Kanomax USA, Inc.
219 US Highway 206
Andover, NJ 07821
Phone: 973-786-6386 / Fax: 973-786-7586
Web: www.kanomax-usa.com
E-mail: info@kanomax-usa.com
Kanomax Gasmaster
2710 (V1.X), & 2750 (V1.X)
User Guide
V 1.0
Kanomax Gasmaster User Guide
Table of Contents
1. Monitor Components .................................................................................................................... 4
1.1. Model 2710.............................................................................................................................. 4
1.2. Model 2750.............................................................................................................................. 4
2.
Installation ..................................................................................................................................... 5
2.1. Battery Pack ............................................................................................................................ 5
2.1.1. Installation ....................................................................................................................... 5
2.1.2. Removal .......................................................................................................................... 5
2.1.3. Charging Ni-MH Batteries ............................................................................................... 5
2.1.4. Charging Lithium Polymer Batter ies................................................................................ 6
2.1.5. Safety Information ........................................................................................................... 6
2.2. Sensor Heads.......................................................................................................................... 7
2.2.1. Sensor Warm Up ............................................................................................................. 7
2.2.2. Sensor Head Failure ....................................................................................................... 7
2.3. Optional Temperature and Relative Humidity Sensor ............................................................ 8
3.
Operation ....................................................................................................................................... 8
3.1. Model 2710 Display ................................................................................................................. 8
3.2. Model 2750 Display ................................................................................................................. 8
3.3. Powering On and Off ............................................................................................................... 9
3.4. Menu Functions ....................................................................................................................... 9
3.4.1. Units .............................................................................................................................. 10
3.4.2. Max/Min/Average Measurement Cycle ......................................................................... 10
3.4.3. Calibration ..................................................................................................................... 11
3.4.4. Mute Key ....................................................................................................................... 11
3.4.5. Location ID (Model 2750) .............................................................................................. 11
3.4.6. Monitor ID (Model 2750) ............................................................................................... 11
3.4.7. Output Sensor (Model 275 0) ......................................................................................... 12
3.4.8. Alarm Points (Model 2750) ............................................................................................ 12
3.4.9. Control Points (Model 27 50 ) ......................................................................................... 13
3.4.10. Clock Setup (Model 2750) ............................................................................................. 13
3.4.11. Logging Setup (Model 2750) ......................................................................................... 13
4.
Kanomax Gasmaster Monitor Software (Model 2750) .............................................................. 14
4.1. Set Up ................................................................................................................................... 14
4.1.1. Connect ......................................................................................................................... 15
4.1.2. Configuration ................................................................................................................. 15
4.2.
Data Logging ......................................................................................................................... 15
4.2.1. PC Data Logging ........................................................................................................... 15
4.2.2. Downloading Logged Data from Model 2750 ................................................................ 16
4.2.3. Graphs ........................................................................................................................... 16
4.2.4. Tables ............................................................................................................................ 17
4.2.5. Data Analysis ................................................................................................................ 17
4.3. Advanced Data Management................................................................................................ 18
5.
External Control Wiring (Model 2750) ....................................................................................... 18
5.1. Wiring for Alarm..................................................................................................................... 19
5.2. Wiring for Control .................................................................................................................. 19
Page | 2
Kanomax Gasmaster User Guide
MRK-D-0002 V3
5.3.
Wiring the 0-5 V Analogue Output ........................................................................................ 20
6.
Calibration of Sensor Heads ...................................................................................................... 21
6.1. Calibration Procedure ........................................................................................................... 21
6.2. Zero Calibration ..................................................................................................................... 22
6.3. Span Calibration .................................................................................................................... 22
6.3.1. Procedure ...................................................................................................................... 24
6.4. Bump Test ............................................................................................................................. 24
6.5. Health and safety during calibration ...................................................................................... 24
6.5.1. High pressure leak or failure of pressure regulator ....................................................... 25
6.5.2. Flammability of combustible gases ............................................................................... 25
6.5.3. Toxicity .......................................................................................................................... 25
7.
Specifications .............................................................................................................................. 27
7.1. Diagrams ............................................................................................................................... 28
7.2. Optional Extra: Handheld E nc losur e ..................................................................................... 29
7.2.1. Specifications ................................................................................................................ 29
7.2.2. Replacing the Sensor Head .......................................................................................... 29
7.2.3. Removing the Monitor ................................................................................................... 30
8.
Troubleshooting .......................................................................................................................... 30
8.1. Sensor Failure ....................................................................................................................... 32
8.2. Technical Support ................................................................................................................. 33
9.
Guidelines on How to Measure Ozone ..................................................................................... 34
10.
Care and Maintenance ................................................................................................................ 35
10.1. Disposal / Recycling .......................................................................................................... 35
11.
Appendix ...................................................................................................................................... 36
11.1. Copyright ........................................................................................................................... 36
11.2. Software License ............................................................................................................... 36
11.3. Terms and Conditions ....................................................................................................... 36
11.4. Statements of Compliance ................................................................................................ 36
Page | 3
Kanomax Gasmaster User Guide
MRK-D-0002 V3
1. Monitor Component s
1.1. Model 2710 Monitors
The following components are supplied with the Model 2710 Monitor:
• Monitor base
• 12 VDC AC/DC adaptor or Lithium Smart Charger
• Battery pack – 9.6V Ni-MH or 11.1V Lithium Polymer
• User manual
1.2. Model 2750 Monitor
The following components are supplied with the Model 2750 Monitor:
• Monitor base
• USB to monitor cable
• Lithium Smart Charger
• Battery pack – 11.1V Lithium Polymer
• User manual
Note 1: The data logging software for the Model 2750 can be found at:
http://www.kanomax-usa.com/iaq/gasmaster/gasmaster.html
Please check that all these components have been supplied and contact your distributor or Kanomax
at: info@kanomax-usa.com
if any of the components are missing.
Replacement batteries, sensor heads and other accessories can be purchased separately.
Page | 4
Kanomax Gasmaster User Guide
MRK-D-0002 V3
2. Installation
The following actions need to be completed before the monitor is ready for use:
• Insert the sensor head into the top of the monitor. The sensor head is keyed to ensure
the head is inserted correctly.
• The battery must be connected and charged prior to use. The battery is shipped installed
in the monitor but disconnected.
• The temperature and RH sensor needs to be inserted – optional
2.1. Battery Pack
2.1.1. Installation
1. Remove the battery cover and battery pack from the monitor
2. Insert the battery power connector
3. Put the tail end of the battery pack into the hinge points at the bottom of the monitor and clip
the top end of the battery pack into the top clips
4. Replace the battery cover on the monitor
Note: The NiMH batteries have a green casing; the Lithium b atteries have a blue casing
2.1.2. Removal
1. Remove the battery cover from the monitor
2. Insert your thumb under the top left hand side of the battery pack and carefully lever the
battery pack out from the retaining clips
3. Unclip the connector from the monitor and remove
2.1.3. Charging Ni-MH Batteries
The life of the battery will be affected by the way it is handled. Take good care of the battery pack and
follow the guideline below.
