the
rigours of heavy use while providing a smooth ride.
* The only model in its class with semi-independent rear sus-
pension.
* Twin dampers with coil over springs.
Triple Drum Brakes
* Independently controlled front and rear brakes.
* Handling while braking is improved because the rider can
react to the traction of the front and rear wheels separately.
* Parking brake built into the left hand brake lever.
Transportability
* Compact enough to t in the bed of most full-sized SUV
trucks.
Detail Features
* Twin headlights light the way at night.
* Brake lights are triggered by the hand and foot brakes.
* Fuel gauge.
* Neutral and reverse indicator lamps.
* Moulded pin accessory connector.nTwo accessory leads are
built into the harness.
* Front and rear racks can carry a combined load of 50 kgs.
* Rear trailer hitch bracket is standard with a 204 kg towing
capacity.
* Key lock ignition switch prevents unauthorised operation.
New for 2011
Colour: Woodsman Green
Authentic Kawasaki Accessories
* See www.kawasaki.com.au for all of the latest
Authentic Kawasaki Accessories available for this model.
2011 WORKHORSE KLF250
Key Features:
* Air Cooled SOHC Single Cylinder Engine
* Independent Front Suspension
* Quad Link Rear Suspension
* 5-Speed Auto Clutch with Reverse
* Compact Size
Loading...