Page 1
KAT KT4 Pro Hi-Hat
Owner’s Manual
Page 2
Information For Your Safety!
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place
for future reference.
Power Supply
Please connect the designated AC
adaptor to an AC outlet of the correct
voltage.
Do not connect it to an AC outlet of
voltage other than that for which your
instrument is intended.
Unplug the AC power adaptor when not
using the instrument, or during electrical
storms.
Connections
Before connecting the instrument to other
devices, turn off the power to all units.
This will help prevent malfunction and / or
damage to other devices.
Location
Do not expose the instrument to the
following conditions to avoid deformation,
CAUTION
discoloration, or more serious damage:
·Direct sunlight
·Extreme temperature or humidity
·Excessive dusty or dirty location
·Strong vibrations or shocks
·Close to magnetic field
Interference with other electrical
devices
Radios and televisions placed nearby
may experience reception interference.
Operate this unit at a suitable distance
from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated
wiping cloths.
Handling
Do not apply excessive force to the
switches or controls.
Do not let paper, metallic particles, or
other objects into the instrument. If this
happens, remove the electric plug from
the outlet. Then have the instrument
inspected by qualified KAT service
personnel.
Disconnect all cables before moving the
The normal function of the product
may be disturbed by Strong Electro
Magnetic Interference. If so, simply
reset the product to resume normal
operation by following the owner's
manual. In case the function could
not resume, please use the product
in other location.
Page 3
Setup Guide
1. Loosen the screw #2 with a drum key.
2. Turn part 1 counterclockwise and take
off part 1, 3, 4, 5 in sequence.
Drum key
Wing Nut
Wing Nut
1
2
3
4
5
6
1
2
3
4
5
6
4. Put part 5, 4 , 3 and 1 on 6 in sequence.
5. Tighten screw 2 with drum key.
3. Insert part 6 through the center hole of
part 7.
6
7
6. Put part 8 on the stand, then put part 7
on the stand. A djust the distance to
1.5 ~ 2.0 cm and tighten the wing nut.
Wing Nut
7
1.5-2.0cm
8
Page 4
User Guide
1. Power Switch
OFF: Power off.
ON: Power on.
2. Power ON/OFF Indicator Light
Green: Power on.
4. DC IN Jack
Connect a 9-12V, DC adaptor here.
5. Power Cables
The cable conducts the power from the
adapter to the device.
3. HI-HAT CONTROL Trigger Output Jack
For connecting to the drum module via
the HI-HAT CONTROL jack.
To the Drum Module DC IN
2
OU
3
FF
O
TP
N
O
UT
1
6. HI-HAT Trigger Output Jack
For connecting to the drum module via the HI-HAT INPUT jack.
FF
O
N
O
9
12V
4
OUTPUT
5
6
Loading...