Ni-MH batteries must be fully charged prior to first-time use. A new Ni-MH battery's full performance is
achieved only after a number of complete charge and discharge cycles. A fully charged battery will
run for approximately 4-6 hours depending on the sensor head being used.
With the adaptor plugged in and unit turned on allow 15 hours for the battery to fully
1 2 3
4
Page | 5
Kanomax Gasmaster User Guide
MRK-D-0002 V3
charge.
• During charging the battery symbol on the display flashes slowly
• The battery can be charged with the sensor head installed or removed from the base.
(Remember to switch off the monitor before removing the sensor head)
• Unplugging the main power will reset the above charging conditions
• The batteries can be charged and discharged many times but will eventually wear out
When the operating time is noticeably shorter than normal, it is time to replace the battery
• It is not necessary to fully discharge the battery. When not using the monitor as a portable
unit, always plug in the mains adaptor to recharge the battery
• If left unused a fully charged battery will discharge itself over time
2.1.4. Charging Lithium Polymer Batteries
A new battery's full performance is achieved only after a number of complete charge and discharge
cycles. A fully charged battery will run for approximately 8 hours depending on the sensor head
being used. Perform charging at temperatures between 0
o
C to 45 oC.
With the adaptor plugged in and unit turned off allow 3 hours for the battery to fully charge.
• Lithium versions show “Lithium Battery” on the initial monitor start up screen.
• The battery can be charged with the sensor head installed or removed from the base.
(Remember to switch off the monitor before removing the sensor head).
• The Lithium Smart Charger displays a red LED light when charging and a green LED
light when the battery is charged when monitor is off.
Note: The unit can be charged when switched on but it will charge more slowly. When the
unit is operating the red LED will remain on, even if the battery is fully changed.
2.1.5. Safety Information
• Do not use the battery pack for any other purpose than operating the Kanomax Gasmaster
•
Do not disassemble or deface the batteries as this may cause burns
•
Do not incinerate or heat as this may cause burns, the batteries may burst or cause the
release of toxic materials
•
Do not short circuit as this may cause burns
•
Use only batteries approved by Kanomax and recharge your battery only with the AC/DC
adaptor supplied with the instrument.
•
Never use any charger or battery that is damaged or worn out
•
Batteries must be recycled or disposed of properly. They must not be disposed of in municipal
waste
•
Never charge the battery in a hermitically sealed container
Page | 6
Kanomax Gasmaster User Guide
MRK-D-0002 V3
2.2. Sensor Heads
Note: Always place the sensor head perpendicular to the air flow to avoid damage to the
sensor.
2.2.1. Sensor Warm Up
Prior to operation the sensor must be warmed up to burn off any contaminants. When the monitor is
first switched on it will warm up for 3 minutes. The reading will then flash for the next 7 minutes to
indicate that the sensor is still in the warm up phase. It is recommended that the monitor is kept in
Stand By mode when not being used to keep the sensor heated and prevent the build-up of
contaminants. If the sensor is new (or unused for long periods) it can take up to 24 hours for the
message “sensor warming up” (or “sensor failure” in older models) to disappear. Should the message
remain after this time, a genuine sensor failure may have occurred. See the trouble-s ho oti ng gui de.
For Ozone Sensor Heads:
• 24hours is a conservative time for an ozone sensor to burn off contaminants and achieve its
stated performance specification. In most instances this will be achieved well within 24hrs.
• The warm up period can be reduced by subjecting the sensor to elevated ozone levels for a
short period. For example, 0.1 ppm of ozone for 5 minutes typically reduces the warm up time
to <30 minutes.
Note: Do not remove the sensor head while the monitor is switched on. This may damage the
unit. If the sensor head is removed under these conditions without AC/DC adapter connected,
the unit will automatically shut down.
2.2.2. Sensor Head Failure
There are three possible sensor failure modes, which will be indicated by one of the following
messages on the display:
“Sensor Failure, Replace sensor” - The sensor head should be replaced as this indicates that there
has been component failure.
“Sensor aging”–This indicates that the sensor has reached the end of its usable life and the sensor
head should be replaced as soon as possible. The measurement readings can no longer be relied
upon to be within specification.
Note: This message will only apply for O3 Low/Ultra Low sensor heads.
“S.F.” – When there is more than one sensor connected, S.F. w il l show for a sensor failure condition.
Outlet
Inlet (meshed)
Keyed connector to ensure
inserted correctly into base
Page | 7
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Scroll down
Scroll up
Enter
Alarm mute
Power button
2.3. Optional Temperature and Relative Humidity Sensor
If the temperature and relative humidity sensor has been purchased, it can be inserted into the PS/2
connector at the base of the monitor. Ensure monitor is turned off before connecting the sensor.
Note: The monitor will still operate with only the temperature
and RH sensor connected.
3. Operation
The following instructions detail the operation and set up of the monitor:
3.1. Model 2710 Display
3.2. Model 2750 Display
Enter
Power button /
Scroll button
USB to Monitor
Cable
Two Way
Adaptor Cable
Temperature &
Relative
Humidity Sensor
Page | 8
Kanomax Gasmaster User Guide
MRK-D-0002 V3
3.3. Powering On and Off
To turn the monitor on: Press and hold the power button until the screen activates. The monitor will
turn on and the display will show KANOMAX GASMASTER and the Model Number and Firmware
Version. If the monitor is configured for use with a Lithium battery, it will also say “Lithium Battery”.
After 5 seconds the display will change to indicate the type of sensor head.
The monitor will then warm up. Once warm up is complete the main dis pla y will ap pear as seen
below:
or
• A battery indicat or will appear at the bottom of the displa y when the monitor is operating
under Ni-MH battery power only. The indicator shows the battery life remaining
• The M and L (Monitor and Location) will only show on the Model 2750
• If a multi sensor is being used the screen will sc roll through the parameter s showing each
reading, only 3 parameters can be shown on the screen at one time
To turn the monitor off: Press and hold the power button for 2 seconds until the monitor beeps.
The display will now be blank and operation of the monitor will cease.
To activate standby mode: With the monitor on, press the power button onc e. This will stop
operation of the monitor; however the sensor will be kept warm.
This mode is used to conserve power between operations but keep the sensor ready to measure the
gas concentration with only a short warm up phase needed. In this mode the display will show the
sensor type and standby symbol.
To return the monitor to operational mode press the power button once.
Note 2: When using a Carbon Dioxide sensor head in standby mode, the sensor runs at full
power and the fan remains on.
3.4. Menu Functions
To enter the set up menu press the enter button on the display. The following menu will appear
depending on the Series of handheld:
O3 ULOW
0. 080
ppm
M 02
O3 UL 0.080
TEMP 21.6C
RH 35.1%
ppm
M 02
Page | 9
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Model 2710 Model 2750
3.4.1. Units
• To enter, scroll down in the set up menu and select “UNITS”. (Found under “MONITOR
SETUP” in the Model 2750)
• Choose between ppm or mg/m
3
via the scroll button and press enter to confirm the unit
selection
• If there is a temperature and humidity sensor attached there is the option to choose from
either °C or °F
3.4.2. Max/Min/Average Measurement Cycle
• To enter, scroll down in the set up menu and select “MAX MIN AV”
• Select “start” to initiate the measurement cycle and return to the setup menu
• Scroll to “EXIT” to return to the main display
• The readings will scroll along the screen
Note: Only three parameters will be shown on the screen at one time.
• In the Model 2750 the “MAX MIN AV” cycle can also be initiated from the main display by
holding down the “scroll down” button for 2 seconds until the unit beeps. Hold down the “scroll
down” button again for 2 seconds to stop the measurement cycle.
• When the “MAX MIN AV” cycle is initiated, the display should read as seen below:
or
EXIT
LOCATION ID
MAX MIN AV
CALIBRATE
MONITOR SETUP
LOGGING SETUP
EXIT
ZERO CAL
UNITS
MIN MAX AV
MUTE KEY
O3 UL
PPM
RD 0.010
MIN 0.005
MAX 0.024
AVE 0.015
O3 UL TEMP RH
PPM C %
RD 0.010 23 50
MIN 0.005 22 50
MAX 0.024 25 56
AVE 0.015 24 54
EXIT
MONITOR ID
UNITS
OUTPUT SENSOR
ALARM POINTS
CONTROL POINTS
MUTE KEY
CLOCK SETUP
Page | 10
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Note 1: The MIN, MAX and AVE readings are the minimum, maximum and average readings
over the period from the start of the cycle.
Note 2: The RD value is the current reading.
Note 3: The speed of the display scrolling is dictated by the slowest sensor. The display will
scroll every time a new set of readings have been taken.
3.4.3. Calibration
To enter, scroll down in the set up menu and select either “ZERO CAL” on the Mo del 2710 or
“CALIBRATE” on the Model 2750. To enter the calibrate menu the “mute” and “scroll down”
button needs to be held down for 2 seconds. From here either “ZERO CAL” or “SPAN CAL” can
be selected.
For more information on how to calibrate the sensor heads please refer to Section 6 of the User
Guide.
3.4.4. Mute Key
• To mute the audible feedback “beeps” that occur when you press a button, scroll down in the
set up menu and select “MUTE KEY”. (Found under “MONITOR SETUP” in the Model 2750)
• Press the enter key to silence the audible feedback “beeps”, the word muted will appear next
to MUTE KEY
• On the Model 2710, if the device is turned off the mute settings will be returned to the default
state and will have to be reset when the monitor is restarted
3.4.5. Location ID (Model 2750)
• To select the location ID, scroll down in the set up menu and select “LOCATION ID”
• The location ID provides a means of identifying the location where a measurement was taken.
This can be used to quickly trace a measurement back to a location
• Location ID is logged for each measurement
• Press “enter” to confirm the ID and return to the set up menu
3.4.6. Monitor ID (Model 2750)
• The monitor ID can be found under “MONITOR SETUP”, scroll down in the monitor set up
menu and select “MONITOR ID”
• Each monitor can be numbered to identify them quickly when more than one is in use
Page | 11
Kanomax Gasmaster User Guide
MRK-D-0002 V3
• Data is tagged with the monitor ID at the time it is downloaded to the PC, so you can use
more than one monitor with a single instance of PC software (27 50 only). Each record in the
database contains date/time, monitor id, location id, sensor type, sensor reading.
• For compatibility purposes the database records for earlier versions of the MODEL 2750
(v5.x) default to monitor ID = 1 and location ID = 1. This cannot be changed.
• Press “enter” to confirm the ID and return to the set up menu
Note: In the Model 2750 data logging mode only the Location ID will be logged. The monitor ID
is loaded to the database at the time of data upl o ad (where it is logged).
3.4.7. Output Sensor (Model 2750)
• If a multi-sensor head is connected, the output sensor selection will determine which sensor
the alarm and control points and buzzer refer to
• The output sensor can be found under “MONITOR SETUP”, scroll down in the monitor set up
menu and select “OUTPUT SENSOR” and select the relevant parameter
• The 0-5v analogue signal will also operate on the selected sensor and measurement range
3.4.8. Alarm Points (Model 2750)
• The alarm points can be found under “MONITOR SETUP”, scroll down in the monitor set up
menu and select “ALARM POINTS”
• Once the alarm set up menu has been entered “ALARM HI” will display
• Press the “scroll up” and “scroll down” buttons to select the correct concentration
• Press “enter” to confirm the change
• Once the high alarm has been set “ALARM LO” will display
• Press the “scroll up” and “scroll down” buttons to select the correct concentration
• Press “enter” to confirm the change
Once the low alarm has been set “BUZZER” display will show. Here you can either enable or disable
the alarm. If the alarm is disabled a “P” will show on the right hand side of the alarm mute symbol on
the main display, highlighting that the alarm has been permanently muted.
• If the concentration reaches above the high alarm point two flashing arrow symbols pointing
upwards will appear on the display, accompanied by a fast beeping sound.
• If the concentration reaches above the low alarm point two flashing arrow symbols pointing
downwards will appear on the display, accompanied by a slow bee ping sou nd.
Note: The alarm can be muted by pressing the mute button on the display screen. However,
this is only a temporary mute and will only mute the alarm during that specific alarm condition.
Page | 12
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Once the concentration has moved back into the alarm limits the settings will reset. To turn of
the mute permanently follow instructions to disable the alarm.
3.4.9. Control Points (Model 2750)
• The control points can be found under “MONITOR SETUP”, scroll down in the monitor set up
menu and select “CONTROL POINTS”
• Once the control points set up menu has been entered “CONTROL HI” will display
• Press the “scroll up” and “scroll down” buttons to select the correct concentration
• Press “enter” to confirm the change
• Once the high point has been set “CONTROL LO” will display
• Press the “scroll up” and “scroll down” buttons to select the correct concentration
• Press “enter” to confirm the change
3.4.10. Clock Setup (Model 2750)
• The clock setup can be found under “MONITOR SETUP”, scroll down in the monitor set up
menu and select “CLO C K SETUP”
• To change the hours press the “scroll up” and “scroll down” buttons until correct time is
recorded
• Press “enter” to confirm and adjust the minutes using the “scroll up” and “scroll down” buttons.
• Repeat to adjust the seconds, month, day and year.
Note: The clock is a 24 hour clock
3.4.11. Logging Setup (Model 2750)
• To enter, scroll down in the set up menu and select “LOGGING SETUP”
• The log frequency will appear on the display.
• Adjust the frequency by using the “scroll up” and “scroll down” buttons
Note 1: The frequency is set to 1 minute intervals
• Once the frequency is set, press the “enter” button to confirm.
• The option to clear the log will then display on the screen.
• Press the “scroll up” button to select either YES or NO and press “enter” to confirm the
selection.
Month: Day: Year
Hours: Minutes: Seconds
14:30:12
Oct 07 12
Page | 13
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Note 2: The data log can also be cleared directly from the main display screen by holding
down the mute button for 2 seconds until the monitor beeps (if the monitor keys are not
muted).
• The display will then give the option to start logging
• Press the “scroll up” button to select either ON or OFF and press “enter” to confirm the
selection and return to the main menu.
Note 3: Data logging can also be both started and stopped directly from the main display
screen by pressing the “scroll up” button for two seconds until the monitor beeps (if the
monitor keys are not muted).
When data logging is initiated a triangle wil l appear on the main display screen.
The triangle is an indication that data logging is active, and is also used as an indication of the
presence of data, as described below:
• An empty triangle indicates that no data is stored
• A filling triangle indicates that some data is stored in the memory. The triangle will fill up in
10% increments.
• A full triangle indicates that the memory is full and needs downloading to the PC.
4. Kanomax Gasmaster Software (Model 2750)
4.1. Set Up
Computer Requirements
• USB to monitor cable
• Window OS version 2000 or later
• Recommended 512 Mb RAM or more
• Recommended 1 GHz processor speed or faster
CLEAR LOG
YES NO
LOGGING
ON OFF
LOG FREQ.
1 MIN
Page | 14
Kanomax Gasmaster User Guide
MRK-D-0002 V3
4.1.1. Connect
1. Connect the Model 2750 monitor to a computer using the cable supplied and turn on
2. Launch the Kanomax Gasmaster PC software and click on the toolbar to search for the
monitor. The unit will be detected automatically and connect
3. Test the connection by clicking on the tool bar. This will display the Monitor Name,
Version and ID Number
4.1.2. Configuration
The Software can be used to set up the Monitor ID, Location Id, Alarm and Control Limits,
Logging Frequency, Units of Measurement, Output Sensor and Updating the Clock.
• Click Monitor Setup (or Ctrl P)
• The monitor setup dialog box will appear
• Type in the required values or scroll up or down to set
the desired values.
• Click the save button to synchronise the monitor
values with those on the PC.
• In order to data log it is essential that the clock on the
monitor is set to the real time. This can be done on
the monitor (Section 4.4.6.) or via the PC by using the
“Update Clock” button in the configuration menu.
Note: If the temperature and humidity sensor is
connected an option to select temperature unit will
appear
4.2. Data Logging
The Model 2750 monitor can log up to 8188 data points divided by the number of sensors being
logged. For example, if a triple sensor is connected it will log 8188/3 readings. Each sensor uses one
of the records each log period. Refer to Section 3.4.11 for instructions on how to log data on the
monitor itself. Alternatively, data can be logged directly to a PC.
4.2.1. PC Data Logging
Ensure that the USB cable is connected to the monitor and to the PC. Click File Start PC Data
Logging or click on the toolbar. The data will be logged directly to the database on the PC. No
data will be stored on the monitor memory in this mode of operation. However, if PC data logging is
stopped by clicking on the toolbar the data will start to be stored in the Model 2750 monitor
Page | 15
Kanomax Gasmaster User Guide
MRK-D-0002 V3
memory.
4.2.2. Downloading Logged Data from Model 2750
Logged data from the monitor memory can be downloaded by clicking File Download Logged Data
or by clicking on the toolbar.
A data download progress bar will appear while the data is downloading. Once that data download to
the PC is complete, the monitor will beep and ask the user whether they wish to clear the logged data
on the monitor. Data logged on the monitor must always be cleared manually otherwise the data from
the monitor’s memory will be duplicated in the database each time a data download is performed.
If for any reason, the data download does not complete, is terminated or stops:
• Turn off the monitor to prevent any data loss.
• Delete the data that has been downloaded to the PC
• Close the PC software program and repeat the downloading process with the monitor on,
connected and with the PC software running.
4.2.3. Graphs
While logging directly to a PC, the Real Time View Graph or the Logged Data Graph can be
accessed via the “Data” menu on the menu bar.
Note: If a multi sensor is plugged in each parame ter will b een shown in individual tabs
1. The graphs can be configured by clicking Data Graph Default Style or by right clicking
on the graph and selecting “Graph Style”
2. Right click on the graphs to save or print the graphs
• Graphs will be saved as a JPG file
3. To reset the graph to the default, right click and
select “Reset to Default”
4. The logged data graph can be viewed be
clicking Data Graph Logged Data
Note 1: In the Logged Data Graph the date, time and
sensor type to be viewed can be selected. The
Monitor and Location ID can also be selected.
Note 2: The Monitor ID is not logged on each record
in the monitor but will be stored in the database
against each measurement when the data is
downloaded. The data will be tagged with whatever the monitor ID is at the time of download.
Conversely, the location ID is logged on each record in the monitor.
Page | 16
Kanomax Gasmaster User Guide
MRK-D-0002 V3
4.2.4. Tables
While logging directly to a PC, the Real Time Table View or Logged Data Table can be accessed via
the “Data” menu on the menu bar.
In the logged data table vie w the date, time and sensor type can be selected to view the relevant
data. The Monitor a nd Location ID can also be selected. Clicking “view all” does not us e t he f i lter and
will show all the parameters and data in the database. Alternatively, clicking “apply” will filter the
parameters and show the chosen data.
1. To export the data, click the “Export” button on the logged table view.
• Select a directory and choose a file form at (either plain text or M S Excel file) a nd enter a
file name. Click “Save” to export the data.
2. The data can be deleted by clicking the “Delete” button on the logged data table view.
• This will delete the individual data points shown in the logged data table from the
database.
4.2.5. Data Analysis
The Daily View is a summary for each day, from midnight to midnight, of the Minimum, Maximum and
Average readings over the 24 hour period.
• Click Data Daily Analysis to launch the Daily View window
• Either select the date range, monitor and location ID and click “Apply” or click “View All” to
show the daily anal ysis.
The summary data files can be exported to programs such as MS Excel by clicking the “Export”
button.
To delete the summary data click the “Delete” button. This will not delete the individual data points
from the database, only the daily summary data.
Page | 17
Kanomax Gasmaster User Guide
MRK-D-0002 V3
4.3. Advanced Data Management
1. To archive logged data, click File Zip Database
• Select a directory and input a file name to backup all the current stored data to a zipped
file
2. To view archived logged data, Click File Unzip Database
• Select the zipped file and click OK.
• View and analyse data as required (Data Table Logged)
Note: To view an archived database it is important that any existing data logging function is
not interrupted. Do not view archived data on the sam e PC being used for data logging; the
current data in the database will be lost unless it has been zipped.
5. External Control Wiring (Model 2750)
The pin numbers for the external output connector are numbered from 1 to 6. Pin 1 is the closest pin
to the power jack.
The pin designations are as follows:
1. 12 V DC
2. Analogue output 0-5 V
3. Control
4. High alarm
5. Low alarm
6. Ground
Page | 18
Kanomax Gasmaster User Guide
MRK-D-0002 V3
The RJ12 connector offers two possibilities for wiring, either a switch to GND or a 12V output. If the
12V output is used, the power for the relay coil is supplied by the Kanomax AC/DC adaptor. In this
case, ensure that the relay coil does not draw more than 150mA and that a protection diode is
inserted across the relay coil.
If the switch to GND output is used, ensure that the relay coil does not draw more than 150mA, that
the voltage does not exceed 24V and that a protection diode is inserted across the relay coil.
5.1. Wiring for Alarm
The high alarm and low alarm pins can be wired to supply simple on / off switching to operate
equipment which requires only an on or off signal, such as an alarm.
To switch to GND use pins 4, 5 and 6. For a 12V output wire to pins 4, 5 and 1 (see the following
diagram for typical wiring for high alarm). This feature will only operate while powered by the AC
adaptor.
High gas level alarm
Note: Failure to insert a circuit pr o tection diode, shown as above, will result in damage to the
monitor if a voltage spike is created by the relay.
5.2. Wiring for Control
The control pin can be wired to supply control of a gas concentration between upper and lower
concentration limits. The upper and lower limits can be set by the user. The factory default settings
are dependent on the gas sensor head selected at time of purchase.
To switch to GND use pins 3 and 6. For a 12V output wire to pins 3 and 1 (see following diagram for
typical wiring). This feature will only operate while powered by the AC adaptor.
Control is achieved by using a software latch. If power is lost to the monitor, the switch will open and
therefore turn off the external device connected to the monitor external output. The following wiring
diagram demonstrates the typical wiring to achieve the required control.
Page | 19
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Note: Failure to insert a circuit pr otection diode, shown as above, will result in damage to the
monitor if a voltage spike is created by the relay.
5.3. Wiring the 0-5 V Analogue Output
The 0 to 5 V signal is a proportional signal based on the measurement of the selected output sensor.
The voltage out spans the specified gas sensor concentration ranges. For example: With the low
concentration ozone sensor head: 0 V represents 0 ppm ozone and 5 V represents 0.Model 2750
ppm ozone. Note: The ultra-low ozone sensor is a special case – 1.5V represents 0.150ppm
ozone in this case.
Note: Wire between pins 2 & 6
See Section 7.1 for output status conditions.
Page | 20
Kanomax Gasmaster User Guide
MRK-D-0002 V3
6. Calibrati on of Se nsor He ads
Sensor heads can be calibrated in two ways:
1. Via replacement. Return your sensor head to Kanomax and purchase a replacement sensor
with a multi-point calibration and new calibration certificate.
2. Manual calibration. The easy calibration procedure is outlined below. Kanomax supp lies a
Calibration Accessory (R42) to facilitate humidity control and delivery of calibration gas to the
sensor head.
6.1. Calibration Procedure
In order to calibrate successfully the following equipment is needed:
• R42 Calibration Accessory
• Inert tubing (Regulator to gas inlet) See table for gas/material compatibility
• 0.5 LPM constant flow regulator (eg Calgaz regulator model 715, flow rate 0.5 LPM)
• Span gas in air cylinder
• Zero grade air cylinder
1. Charge R42 Calibration Gas Accessory with 5g of water with water syringe via water inlet.
2. Fit cylinder and regulator to R42 gas inlet via tubing and Luer attachment.
3. Place warmed up Kanomax sensor head in R42 outlet as shown below. The Kanomax sensor
head is now ready for zero or span calibration.
Note: The inlet of the sensor head should be inserted into the outlet of the R42 (the inlet of the
sensor head has a mesh cover)
Note: The MS1 and MS2 multi-sensor heads require that the sensor head be inserted in
different positions depending on the sensors being calibrated.
Use this orientation for calibrating PID and CO2 Use this orientation for calibrating CO
Page | 21
Kanomax Gasmaster User Guide
MRK-D-0002 V3
6.2. Zero Calibration
Under some circumstances the sensors may temporarily exhibit a baseline reading higher than zero
due to insufficient warm up or cross-sensitivity to other gases. In this case it is also worthwhile
checking against a standard zero air source.
1. Follow the initial set up instructions in 6.1
2. Flow zero air until the reading stabilises (about 10 minutes)
3. Initiate Zero Calibration on the Kanomax Gasmaster by:
• Model 2710: Press and hold the “enter” button until the word “Zeroing” appears next to
ZERO CAL. The routine will run for up to ten minutes (depending on the gas sensor
installed) and then beep to indicate completion.
• Model 2750: : Enter the CALIBRATE menu by pressing the “mute” and “scroll down”
buttons for 2 seconds. From here select “ZERO CAL” then:
o Single gas heads: Toggle YES/NO using scroll button to YES then press enter.
The word “Zeroing” appears and the zero routine will run for up to ten minutes
(depending on the gas sensor installed) and then beep to indicate completion.
o Multi-gas sensor heads and T/RH probe: Press enter to bring up the OFFSET
for the Sensor head. Use the scroll buttons to change the OFFSET and enter
button to accept. Calculate the new OFFSET using the equation below:
New OFFSET = Sensor Reading/GAIN + old OFFSET
Note 1: The Model 2710 can only zero calibrate single gas sensors.
Note 2: Temp/RH offsets are stored on the handheld rath er than on the sensor. All other
offsets are stored on the sensors.
6.3. Span Calibration
Span calibration is only available on the Model 2750. It provides an opt ion to adj us t the GAIN of
Kanomax sensor heads. There are no optimum span concentrations for calibrating Kanomax sensor
heads. There are however a few considerations which can guide the decision as to which span
concentration is most appropriate.
1 23
Page | 22
Kanomax Gasmaster User Guide
MRK-D-0002 V3
For the majority of uses, gases will be purchased for calibration at the concentration to be used for the
span calibration, rather than purchased at high concentrations and later diluted using a gas dilution
calibrator. Therefore users may find some restrictions on what concentrations can be provided by
their chosen calibration gas supplier.
For some applications measurements will be made close to the monitor’s maximum detection limit.
For these applications a span point at 80 % of full scale is suggested. For other applications, gas
levels may be important across a broad range rather than just close to the maximum exposure limit.
Other applications may make more use of the lower end of the sensors working range, with higher
levels occurring less frequently and having less importance. The most appropriate span point will thus
depend upon the intended application. If the intended application is not known, Kanomax suggests a
span point at 80 % of full scale. All gases should be purchased in a balance of air.
* The R42 cannot be used for the calibration of NH3 due a material incompatibility. Contact Kanomax
for advice on calibrating NH3 sensor heads.
** Contact Kanomax for information regarding PERC calibration
Kanomax Sensor Head
Suggested span point
80 % Full Scale (in a
balance of air)
Tubing material
for gas
calibration
Carbon Monoxide 0-25 ppm
20
Tygon R-3606
Carbon Monoxide 0-100 pp m
80
Tygon R-3606
Carbon Monoxide 0-1000 ppm (leak)
800
Tygon R-3606
Carbon Dioxide 0-2000 pp m
1600
Tygon R-3606
Carbon Dioxide 0-Model 27500 ppm
4000
Tygon R-3606
Nitrogen Dioxide 0-1 ppm
0.8
PTFE (Teflon)
NH3 0-100ppm *
NH3 0-1000ppm (leak) *
Hydrogen 0-Model 27500 ppm
4000
H2S 0-10 ppm
8
PTFE (Teflon)
H2S 0-100 ppm
80
PTFE (Teflon)
Methane 0-10000 ppm
8000
PTFE (Teflon)
Ozone (OZU) 0-0.15 ppm
0.12
PTFE (Teflon)
Ozone (OZL) 0-0.5 ppm
0.4
PTFE (Teflon)
Ozone (OZG) 0-10 ppm
8
PTFE (Teflon)
PERC 0-200 ppm *
SO2 0-10 ppm
8
PTFE (Teflon)
SO2 0-100 ppm
80
PTFE (Teflon)
VOC (Isobutylene) 0-25 ppm
20
PTFE (Teflon)
VOC (Isobutylene) 0-Model 2750
ppm
400
PTFE (Teflon)
NMHC (Isobutylene) 0-25 ppm
20
PTFE (Teflon)
PID (Isobutylene) 0-20
16
PTFE (Teflon)
PID (Isobutylene) 0-1000
800
PTFE (Teflon)
Page | 23
Kanomax Gasmaster User Guide
MRK-D-0002 V3
6.3.1. Procedure
1. Follow the initial set up instructions in section 6.1
2. Flow the target gas at 0.5 LPM
3. Measure the gas concentration on the monitor screen and wait for it to stabilise (10 minutes).
4. If the Kanomax s ensor hea d requ ires a s pan adj ustm ent then ent er the CALIBRATE menu by
pressing the “mute” and “scroll down” buttons simultaneously for 2 seconds. Then select
SPAN CAL and change the GAIN us ing th e scr oll buttons . Calcu late the new GA IN us ing the
equation below:
New GAIN = Old GAIN x Span Gas Concentration (ppm) / Sensor Reading
Note 1: Temp/RH GAINs are stored on the handheld rather than on sensor. All other GAINs are
stored on the sensors.
6.4. Bump Test
Operators may wish to have increased confidence in the operation of their monitor by performing a
bump test prior to taking measurements.
A bump test involves quickly exposing the sensor to span gas and confirming the sensor indicates an
elevated response. The equipment for performing a bump test is the same as for performing a span
calibration, however it is not necessary to wait for the monitor to warm up before performing a bump
test, nor is it necessary to wait for the monitor readings to stabilize to confirm a successful bump test.
Turn on the monitor and place it at the outlet of the R42, you will need to wait three minutes before
readings will be displayed on the monitor. Turn on the span gas and observe the sensor reading, the
reading should quickly elevate above the baseline reading and approach that of the span gas
concentration. If the reading does not approach that of the span concentration this could indicate a
monitor fault or the need to perform a calibration. Once an elevated reading has been observed close
to the span gas concentration the gas can turned off, you must then wait for the readings to come
down to baseline level before taking measurements.
6.5. Health and safety during calibration
Upmost care must be taken while performing a zero or span calibration. Cylinder gas can cause harm
in a number of ways. There a number of sources of good information about the correct use and
storage of compressed gases.
The following resources may prove useful:
The National Institute for Occupational Safety and Health
Page | 24
Kanomax Gasmaster User Guide
MRK-D-0002 V3
http://www.cdc.gov/NIOSH/
The United States Department of Labour
http://www.osha.gov/SLTC/compressedgasequipment/index.html
The following information is a guide for what to consider when handling compressed gas but
Kanomax recommends operators adhere to their local regulations regarding compressed gas
handling.
6.5.1. High pressure leak or failure of pressure regulator
Many calibration gases are held in cylinders at high pressure in excess of 1000 Psi. Incorrectly fitting
the pressure regulator, using a regulator which is faulty or knocking the cylinder over while the
regulator is attached can cause physical harm from high speed projectiles resulting from a high
pressure leak from or failure of the regulator.
• It is important to always fit a high quality undamaged pressure regulator to the gas cylinder
and that the regulator type is suitable for the cylinder you are attaching it to.
• Always use protective eyewear (safety glasses) when working with compressed gas.
• Always point the cylinder and regulator away from yourself and others when attaching or
removing the pressure regulator.
• Always secure the cylinder to prevent it from being knocked over while the regulator is
attached.
6.5.2. Flammability of combustible gases
Calibration gas can be stored in cylinders at high concentrations and can this can present a hazard if
those gases are combustible. The lower explosive limit (LEL) is the lowest concentration of gas at
which combustion will be sustained in air if an ignition source (spark or flame) is present. The LELs for
the gases used for calibrating Kanomax sensor heads are all significantly above the calibration span
points so this risk is low. It is important however that the LEL be known for the gas being employed
and that suitable precautions be taken to further minimize the risk from explosive combustion such as
performing the calibration in a fume hood. Table XX lists the LELs for the gases used to calibrate
Kanomax’s sensor heads.
6.5.3. Toxicity
While most of the recommend span points fall below the Immediately Dangerous to Life or Health
(IDLH) limits published by the National Institute for Occupational Health and Safety (NIOSH), some
span points are above these limits and therefore it is crucial that rigorous health and safety
procedures be followed during calibration to avoid exposure to the calibration gas.
The table below lists the IDLH concentration limits as well as concentration limits for longer exposure
times. The LDLH limits are known for most of the gases of concern, however there are some gases
for which data are not available. In these cases gases should be considered as being toxic and
handled as such. Health and safety data are often revised, Kanomax recommends checking external
sources for the most up to date information. Kanomax suggests that all span calibrations be
performed in a fume hood such as the one in the image below to avoid exposure to personal.
Page | 25
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Gas
IDLH (ppm)
PEL (ppm)
STEL (ppm)
LEL (ppm)
Carbon Monoxide
1200
25
N/A
125,000
Carbon Dioxide 40000
Model
27500 30000 N/A
Nitrogen Dioxide
20
N/A 1 N/A
Ammonia (NH3)
300
25
35
150,000
Hydrogen
N/A
N/A
N/A
40,000
Hydrogen Sulfide
100
10
15
40,000
Methane
N/A
N/A
N/A
50,000
Ozone
5
0.1
0.3
N/A
PERC
N/A
N/A
N/A
N/A
Sulphur Dioxide
100 2 5
N/A
Isobutylene
N/A
N/A
N/A
18,000
IDLH: Immediately Dangerous to Life or Health
PEL: Permissible exposure limit (usually based upon a time weighted 8 hour average
STEL: Short - term exposure limit ( 1 hour average)
LEL: Lower explosion limit
Source: http://www.cdc.gov/niosh/idlh/intridl4.html 21/06/2013 (always check for latest
information)
Page | 26
Kanomax Gasmaster User Guide
MRK-D-0002 V3
7. Specifications
The Kanomax Gasmaster has been specifically designed to incorporate Kanomax’s in-depth
knowledge of accurate ambient gas measurement and can be used with a wide range of gas sensor
heads. The sensor heads are interchangeable and therefore multiple heads can be used on the same
base unit. The sensors are calibrated prior to delivery.
Gas measurement units
ppm or mg/m3
Reading functions
Minimum, maximum, average
Sensor head
Interchangeable, replaceable
Display type
LCD
Display status indicators
Battery, sensor, standby, mute, high/low alarm,
monitor ID, location ID.
Sensor calibration features (MODEL 2750)
Zero and span via secret menu
Power supply
12V DC (power adaptor/charger supplied 100250V AC)
Rechargeable battery
Ni-MH 9.6V DC | 2100mA/h or Lithium 11.1V
Temperature & Humidity sensor
Temp: -40°C to 124°C; RH: 0 to 100%
Size (with sensor head)
195 x 122 x 54 (mm)
Weight (with sensor head and battery)
< 460 g
Environmental operating conditions
Temperature: -5 oC to 45 oC
Humidity: 0 to 95% non-condensing
Enclosure material and rating
PC and ABS; IP20 and NEMA 1 equivalent
Audible Alarm (MODEL 2750)
Low alarm, high alarm
External transistor outputs for alarms &
control (MODEL 2750)*
12 VDC or switch to GND (150 mA max)
Analogue output (MODEL 2750)
0-5V
Digital interface (MODEL 2750)
RS232 with USB converter
Data logging capacity (MODEL 2750)
8188 data points in total
PC data logging (MODEL 2750)
Software and data cable supplied
Clock function (MODEL 2750)
Real time
Approvals
Part 15 of FCC Rules
EN Model 275082-1: 1997
EN Model 275081-1: 1992
*All of the transistor outputs are open collector current sink. The maximum rating of these transistor
outputs is 12VDC at 150mA. Should you connect a relay or any other inductive load to the transistor
outputs, a back EMF suppression diode must be fitted across the load.
Kanomax accepts no responsibility for damage to this product or any other issues arising from the
non-compliance with the above directives. Failure to implement these directives will invalidate the
warranty on this product.
Page | 27
Kanomax Gasmaster User Guide
MRK-D-0002 V3
7.1. Diagrams
Page | 28
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Temp/RH sensor
connection
Power Connection
7.2. Optional Extra: Handheld Enclosure
The handheld FRP enclosure is designed for fixed or secure monitoring. The inlet nozzles are
specifically designed to eliminate dust and reduce water ingress whilst minimising destruction of part
per billion gas concentrations or measurement variations due to outgas contamination from the
enclosure. The sensor heads are specifically calibrated to take into account the lo nger f lo w path.
Sensor heads fitted to this product must be the Type 2 sensor heads that are capable of operating
with the longer flow path.
7.2.1. Specifications
Dimensions
Height (including cable gland) 283 mm
Width 180 mm
Depth 90 mm
Materials
Fibre-glass reinforced polycarbonate base
Polycarbonate lid
Mounting
Screw fixture
Operating temperature
-35°C to 120°C
7.2.2. Replacing the Sensor Head
1. Undo the four lid screws at each corner using a flat headed screw driver and remove the lid.
Outlet
Inlet
Data logging
connection
Page | 29
Kanomax Gasmaster User Guide
MRK-D-0002 V3
2. Unscrew and remove the inlet and outlet nozzles and threaded lock nuts on either end.
3. Remove the sensor head by carefully pulling it upwards, disconnecting it from the monitor.
4. Replace the sensor head.
5. Re-insert the nozzles and tighten using the lock-nuts on either end and ensure there is a tight
fit against the sensor head.
6. Replace the lid and tighten the four lid screws.
7.2.3. Removing the Monitor
1. Undo the four lid screws at
each corner using a flat
headed screw driver and
remove the lid.
2. Loosen the lock nuts on either
end of the sensor head.
3. Depress the blue plastic clips
on either side of the monitor
unit and then lift the monitor
up.
4. This will expose the
rechargeable battery and also allow the mounting screws holding the blue battery cover to be
accessed.
5. Carefully disconnect the monitor from the sensor head and remove from the enclosure.
6. Reverse the process to r econnect the monitor back onto the battery cover.
8. Troubleshooting
Lock Nut
Lock Nut
Page | 30
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Fault Description Possible cause Remedy
No power
Lead connection broken
Power supply failure
Battery flat
Unit damaged
Sensor head damaged
Reconnect power lead
Replace 12V DC power supply
Recharge battery
Replace unit
Replace sensor head
Sensor failure when
the sensor is new
Insufficient warm up
Air contaminated
Sensor damaged
Run the sensor on full power for 24-48
hours. If using an ozone sensor head
and an O3 source is available, exposure
to 100 ppb for 5 minutes will speed up
the decontamination process
(approximately 30 minutes)
Move the sensor to cleaner environment
and check reading
Replace sensor
Reading high under
zero gas conditions
Background gas level higher
than normal
Interfering gas present
Sensor zero drift
Sensor damaged
Move sensor to clean air and
check reading is zero or close to zero
Move sensor to clean air and
check reading is zero or close to zero
ZERO CAL sensor zero grade air using
R42
Replace sensor
Reading higher than
expected in the presence of
sensor gas
Sensor correct
Interfering gas present
Sensor calibration lost
Check calibration of gas generator.
Move sensor to clean air and check
reading upon exposure to known gas
concentration
Replace /refurbish sensor
Reading lower than expected
reading in the presence of
sensor gas
Sensor correct
Sensor inlet contaminated
Sensor fan failed
Interfering gas present
Check calibration of gas generator
Clean sensor inlet filter and mesh
Replace sensor
Move sensor to clean air and check
reading upon exposure to known gas
Page | 31
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Gas reactive and de-composing
before detection
Local air flow too high (ozone
sensors) or too low (VOC and
ammonia sensors)
Sensor calibration lost
concentration
Move the monitor closer to them source
of the gas
Modify the airflow into and around
sensor head.
Replace /refurbish sensor
Reading unstable
Power supply unstable
Power supply current rating
incorrect
Local air flow too high
Environmental conditions
fluctuating
EMI noise picked up via USB
cable and PC (MODEL 2750
unit only)
Install stable power supply
Install power supply with correct
rating
Reduce air flow
Reduce fluctuations
Unplug cable to determine if this
reduces the instability. If this solves the
problem then isolate the power on PC
External alarm and control
doesn't work correctly (Model
2750 units only)
Incorrect RJ12 pins used
No diode across external relay
coil
Diode polarity incorrect
Check pins and wire correctly
Fit diode across external relay coil
Fit diode correctly
USB communications unstable
(MODEL 2750 only)
Connections broken
COM Port settings incorrect
Clock setting incorrect
Reconnect leads
Setup COM port correctly
Synchronise clock with PC. If this does
not work then the Monitor clock battery
may be flat. Return monitor to Kanomax
for battery replacement.
8.1. Sensor Failure
The handheld monitors have inbuilt diagnostics to detect sensor faults. If the sensor fails it can be
Page | 32
Kanomax Gasmaster User Guide
MRK-D-0002 V3
easily replaced by simply removing and installing a new one. The failed sensor can be sent back to
Kanomax for refurbishment or disposal. Monitor status conditions are as follows:
Fault
Description
LCD Screen
0-5V
Output
(MODEL
2750 only)
Control
Output
(MODEL
2750 only)
Low Alarm
Output
(MODEL
2750 only)
High
Alarm
Output
(MODEL
2750 only)
Data
Logging
(MODEL
2750 only)
No Fault
Valid gas
reading
Reading
proportional
to gas
reading
As set by
user
As set by
user
As set by
user
Valid gad
reading
Sensor Failed
Fault
Sensor failure 5 V Open Closed Closed 9999
Sensor Aging
Fault
Valid gas
reading +
sensor aging
Reading
proportional
to gas
reading
As set by
user
As set by
user
As set by
user
Valid gad
reading
Communications
Failure
SENSOR
NOT
CONNECTED
or N.C. or
turn off when
use Ni-MH
battery only
0 V Open Open Open No output
Sensor Standby
Standby
symbol
0 V Open Open Open No output
8.2. Technical Support
Technical information, service and spare parts are available through your distributor. In addition,
worldwide technical support is available from Kanomax USA, Inc..
Please contact:
Kanomax USA, Inc.
219 US Hwy 206, Andover, NJ 07821
Phone: 973-786-6386
Fax: 973-786-7586
Email: info@kanoamx-usa.com
Page | 33
Kanomax Gasmaster User Guide
MRK-D-0002 V3
9. Guidelines on How to Measure Ozone
The following information is presented to help users operate their Kanomax Gasmaster with an ozone
sensor installed in the most effective and efficient manner.
General
• Ozone is heavier than air and tends to sink. Thus detection of leaks from ozone generating
equipment should be performed at the most appropriate position.
• Ozone will react and decompose on surfaces such as walls, furniture etc.
• Smell is not a reliable test for the presence or concentration of ozone as the odour
threshold varies widely between peo ple and is affected by local ambient conditions.
Permanent Controller Placement
• The Kanomax Ozone Controller has been designed to measure the ambient concentration
of ozone. The controller must not be placed directly in an ozone stream.
• For indoor local area monitoring attach the controller to an inert surface with the inlet
unobstructed.
• For leak detection mount the unit near the ozone equipment.
• Ensure that the controller is protected from excessive water splashing, dust, vibration,
excessive heat or cold, high concentrations of ozone and ex c es sive s wings in hu midity.
False Readings
• The Kanomax Ozone Controller has been designed to respond selectively to ozone.
However, other oxidizing gases such as chlorine and nitrogen dioxide can generate false
readings if they are at high concentrations. High concentrations of hydrocarbon gases
such as vapours of alcohol, oils and solvents can reduce and mask the concentration of
ozone.
Page | 34
Kanomax Gasmaster User Guide
MRK-D-0002 V3
10. Care and Maintenance
Your Kanomax Gasmaster is a product of superior design and quality and should be treated with care.
When using your Kanomax Gasmaster:
• Keep it and all its parts and accessories out of the reach of small children.
• Keep it dry. Avoid water and/or condensation as humidity and liquids may damage sensitive
electronics and the Li battery.
• Do not use or store in dusty, dirty areas.
• Do not store the monitor in temperatures below 10°C or above 35°C.
• This unit is designed for use at temperatures between -5°C and +45°C however please consult
recommended operating temperature for the sensor head which may be different. Avoid sudden
changes in temperature which may cause condensation that can damage the electronics.
• Do not attempt to open. Non-expert handling of the device may cause damage.
• Do not drop, knock or shake as this could lead to internal damage.
• Do not use harsh chemicals, cleaning solvents or strong detergents for cleaning. Wipe with a soft
cloth slightly dampened with a mild soap-and-water solution
In order to maintain measurement accuracy, Kanomax recommends that users replace or
refurbish their sensor heads on a yearly basis or more often if measurement certainty is
critical for your application. Please contact your dealer or Kanomax.
10.1. Disposal / Recycling
Please note that this is an electronic product and disposal should be in line with your local or country
legislation. The plastic casing of the product is made from a Polycarbonate / ABS blended material
(PC + ABS) and is marked accordingly.
Page | 35
Kanomax Gasmaster User Guide
MRK-D-0002 V3
11. Appendix
11.1. Copyright
Copyright Kanomax USA, Inc. All rights reserved. Reproduction, transfer, distribution or storage of
part or all of the contents of this document in any form without the prior written permission of
Kanomax USA, Inc. is prohibited.
Kanomax operates a policy of continuous development. Kanomax reserves the right to make changes
and improvements to any of the products described in this document without pr ior notic e .
Under no circumstances shall Kanomax be responsible for any loss of data or income or any special,
incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or
contents of this document.
Kanomax reserves the right to revise this document or withdraw it at any time without prior notice. The
availability of particular products may vary by region. Please check with the Kanomax dealer nearest
to you.
11.2. Software License
The Model 2750 monitor comes supplied with Kanomax data logging software. Kanomax will retain
ownership of all intellectual property in the Software. The buyer acknowledges that they are granted a
perpetual, non-exclusive, non-transferable license for the right to use the Software for the buyer’s
exclusive use and only in conjunction with Kanomax Products (Intended use). The buyer will strictly
adhere to the Intended Use of the Software and will not translate, adapt, reverse compile or otherwise alter the Software. The buyer undertakes not to disclose, assign, sell, rent, lend, sub license or
otherwise transfer the Software.
11.3. Terms and Conditions
For warranty inform ation, pl eas e cont act your Kan omax Distributor.
11.4. Statements of Compliance
1. The Kanomax Gasmaster Models 2710 & 2750 Monitors and Remote Adaptor Kit
comply with EN Model 275082-1:1997
2. The Kanomax Gasmaster Models 2710 & 2750 Monitors and Remote Adaptor Kit
comply with EN Model 275081-1:1992
Page | 36
Kanomax Gasmaster User Guide
MRK-D-0002 V3
3. The Kanomax Gasmaster Models 2710 & 2750 Monitors and Remote Adaptor Kit comply
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
these devices may not cause harmful interference, and (2) these devices must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harm ful interference in a residential installation. T his equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to tr y to correct the interf erence by one or mor e of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the e quipment int o an outlet on a circuit differ ent from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Page | 37
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Loading...